Home / Learn / Exam prep / IIT JAM Physics / Lesson 2.6
All lessons

Module 2: Mechanics and properties of matter · Lesson 2.6 · about 45 min

Rotation, rolling and angular momentum

Torque and angular acceleration, rotational energy, conservation of angular momentum, rolling without slipping and the friction it needs, skidding balls that start to roll, pulleys and hinged rods, impulses and the sweet spot, and the precession of a gyroscope.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Module 2 · about 45 minutes. By the end you will be able to choose the right point to take torques about, solve pulley, hinged-rod and rolling problems in a few lines, decide which way friction acts on a rolling body, use conservation of angular momentum in collisions, and explain why a spinning top does not fall.

Every rotation problem is two equations, one for the centre of mass and one for turning about it, and the art is choosing the point about which a troublesome force has no torque.

1. The rotational toolkit

You met the moment of inertia in lesson 2.5. For rotation about a fixed axis, every straight-line formula has a twin:

Straight line Rotation about a fixed axis
F=ma τ=Iα
p=mv L=Iω
K=12mv2 K=12Iω2
work ∫Fdx work ∫τdθ, power τω

Torque about a point O is τ→=r→×F→, with r→ from O to where the force acts; its size is force times the perpendicular distance from O to the line of the force. Two rules decide most problems:

  • τ→ext=dL→/dt holds about a fixed point or about the centre of mass (even when the centre of mass accelerates), but not about an arbitrary moving point.
  • A force has no torque about any point on its line of action. Take torques about the point where the unknown force acts and it drops out.

Worked example (pulley with mass). A 2 kg block hangs from a string wound on a uniform disc pulley of 4 kg. Block: mg−T=ma. Pulley: TR=12MR2(a/R), so T=12Ma. Adding, a=mg/(m+M/2)=4.9 m/s². The pulley acts like extra mass I/R2.

τ = r × F
how strongly a force turns things about a chosen point
L = Iω (fixed axis)
the amount of rotation, which only an external torque can change
I/R²
the extra "mass" a wheel or pulley adds to a straight-line problem
Physical meaning
Turning has its own inertia, momentum and energy, linked by the same rules as pushing. Torque is to spin what force is to motion.

2. Hinged rods and the hinge force

A uniform rod of length L hinged at one end and released horizontally:

  • angular acceleration at release: α=mgL/2mL2/3=3g2L;
  • the centre accelerates down at αL/2=3g/4, so the hinge pushes up with only mg/4;
  • passing the vertical: ω=3g/L (energy), α=0, and the hinge force is mg+mω2L/2=52mg.

A rod standing on a hinge that topples hits the ground with its tip moving at 3gL, faster than a stone dropped from the same height.

3. Rolling without slipping

Rolling without slipping means the contact point is momentarily at rest: vcm=ωR. The top of a wheel moves at 2v, the bottom at zero. The motion is pure rotation about the contact point, so

K=12Mv2+12Iω2=12Mv2(1+IMR2),aslope=gsin⁡θ1+I/MR2

The quickest derivation of the slope result is torques about the contact point, where friction and the normal force have no torque: MgRsin⁡θ=(I+MR2)α.

Four bodies, four identical slopes, released together. The solid sphere (I/MR² = 2/5) always wins and the ring (1) always loses, whatever their masses and radii. Change the angle: the order never changes.

Which way does friction act? Ask what would happen without it. On a slope, gravity alone would make the body slide without turning, so static friction acts up the slope to spin it up: f=Mgsin⁡θ1+MR2/I. For a solid cylinder f=13Mgsin⁡θ, so rolling needs μ≥13tan⁡θ. On level ground at constant speed, friction is zero. Static friction on a rolling body does no work, because it acts on a point at rest.

4. Skidding, then rolling

A bowling ball released sliding with no spin skids at first. Kinetic friction μmg slows the centre and spins the ball up until v=ωR. You can follow the times, but the final speed comes faster from one conserved quantity:

Pick the point. Choose any fixed point on the floor along the line of contact. Friction acts along the floor through it, and gravity and the normal force cancel.

Angular momentum is kept about it. Before: m v₀ R (the centre moves at height R above the floor; no spin).

After. L = m v R + I ω = m v R + (2/5) m R² (v/R) = (7/5) m v R.

Result. v = 5v₀/7, whatever the friction coefficient. The ball loses 2/7 of its kinetic energy as heat while skidding.

With backspin ω0, the same method gives v=(5v0−2ω0R)/7: with enough backspin (ω0R>2.5v0) the ball comes back, the snooker “screw shot”. A disc spun up and set down on the floor with no forward speed ends up rolling at ω0R/3.

5. Conservation of angular momentum

With no external torque about an axis, L about it is constant. Inside a system, forces come in equal and opposite pairs along the same line, so they cannot change the total.

  • Skater or diver: I1ω1=I2ω2. The kinetic energy L2/2I goes up when I goes down; the extra comes from the work her muscles do.
  • Coupling two wheels: ω=I1ω1/(I1+I2); a fraction I2/(I1+I2) of the energy is lost, the rotational twin of a perfectly inelastic collision.
  • Collisions with a pivot: a bullet hitting a hanging rod. The pivot pushes during the impact, so linear momentum is not kept, but angular momentum about the pivot is.
  • Free bodies: a puck hitting a rod on ice. Use momentum for the centre of mass and angular momentum about the new centre of mass.

Worked example. A 10 g bullet at 300 m/s lodges in the bottom of a 3 kg, 1 m rod hanging from a pivot at its top. 0.01×300×1=(13×3×12+0.01×12)ω, so ω=3/1.01=2.97 rad/s.

The sweet spot. Strike a hanging rod at distance x below the pivot. The pivot feels no impulse if x=Ipivot/(Md)=2L/3, the centre of percussion. A ball struck at 7R/5 above the floor rolls at once without needing friction.

“A rolling ball is slowed down by friction.” Static friction on a ball rolling at constant speed is zero, and it does no work even when it acts. Real balls slow down because the ball and floor deform a little (rolling resistance) and because of air drag. Kinetic friction does slow a ball that is skidding, until it starts to roll.

6. Precession: why a top does not fall

A fast top with spin angular momentum L→ (size Iω) tilted at an angle feels gravity’s torque mgrsin⁡θ, horizontal and at right angles to L→. Since dL→=τ→dt, the torque only swings L→ sideways: the axis sweeps round a cone instead of falling.

Ω=mgrIω

The tilt cancels, and a slower spin precesses faster, which is why a top wobbles more and more as it slows. Gyroscopes in phones and spacecraft use the same dL→=τ→dt. For the full theory with the inertia tensor and Euler’s equations, see GATE rigid body dynamics.

To check a body’s moment of inertia, use the moment of inertia calculator; to see friction and rolling on a slope, try the friction ramp.

  • τ=Iα, L=Iω, K=12Iω2, power τω. τ→=dL→/dt about a fixed point or the centre of mass.
  • Take torques about the point where an unknown force acts. Pulleys add I/R2 to the mass.
  • Hinged rod from horizontal: α=3g/2L, hinge force mg/4 at release; ω=3g/L and hinge force 52mg at the bottom.
  • Rolling: v=ωR, a=gsin⁡θ/(1+I/MR2); friction on a slope points up it and does no work; on level ground at constant speed it is zero.
  • Skid to roll: angular momentum about a floor point; a solid ball ends at 5v0/7, losing 2/7 of its energy.
  • No external torque: Iω constant; kinetic energy need not be. Pivoted collisions keep L about the pivot, not momentum.
  • Precession of a fast top: Ω=mgr/Iω.

Practise: exam questions on this lesson

They start easy and climb to top-rank level. More on the rotation practice page.

Before this: lesson 2.5, moment of inertia. Next: lesson 2.7, elasticity, where solid bodies stop being perfectly rigid.

Go deeper: GATE’s rigid body dynamics handles tops and gyroscopes with Euler’s equations, and Lagrangian mechanics treats rolling as a constraint.

Check yourself

1A solid ball is launched sliding along a rough floor at v₀ with no spin. When it starts rolling without slipping, its speed is
2A uniform rod hinged at one end is released from rest in a horizontal position. Its angular acceleration at that moment is
3A ball rolls without slipping at constant velocity on a level floor. The friction force on it is

Sources

  • D. Kleppner and R. Kolenkow, An Introduction to Mechanics, 2nd ed. (2014), chapters 7 and 8: angular momentum and rigid body motion
  • J. R. Taylor, Classical Mechanics (2005), chapter 10: rotational motion of rigid bodies
  • H. C. Verma, Concepts of Physics, Part 1 (1992), chapter 10: rotational mechanics
  • IIT JAM Physics syllabus (Mechanics and General Properties of Matter), published by the organising IIT each year

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Not affiliated with IIT or the JAM organising institute. Exam pattern as published for recent years: always check the official JAM website before the exam. All questions are original.