Module 1: Mathematical methods · Lesson 1.1 · about 40 min
Calculus refresher: limits, Taylor series and approximations
The calculus every JAM physics question leans on: limits by series instead of guesswork, Taylor and binomial expansions, the first-order approximations physicists use everywhere, when a series converges, and the gamma and Gaussian integrals.
Module 1 · about 40 minutes. By the end you will be able to find tricky limits in a few lines by expanding in series, write down the Taylor series of the standard functions from memory, make the first-order approximations that turn hard physics into easy physics, tell whether a series converges, and evaluate the gamma and Gaussian integrals that appear in thermal and quantum physics.
1. Why physicists care
Almost every formula you will meet in this course was born as an approximation. The pendulum period assumes . Classical kinetic energy is the first term of . Ohm’s law, Hooke’s law and the ideal gas law are first terms of something more complicated. The tool behind all of them is one idea: replace a function by the first few terms of its Taylor series.
JAM tests this in three ways: limits that look like , “which approximation is correct” questions, and numerical estimates where the exact formula is messy but the first-order one is not.
2. Limits: the standard ones and the series method
A limit asks what heads towards as approaches a point, whether or not is defined there. Three limits are worth knowing by heart:
For anything harder, expand everything in series and keep the first term that does not cancel. It is faster and safer than L’Hôpital’s rule, which often needs three or four rounds of differentiation.
Worked example. Find .
- Expand: and
- Subtract: the terms cancel, leaving .
- Divide by : the limit is .
Notice what would have gone wrong with the “split” idea: and each blow up, so you cannot take their limits separately.
Indeterminate forms. , , , , , and do not have automatic answers. For the last three, take a logarithm first: if then , which is a form you can handle. That is how and come out.
Explore any limit visually in the limit zoom tool, and see a derivative appear as the limit of secant slopes in derivative slope.
3. Taylor series: a polynomial that copies a function
If is smooth near , it equals its Taylor series there:
With it is called a Maclaurin series. Why does this work? Step through it:
Guess a polynomial. Suppose f(x) = c₀ + c₁x + c₂x² + c₃x³ + … near x = 0.
Match the value. Put x = 0: every term but the first vanishes, so c₀ = f(0).
Match the slope. Differentiate once and put x = 0: c₁ = f′(0).
Match the curvature. Differentiate twice: 2c₂ = f″(0), so c₂ = f″(0)/2!.
And so on. Differentiating k times leaves k! ck, so ck = f(k)(0)/k!. Each extra term makes the polynomial agree with f to one more derivative.
The series you must know without thinking:
| Function | Maclaurin series | Converges for |
|---|---|---|
| all | ||
| all | ||
| all | ||
| (any real ) | ||
and have the same terms as and but every sign positive. Change the function and the order below and watch the polynomial wrap itself round the curve. For and , push “check at x” beyond 1 to see what the radius of convergence means.
- f(a)
- where the function is: the zeroth-order picture
- f′(a) h
- the straight-line (first-order, linear) correction: the tangent
- f″(a) h²/2
- the bend: it decides whether a minimum is a minimum, and gives the spring constant of small oscillations
- Radius of convergence
- how far from a the series still works; it ends at the nearest point where f misbehaves
- Physical meaning
- Linear laws (Hooke, Ohm) are first-order Taylor terms. Small oscillations are second-order terms. Anharmonic effects, thermal expansion and relativistic corrections are the next terms.
4. The binomial approximation: physics in one line
The single most useful line in this lesson is
It works for any real : negative, fractional, anything. The trick is to rewrite the quantity so that a “1 + small” appears.
Worked example. Far from a ring of charge (radius ), how does its axial field differ from a point charge?
- Take out the big part: .
- So .
- Binomial with : .
Far away it is a point charge, and the first correction weakens it slightly. Examiners love this style; the wrong options usually carry the wrong sign or a missing factor.
Worked example. Gravity at height is . A 1% drop needs , so km for the Earth.
“If the terms of a series go to zero, the series converges.” Wrong. The harmonic series has terms that shrink to zero, but it grows without limit (like ). Terms going to zero is necessary, never sufficient.
5. Does the series converge?
A series converges if its partial sums settle to a limit. The tests that settle almost every JAM question:
- -series: converges only for . So converges; and diverge.
- Ratio test: if , the series converges for and diverges for (no verdict at ). It gives the radius of convergence of a power series.
- Alternating series: if the terms alternate in sign and shrink steadily to zero, the series converges, and the error after stopping is smaller than the first term left out.
- Geometric series: for . Differentiating it gives , the trick behind the mean energy of a quantum oscillator.
Absolute and conditional. converges, but does not: the convergence is conditional, and reordering the terms can change the sum. Absolutely convergent series can be reordered freely.
6. Two integrals you will meet everywhere
The gamma function. For :
So and .
The Gaussian. . Its relatives come from differentiating with respect to :
Worked example. Find . The full-line integral with is ; the integrand is even, so half of it is . These integrals give the Maxwell speed distribution and the ground state of the harmonic oscillator. Lesson 1.3 shows where comes from.
- For a limit, expand in series and keep the first term that survives; take logs for , and forms.
- Taylor: . Learn the series of , , , , and , with their ranges.
- for any real : factor out the big part first so that “1 + small” appears.
- Terms going to zero do not make a series converge; needs .
- , , over the whole line.
Practise: exam questions on this lesson
They start easy and climb to top-rank level. Check each answer, then read the full solution. More on the calculus practice page.
Next: lesson 1.2 extends derivatives to functions of several variables: partial derivatives, Jacobians and exact differentials. Taylor series come back in simple harmonic motion (every small oscillation) and in complex numbers (Euler’s formula). Expand binomials term by term in the binomial expansion tool and plot any function in the graphing calculator.
Go deeper: for GATE and CSIR NET, power series return in series solutions: Legendre, Bessel and Hermite and, as Laurent series, in analytic functions and Cauchy’s theorem.
Check yourself
Sources
- M. L. Boas, Mathematical Methods in the Physical Sciences, 3rd ed. (2006), chapter 1: infinite series, power series
- G. B. Arfken, H. J. Weber and F. E. Harris, Mathematical Methods for Physicists, 7th ed. (2013), chapter 1
- G. B. Thomas, Calculus, 14th ed. (2018), chapters on limits and Taylor series
- IIT JAM Physics syllabus (Mathematical Methods section), published by the organising IIT each year
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Not affiliated with IIT or the JAM organising institute. Exam pattern as published for recent years: always check the official JAM website before the exam. All questions are original.