Module 4: Electricity and magnetism · Lesson 4.4 · about 45 min
Dielectrics and capacitors
Polarisation and bound charge, the displacement field D and Gauss's law for free charge, linear dielectrics and their boundary conditions, capacitors of every shape with slabs and layers, stored energy, the pull on a slab with the battery connected or removed, and the dielectric sphere.
Module 4 · about 45 minutes. By the end you will be able to find bound charges from a polarisation, use to skip them, apply the boundary conditions at a dielectric interface, compute the capacitance of any parallel-plate, spherical or cylindrical capacitor with slabs and layers, track energy when a battery is or is not connected, and find the force that pulls a slab in.
1. Polarisation and bound charge
In a field, the electron cloud of each atom shifts a little against the nucleus (or polar molecules turn to line up). Each becomes a small dipole. The polarisation is the dipole moment per unit volume, in C/m².
A polarised material is equivalent to two sets of charge:
Picture uniform in a slab: inside, the head of each dipole sits next to the tail of the next and they cancel; on the face the arrows point to there is an uncovered layer of ends, on the opposite face of ends. Where spreads out (positive divergence), more tails than heads are left behind: negative . The bound charges always total zero.
Worked example. in a sphere of radius : and . Check: .
2. The displacement field D
The field comes from all charges, free and bound. Since bound charge depends on the field, it is easier to define
Gauss’s law for needs only the free charge, which you control. In a linear dielectric , so with (water about 80, glass 5 to 10, air 1.0006).
Worked example. A point charge in a big block of dielectric : , so . The charge looks like because a shell of bound charge gathers right round it.
- P
- how strongly the material is polarised: dipole moment in each cubic metre
- σ_b, ρ_b
- the uncovered ends of the dipoles; real charge, but tied to molecules
- D
- a field whose sources are free charges only; it lets you use Gauss's law without knowing P first
- κ = ε_r
- the factor by which a material that fills all the space weakens the field of given free charges
- Physical meaning
- A dielectric fights the field that polarises it: the bound charge it exposes points the opposite way to the applied field, so the field inside is smaller and the same voltage stores more charge.
“D is like E, but you use only free charges in Coulomb’s law.” No. , but , which is not zero in general (at the edges of a polarised bar, for instance). Gauss’s law for is useful only when symmetry alone fixes the direction of : planes, cylinders, spheres.
3. Boundary conditions
At a boundary with no free charge, a thin loop and a thin pillbox give
So field lines bend: , away from the normal entering the higher-permittivity side. At going from into , and .
Three standard shapes in a uniform field : a slab across the field has (continuity of ); a slab along the field has (continuity of ); a sphere has a uniform
As this becomes the metal sphere of the previous lesson: , . A uniformly polarised sphere with no outside field (an electret) has , the depolarising field. Microscopically, each molecule feels , which leads to the Clausius-Mossotti relation .
4. Capacitors
, found by putting on the conductors, finding (or ) by Gauss’s law, and integrating for .
| Shape | Capacitance (filled with ) |
|---|---|
| Parallel plates, area , gap | |
| Concentric spheres | (isolated sphere: , ) |
| Coaxial cylinders, per length |
Partial filling. Layers stacked across the gap are in series (same , voltages add); regions side by side are in parallel (same voltage, charges add).
- A slab of thickness in a gap : , wherever it sits in the gap.
- Two equal layers , : . Two halves side by side: .
- A permittivity that varies smoothly across the gap: .
Worked example. Gap 5.0 mm, area 0.010 m², slab 2.0 mm thick with : effective gap mm, so pF.
The bound charge on a dielectric face next to a plate with free density is , opposite in sign. Between two different layers there is a net bound charge too: with next to the plate and beyond it, the interface carries . The capacitor and inductor calculator handles plates with one or two dielectric layers, coaxial cables and spheres.
5. Energy, and battery connected or not
The stored energy is , or per unit volume. Before any capacitor question, ask what is held fixed.
| Slab of slid in to fill the gap | ||||
|---|---|---|---|---|
| Battery connected ( fixed) | same | same | ||
| Isolated ( fixed) | same |
With the battery connected the battery does work : half is stored, half goes into pulling the slab. Joining a charged capacitor to an uncharged one always loses energy, , whatever the wires; charging any capacitor from a battery wastes exactly half of what the battery gives.
6. The force that pulls a slab in
A slab partly inside a capacitor is pulled in by the fringing field at the edge. Energy gives it without looking at the fringe: with the slab a length inside plates of width , .
Isolated (Q fixed). No battery, so the force is −dU/dx with U = Q²/2C: F = (Q²/2C²) dC/dx. The energy falls as the slab enters.
Battery connected (V fixed). Now the battery also does work. Counting it, F = +½V² dC/dx, even though U = ½CV² rises.
Put in the capacitance. dC/dx = ε₀w(κ − 1)/d, so at fixed V: F = ε₀(κ − 1)wV²/2d, the same at every x.
A liquid rises. Vertical plates dipped in an oil: the same force holds up a column of height h = ε₀(κ − 1)V²/(2ρgd²).
Worked example. Plates 10 cm wide, gap 2.0 mm, 200 V, : N.
Leaky capacitors. Fill any capacitor with material of permittivity and small conductivity : the charge leaks with time constant , whatever the shape (lesson 4.8 does RC circuits in full).
- , , total bound charge zero.
- , ; linear: , .
- Boundaries: and continuous; . Sphere in : .
- : plates , spheres , coax . Layers in series, side by side in parallel; slab: .
- Battery connected: . Isolated: . Battery work ; sharing charge always loses energy.
- Slab force at fixed : . Bound charge next to a plate .
Practise: exam questions on this lesson
These start easy and climb to top-rank level. Check each answer, then read the full solution. More on the dielectrics practice page.
Next: magnetic fields: Biot-Savart and Ampère, then magnetic materials, which repeats this whole story for magnetism, with for and for . Back to conductors and images. For fields in matter at MSc level, see the GATE Physics course; CSIR NET adds dielectric and optical properties of solids.
Check yourself
Sources
- D. J. Griffiths, Introduction to Electrodynamics, 4th ed. (2017), chapter 4: electric fields in matter
- E. M. Purcell and D. J. Morin, Electricity and Magnetism, 3rd ed. (2013), chapters 3 and 10
- H. C. Verma, Concepts of Physics, Part 2 (1993), chapter 31
- IIT JAM Physics syllabus (Electricity and Magnetism section), published by the organising IIT each year
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Not affiliated with IIT or the JAM organising institute. Exam pattern as published for recent years: always check the official JAM website before the exam. All questions are original.