Home / Courses / IIT JAM Physics / Practice / Rotation, rolling and angular momentum

Rotation, rolling and angular momentum

Mechanics and properties of matter · 84 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Rotation, rolling and angular momentum.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    A skater spins on frictionless ice and pulls her arms in. Which quantity stays the same?
    1. Her angular speed
    2. Her rotational kinetic energy
    3. Her angular momentum about the spin axis
    4. Her moment of inertia
    Answer and solution

    Answer: C

    The ice exerts no torque about the vertical axis (no friction, and gravity and the normal force act along the axis). So L=Iω is constant. Pulling her arms in lowers I, so ω rises, and the energy L2/2I rises too.
  2. NATWarm-up

    A steady torque of 12 N m acts on a flywheel with moment of inertia 4 kg m² about its axle, starting from rest. Its angular speed after 5 s is ______ rad/s.
    Answer and solution

    Answer: 15 rad/s

    α=τ/I=12/4=3 rad/s². Then ω=αt=3×5=15 rad/s.
  3. MCQWarm-up

    A wheel of radius R rolls without slipping, turning at angular speed ω. The speed of its centre is
    1. ωR
    2. 2ωR
    3. ω/R
    4. ωR2
    Answer and solution

    Answer: A

    "Without slipping" means the contact point is momentarily at rest. Relative to the centre it moves backwards at ωR, so the centre must move forwards at ωR to cancel it.
  4. MCQWarm-up

    A bicycle wheel rolls without slipping; its centre moves at speed v. The speed of the topmost point of the tyre is
    1. v
    2. 2v
    3. zero
    4. 2v
    Answer and solution

    Answer: B

    Top point = centre velocity v forwards + rotation ωR=v forwards. Total 2v. The bottom point has v−v=0.
  5. NATWarm-up

    A disc with moment of inertia 0.5 kg m² spins at 20 rad/s about its axis. Its rotational kinetic energy is ______ J.
    Answer and solution

    Answer: 100 J

    K=12Iω2=12×0.5×400=100 J.
  6. MCQWarm-up

    Which unit is a correct unit of angular momentum?
    1. N m
    2. kg m/s
    3. N m/s
    4. J s
    Answer and solution

    Answer: D

    L=Iω has units kg m² × s⁻¹. A joule second is (kg m²/s²) × s = kg m²/s, the same. N m is the unit of torque (and energy); kg m/s is linear momentum.

    Why people get this wrong: Torque and energy share the unit N m; angular momentum is torque times time.

  7. MCQWarm-up

    A force F→=2iˆ N acts at the point r→=3jˆ m. Its torque about the origin is
    1. 6kˆ N m
    2. 6iˆ N m
    3. 0
    4. −6kˆ N m
    Answer and solution

    Answer: D

    τ→=r→×F→=3jˆ×2iˆ=6(jˆ×iˆ)=−6kˆ N m. The force pushes along +x at a point on the +y axis, turning things clockwise seen from +z: hence −kˆ.

    Why people get this wrong: The order matters: F→×r→ would give +6kˆ.

  8. NATStandard

    A dancer spins at 2 revolutions per second with moment of inertia 3.0 kg m². She draws in her arms, reducing it to 1.2 kg m². She now spins at ______ revolutions per second.
    Answer and solution

    Answer: 5 rev/s

    I1ω1=I2ω2: ω2=3.0×2/1.2=5 rev/s. Units of ω cancel, so revolutions per second can be used directly.
  9. MCQStandard

    When a spinning skater pulls in her arms (no external torque), what happens to her rotational kinetic energy?
    1. It stays the same, because angular momentum is conserved
    2. It increases; the extra comes from the work her muscles do pulling her arms in
    3. It decreases; energy is lost to friction in her joints
    4. It increases; the ice supplies the energy
    Answer and solution

    Answer: B

    K=L2/2I with L fixed, so a smaller I means a larger K. Her arms move inwards against the outward pull needed to keep them going round, so her muscles do positive work.

    Why people get this wrong: Conserving angular momentum does not mean conserving kinetic energy.

  10. NATStandard

    A 2 kg block hangs from a light string wound round a uniform disc pulley (mass 4 kg, radius 0.1 m) on a frictionless fixed axle. Released from rest, the block accelerates downwards at ______ m/s² (g=9.8 m/s², one decimal place).
    Answer and solution

    Answer: 4.9 m/s² (±0.05)

    Block: mg−T=ma. Pulley: TR=Iα=12MR2(a/R), so T=12Ma. Adding: mg=(m+12M)a, a=19.6/4=4.9 m/s². The radius cancels.

    Why people get this wrong: Treating the pulley as massless gives a=g.

  11. MCQStandard

    A uniform rod of length L is hinged at one end and held horizontal, then released. Its angular acceleration just after release is
    1. g/L
    2. 2g/3L
    3. 3g/2L
    4. 3g/L
    Answer and solution

    Answer: C

    Torque of gravity about the hinge: mg(L/2). Moment of inertia about an end: mL2/3. α=mgL/2mL2/3=3g2L.

    Why people get this wrong: Using mL2/12 (about the centre) instead of mL2/3 (about the hinge).

  12. NATStandard

    A uniform rod 1.47 m long, hinged at one end, is released from rest in a horizontal position. Its angular speed as it swings through the vertical is ______ rad/s (g=9.8 m/s², two decimal places).
    Answer and solution

    Answer: 4.47 rad/s (±0.02)

    The centre of mass falls L/2. Energy: mgL2=12⋅mL23ω2, so ω=3g/L=29.4/1.47=20≈4.47 rad/s.
  13. MSQStandard

    A ball rolls without slipping at constant velocity across a level rough floor, with no air resistance. Which statements are correct?
    1. The friction force on it is zero.
    2. Its kinetic energy is 12mv2(1+k2/R2), with k its radius of gyration.
    3. The point of the ball touching the floor is momentarily at rest.
    4. Friction does negative work on it and slowly stops it.
    Answer and solution

    Answer: A, B, C

    Nothing needs to change, so no horizontal force is needed: friction is zero (true). K=12mv2+12mk2ω2 with ω=v/R (true). Rolling without slipping means the contact point is at rest (true). Static friction on a point at rest does no work anyway; real balls stop because of rolling resistance (deformation), not because of this friction (false).
  14. MCQStandard

    A uniform solid sphere rolls without slipping. What fraction of its total kinetic energy is rotational?
    1. 2/7
    2. 2/5
    3. 5/7
    4. 1/2
    Answer and solution

    Answer: A

    Krot=12⋅25mR2ω2=15mv2 and Ktrans=12mv2. Fraction =1/51/2+1/5=27.

    Why people get this wrong: 2/5 is the ratio I/mR2, not the energy fraction.

  15. MCQStandard

    A 20 N force is applied to the end of a 0.5 m spanner, at 30∘ to the spanner's length. The torque about the bolt is
    1. 10 N m
    2. 5 N m
    3. 8.66 N m
    4. 2.5 N m
    Answer and solution

    Answer: B

    τ=rFsin⁡θ where θ is the angle between r→ (along the spanner) and F→: 0.5×20×sin⁡30∘=5 N m.

    Why people get this wrong: Using cos⁡30∘ gives 8.66 N m; the angle is measured from the spanner, so the perpendicular part is Fsin⁡θ.

  16. MCQStandard

    A particle moves at constant velocity along a straight line that misses the origin O by a distance d. Its angular momentum about O
    1. is zero
    2. increases linearly with time
    3. decreases with time
    4. is constant
    Answer and solution

    Answer: D

    |L→|=m|r→×v→|=mvd, since the perpendicular distance from O to the line of motion is always d, and its direction is fixed. No force means no torque, so this had to be true.
  17. NATStandard

    A disc (moment of inertia 2 kg m²) spins at 10 rad/s on a frictionless axle. A second disc (3 kg m²), at rest, is dropped onto it on the same axle and they turn together. Their common angular speed is ______ rad/s.
    Answer and solution

    Answer: 4 rad/s

    Angular momentum about the axle is kept: 2×10=(2+3)ω, so ω=4 rad/s.
  18. MSQStandard

    Which statements about torque are correct?
    1. Torque about a point O is r→×F→, with r→ from O to where the force acts.
    2. A force whose line of action passes through an axis has no torque about that axis.
    3. The torque of a single force depends on the point about which it is taken.
    4. The torque of a couple (two equal and opposite forces not in line) depends on the point about which it is taken.
    Answer and solution

    Answer: A, B, C

    First and second: the definition, and a zero lever arm. Third: moving O changes r→ and so r→×F→. Fourth is false: for a couple, (r→1−r→2)×F→ involves only the separation of the two forces, so it is the same about every point.
  19. NATStandard

    A flywheel of moment of inertia 5.0 kg m² turns at 300 rev/min. A brake with a steady torque stops it in 20 revolutions. The braking torque is ______ N m (two decimal places).
    Answer and solution

    Answer: 19.63 N m (±0.05)

    ω=300×2π/60=10π=31.42 rad/s, so the kinetic energy is 12×5×(31.42)2=2467 J. Work–energy for rotation: τθ=12Iω2 with θ=20×2π=125.7 rad. τ=2467/125.7=19.63 N m.

    Why people get this wrong: The angle must be in radians: using 20 (revolutions) for θ gives a torque 2π times too big.

  20. MCQStandard

    A uniform solid sphere and a thin hollow sphere of the same mass and radius roll without slipping at the same speed. Which has more kinetic energy?
    1. the hollow sphere
    2. the solid sphere
    3. both the same, as mass and speed are the same
    4. it depends on the radius
    Answer and solution

    Answer: A

    Rolling: K=12Mv2(1+IMR2). Solid: 1+25=1.4. Hollow: 1+23=1.67. The hollow sphere's mass sits farther out, so it has more rotational energy at the same speed (by a factor 1.67/1.4=1.19 overall).

    Why people get this wrong: Equal mass and speed give equal translational energy only; the rotational parts differ.

  21. NATExam level

    A turntable (1.5 kg m²) spins freely at 12 rad/s. A ring (0.5 kg m² about the same axis), initially not rotating, is placed on it and soon turns with it. The kinetic energy lost is ______ J.
    Answer and solution

    Answer: 27 J (±0.1)

    Common speed: 1.5×12=2ω, ω=9 rad/s. Before: 12×1.5×144=108 J. After: 12×2×81=81 J. Lost: 27 J, turned to heat by friction between the two while they slipped.

    Why people get this wrong: This is the rotational version of a perfectly inelastic collision: angular momentum kept, energy not.

  22. NATExam level

    A uniform solid sphere rolls without slipping, from rest, down a ramp through a vertical drop of 1.4 m. Its speed at the bottom is ______ m/s (g=9.8 m/s², two decimal places).
    Answer and solution

    Answer: 4.43 m/s (±0.02)

    mgh=12mv2(1+25)=710mv2, so v=10gh/7=19.6≈4.43 m/s. Static friction does no work, so energy is conserved.

    Why people get this wrong: 2gh=5.24 m/s is the speed of something sliding without friction.

  23. MCQExam level

    A uniform solid cylinder is to roll without slipping down an incline of angle θ. The coefficient of static friction must be at least
    1. 13tan⁡θ
    2. tan⁡θ
    3. 27tan⁡θ
    4. 12tan⁡θ
    Answer and solution

    Answer: A

    Along the slope: mgsin⁡θ−f=ma. About the centre: fR=12mR2(a/R), so f=12ma. Then a=23gsin⁡θ and f=13mgsin⁡θ. Need f≤μmgcos⁡θ: μ≥13tan⁡θ.

    Why people get this wrong: 27tan⁡θ is the answer for a solid sphere.

  24. MCQExam level

    A uniform solid ball is launched along a level rough floor sliding at speed v0 with no spin. Once it rolls without slipping, its speed is
    1. v0
    2. 2v0/5
    3. 7v0/5
    4. 5v0/7
    Answer and solution

    Answer: D

    Friction acts at the contact point, so the angular momentum about any fixed point on the floor is kept (gravity and the normal force cancel). Before: mv0R. After: mvR+25mR2(v/R)=75mvR. So v=5v0/7.

    Why people get this wrong: Energy is not conserved while the ball skids, so energy methods give the wrong answer.

  25. NATExam level

    A bowling ball (uniform solid sphere) is released sliding at 7 m/s with no spin. The coefficient of kinetic friction with the lane is 0.2. It starts pure rolling after ______ s (g=9.8 m/s², two decimal places).
    Answer and solution

    Answer: 1.02 s (±0.01)

    Friction μmg slows the centre: v=v0−μgt. Its torque spins the ball up: α=μmgR/(25mR2)=5μg2R, so ωR=52μgt. Rolling starts when v=ωR: v0=72μgt, t=2v07μg=1413.72≈1.02 s.
  26. MSQExam level

    A fast-spinning top (spin angular momentum Iω, mass m, centre of mass a distance r from the tip) precesses slowly under gravity. In the usual fast-top approximation, which statements are correct?
    1. The precession rate rises as the spin slows down.
    2. The precession rate does not depend on the tilt angle.
    3. Gravity's torque changes the direction of the angular momentum, not its size.
    4. Doubling the spin doubles the precession rate.
    Answer and solution

    Answer: A, B, C

    The torque mgrsin⁡θ is horizontal and perpendicular to L→, so it only swings L→ round (third true). The horizontal part of L→ is Iωsin⁡θ and turns at rate Ω: ΩIωsin⁡θ=mgrsin⁡θ, so Ω=mgr/(Iω). The tilt cancels (second true); Ω∝1/ω, so a slower spin precesses faster (first true, fourth false).
  27. NATExam level

    A gyroscope wheel (mass 0.5 kg, moment of inertia 0.02 kg m² about its spin axis) spins at 100 rad/s. Its axle rests on a pivot with the wheel's centre 0.1 m from it. The precession rate is ______ rad/s (g=9.8 m/s², three decimal places).
    Answer and solution

    Answer: 0.245 rad/s (±0.002)

    Ω=mgrIω=0.5×9.8×0.10.02×100=0.492=0.245 rad/s.
  28. MCQExam level

    A uniform rod of length L stands upright on a hinge at its lower end and topples over. The speed of its top end just as it reaches the ground is
    1. gL
    2. 2gL
    3. 6gL
    4. 3gL
    Answer and solution

    Answer: D

    The centre falls L/2: mgL/2=12(mL2/3)ω2, so ω2=3g/L. The top end moves at ωL=3gL, faster than a stone dropped from height L (2gL).

    Why people get this wrong: The tip of a falling rod moves faster than free fall from the same height.

  29. NATExam level

    A uniform rod (mass 3 kg, length 1 m) hangs from a frictionless pivot at its top end. A 10 g bullet moving horizontally at 300 m/s hits the bottom end and stays in it. The rod's angular speed just after impact is ______ rad/s (two decimal places).
    Answer and solution

    Answer: 2.97 rad/s (±0.01)

    The pivot can push during the impact, so linear momentum is not kept, but its force has no torque about the pivot: angular momentum about the pivot is kept. Before: mvL=0.01×300×1=3 kg m²/s. After: (ML2/3+mL2)ω=(1+0.01)ω. So ω=3/1.01≈2.97 rad/s.

    Why people get this wrong: Using linear momentum ignores the impulse from the pivot.

  30. MCQExam level

    A uniform rod of mass m lies at rest on frictionless ice. A sharp impulse J is given to one end, perpendicular to the rod. Immediately afterwards the other end moves
    1. forwards at J/m
    2. not at all
    3. backwards at 2J/m
    4. forwards at 4J/m
    Answer and solution

    Answer: C

    Centre: v=J/m forwards. Spin: JL2=mL212ω, so ω=6J/(mL). The far end moves at v−ωL/2=J/m−3J/m=−2J/m: backwards at 2J/m. (The point that stays still is L/6 from the centre, towards the far end.)

← All topics · Timed mock test →