Module 6: Modern physics · Lesson 6.6 · about 45 min
Nuclear reactions, fission and fusion
How to balance a nuclear reaction, work out its Q-value from masses or binding energies, find the threshold of an endothermic reaction, use cross-sections and mean free paths, and understand fission chain reactions, moderators and delayed neutrons, and fusion in the Sun and in reactors, with the traps JAM sets.
Module 6 · about 45 minutes. By the end you will be able to balance any reaction, compute its Q-value from atomic masses or binding energies, find the threshold energy of an endothermic reaction, share energy between products with momentum conservation, use cross-sections for attenuation and reaction rates, explain chain reactions, moderators and delayed neutrons, and estimate the energy from fission and fusion fuel.
1. What you already know, and what is new
In lesson 6.5 nuclei changed on their own: alpha, beta and gamma decay. Now we hit them with something (a proton, neutron, deuteron, alpha particle or photon) and look at what comes out. The notation is shortened to . For example, Rutherford’s first transmutation (1919) was
What is conserved: charge ( adds up), nucleon number ( adds up), total energy, momentum, angular momentum and parity. What is not: the sum of the rest masses. The change in rest mass is exactly the energy released or absorbed.
2. The Q-value
: exothermic, kinetic energy is released. : endothermic, the projectile must bring energy.
Use atomic masses from the tables: when balances, the electrons on the two sides balance too and cancel. (In beta-plus processes, where the electron count does not balance, take care: see the pp chain below.) Equivalently, in terms of binding energies, : energy comes out when the products are more tightly bound.
- Q
- energy released by the reaction: lost rest mass × c², equal to the gain in kinetic energy
- 931.5 MeV
- the rest energy of one atomic mass unit
- Q from B
- gain in total binding energy (products minus reactants): the opposite order to the mass formula
- Threshold
- smallest projectile kinetic energy that makes an endothermic reaction go; always more than |Q|
- Physical meaning
- Nuclear energy is stored as rest mass. Moving nucleons into more tightly bound nuclei releases about 1 MeV per nucleon, against a few eV per atom in chemistry.
Worked example (D–T fusion). Atomic masses: ²H 2.014102 u, ³H 3.016049 u, ⁴He 4.002603 u, n 1.008665 u. Before: 5.030151 u. After: 5.011268 u. MeV.
Worked example (Rutherford’s reaction). ⁴He + ¹⁴N = 18.005677 u; ¹⁷O + ¹H = 18.006957 u. The products are heavier, so MeV: endothermic.
3. Kinematics: sharing energy and thresholds
Two products from rest. If the reactants have negligible momentum (a slow neutron, or a nucleus that splits on its own), the two products fly apart with equal and opposite momenta . Since , the lighter one takes the larger share:
In D–T fusion the neutron (mass 1) gets MeV and the alpha particle (mass 4) gets 3.5 MeV.
Threshold of an endothermic reaction. A projectile hitting a stationary target cannot spend all its kinetic energy on the reaction: momentum must be conserved, so the products keep moving with the centre-of-mass velocity. At threshold the products are at rest in the centre-of-mass frame, and (non-relativistically)
For Rutherford’s reaction: MeV. For ⁷Li(p, n)⁷Be, MeV and MeV. When the target is much heavier than the projectile the threshold is close to .
Lab frame. Projectile a (mass ma, kinetic energy K) hits X at rest. Total momentum pa = √(2maK).
Centre of mass. It moves at V = pa/(ma + mX) and carries kinetic energy pa²/2(ma + mX) = K ma/(ma + mX), which can never be used.
What is left. The energy available for the reaction is K − K ma/(ma + mX) = K mX/(ma + mX).
Threshold. Set it equal to −Q: Kth = −Q (ma + mX)/mX = −Q(1 + ma/mX).
The Q-equation. When the outgoing particle is measured at angle to the beam, momentum and energy conservation give
At the last term vanishes, which is why JAM questions like that angle. This is how Q-values (and so masses of unstable nuclei) are measured.
For relativistic thresholds use the invariant mass: in the lab must reach . For antiproton production, , this gives GeV (see special relativity).
4. Cross-sections: how likely is a reaction?
Each target nucleus presents an effective area to the beam, its cross-section, measured in barns: b m². With nuclei per unit volume:
- a beam falls off as ;
- the mean free path is ;
- a thin target of nuclei in a flux (particles per m² per s) reacts at the rate .
Worked example. A slab with m⁻³ and b has m⁻¹: mean free path 10 cm, and a 5 cm slab lets through of the beam.
Slow projectiles that are captured make a compound nucleus that lives long enough to share the energy among all its nucleons and “forget” how it was formed (Bohr’s independence hypothesis); its decay depends only on energy and angular momentum. Fast projectiles can instead knock out or pick up a single nucleon in a direct reaction, over in the time it takes to cross the nucleus.
5. Fission and chain reactions
A uranium-235 nucleus that captures a slow neutron becomes uranium-236, which wobbles and splits into two medium-mass fragments plus 2 or 3 neutrons, for example
Why energy comes out. Binding energy per nucleon is about 7.6 MeV for uranium and about 8.5 MeV for the fragments, so roughly MeV is released per fission: about 170 MeV as kinetic energy of the fragments (shared inversely to their masses), the rest in neutrons, gamma rays and the later beta decays. That is J per kilogram, millions of times more than burning coal. The interactive binding energy curve shows where the energy comes from.
Worked example (fuel use). A 1000 MW (thermal) reactor makes fissions per second, per day: 4.5 mol, or about 1.05 kg of uranium-235 a day.
Chain reactions. The multiplication factor is the number of neutrons in one generation for each neutron in the generation before (after leakage and absorption). : subcritical, the reaction dies out. : critical, steady power. : supercritical, the power grows as after generations. Leakage happens through the surface while production happens in the volume, so a small lump leaks too much: hence a critical mass.
What makes a reactor controllable:
- A moderator (water, heavy water, graphite) slows the 2 MeV fission neutrons to thermal energies (0.025 eV), where uranium-235’s fission cross-section is about 580 b. In a head-on elastic collision a neutron keeps the fraction of its energy: nothing after hitting hydrogen, 72% after carbon. Light nuclei that absorb few neutrons make the best moderators.
- Control rods (boron, cadmium) absorb neutrons to adjust .
- About 0.65% of the neutrons are delayed, emitted seconds later by fission products. They stretch the effective generation time from about s to about 0.1 s. A reactor is run so that it can only exceed with the help of the delayed neutrons, giving the control system minutes, not milliseconds.
Worked example. With and a generation time of 0.1 s, the power doubles after generations, or 69 s. Try it in the figure, and play with the fission chain reaction simulator.
6. Fusion
Light nuclei release energy by fusing, because binding energy per nucleon climbs steeply from hydrogen to helium-4. The main reactions:
| Reaction | Q (MeV) | Where |
|---|---|---|
| ²H + ³H → ⁴He + n | 17.6 | fusion reactors |
| ²H + ²H → ³He + n | 3.27 | reactors, early universe |
| ²H + ²H → ³H + p | 4.03 | reactors |
| 4 ¹H → ⁴He + 2e⁺ + 2ν (pp chain) | 26.7 | the Sun |
The Coulomb barrier. Two deuterons must come within about 3 fm to feel the strong force. The electric repulsion there is MeV. The centre of the Sun is at K, where keV, hundreds of times lower. Fusion happens only because the fastest nuclei in the Maxwell distribution tunnel through the barrier, which is why it is slow and the Sun lasts ten billion years.
The pp chain and atomic masses. u gives 26.7 MeV. Using atomic masses here automatically includes the energy of the two positrons annihilating with two electrons ( MeV); the purely nuclear step releases 24.7 MeV.
Fusion on Earth needs a D–T plasma at about K, held together long enough: the Lawson criterion asks for density × energy-confinement time above about s m⁻³. Per kilogram, D–T fuel gives MeV per u, about four times fission’s MeV per u. Tritium is rare, so it is bred from lithium: ⁶Li + n → ³H + ⁴He (Q = 4.78 MeV).
“Mass is converted into energy only in nuclear reactions.” Every exothermic reaction, including burning wood, loses a little rest mass; in chemistry it is about a billionth of the mass, too small to weigh, while in nuclear reactions it is about a thousandth.
“The threshold of an endothermic reaction is |Q|.” Only if the target were infinitely heavy. Momentum must be conserved, so the products keep the centre-of-mass motion: .
“Equal momenta means equal energies.” In a two-body break-up the momenta are equal, so the lighter product carries more energy: 14.1 of the 17.6 MeV goes to the neutron in D–T fusion.
- Conserved: , , energy, momentum, angular momentum, parity. Not conserved: total rest mass.
- MeV/u (atomic masses), or .
- Two products from rest: . Threshold: ; at the Q-equation loses its cross term.
- , , ; 1 b m².
- Fission: about 200 MeV per uranium-235 fission, J/kg; about 1.05 kg/day per 1000 MW thermal. critical; moderators slow neutrons, control rods absorb them, delayed neutrons make control possible.
- Head-on elastic collision: energy kept .
- Fusion: D–T 17.6 MeV (neutron gets 14.1); pp chain 26.7 MeV with atomic masses; Coulomb barrier about 0.5 MeV crossed by tunnelling; Lawson s m⁻³.
Practise: exam questions on this lesson
They start easy and climb to top-rank level. Check each answer, then read the full solution. More on the nuclear reactions practice page.
Before this: lesson 6.5, nuclei and radioactivity. Next: module 7, starting with crystal structure. Going on to GATE or CSIR NET? The GATE Physics course adds nuclear models, the nuclear force and elementary particles, and CSIR NET covers the deuteron and the nuclear force.
Check yourself
Sources
- K. S. Krane, Introductory Nuclear Physics (Wiley, 1988), chapters 11 to 14
- A. Beiser, Concepts of Modern Physics, 6th ed. (McGraw-Hill, 2003), chapter 12
- J. R. Lamarsh and A. J. Baratta, Introduction to Nuclear Engineering, 3rd ed. (Prentice Hall, 2001), chapters 3 and 4
- IIT JAM Physics syllabus (Modern Physics section), published by the organising IIT each year
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Not affiliated with IIT or the JAM organising institute. Exam pattern as published for recent years: always check the official JAM website before the exam. All questions are original.