Home / Learn / Exam prep / IIT JAM Physics / Lesson 3.6
All lessons

Module 3: Oscillations, waves and optics · Lesson 3.6 · about 55 min

Geometrical optics: mirrors, lenses and systems

Fermat's principle, reflection, refraction and total internal reflection, apparent depth, prisms and dispersion, spherical mirrors, refraction at a curved surface, thin lenses and the lensmaker's formula, lens combinations, instruments, aberrations, thick lenses and ray matrices, with one sign convention throughout.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Module 3 · about 55 minutes. By the end you will be able to derive the laws of reflection and refraction from one principle, handle total internal reflection, slabs and prisms, find the image formed by any mirror, curved surface, lens or system of lenses with one sign convention, design an achromatic doublet, and use cardinal points and ray matrices for thick systems.

When the wavelength is tiny compared with everything it meets, light travels in straight rays that bend only where the refractive index changes. Every rule in this lesson, from Snell's law to the lens formula, follows from one idea: light takes the path of stationary travel time.

1. Fermat’s principle

Light travels between two points along a path for which the optical path ∫nds (and so the travel time) is stationary: usually a minimum. Two laws follow at once:

  • Reflection: the angle of reflection equals the angle of incidence (the shortest route via a mirror).
  • Refraction (Snell’s law): n1sin⁡θ1=n2sin⁡θ2. Light trades a longer path in the fast medium for a shorter one in the slow medium, like a lifeguard running along the beach before swimming.

A mirage is Fermat at work: near a hot road the air has a lower index, so grazing rays bend away from it and curve back up. Turning a mirror by θ turns the reflected ray by 2θ. The Snell’s law tool shows the bending live.

2. Total internal reflection, slabs and apparent depth

Going from a higher index n1 to a lower one n2, the refracted ray reaches 90∘ at the critical angle, sin⁡C=n2/n1; beyond it all the light reflects. Glass in air: 41.8∘; water: 48.6∘; diamond (n=2.42): 24.4∘, which traps light and makes it sparkle. Optical fibres guide light this way (Optical fibre).

Seen straight down, an object at depth d in a medium of index n appears at d/n; for several layers add ti/ni. A slab of thickness t raises an object behind it by t(1−1/n).

Worked example. A coin under 4 cm of water (n=4/3) on top of 6 cm of glass (n=1.5) appears 4/(4/3)+6/1.5=3+4=7 cm below the surface, instead of 10 cm.

3. Prisms and dispersion

A prism of apex angle A deviates a ray least when the ray passes through symmetrically. Then

n=sin⁡[(A+Dm)/2]sin⁡(A/2),δ≈(n−1)A (thin prism)

Worked example. A=60∘, Dm=40∘: n=sin⁡50∘/sin⁡30∘=1.532. With n=2: sin⁡[(60∘+D)/2]=0.707, so D=30∘.

Because n depends on wavelength, the prism spreads colours by (nv−nr)A. The dispersive power is ω=(nv−nr)/(n−1). Two thin prisms of different glass, apex opposite, cancel the spread (no dispersion, some deviation) if (nv−nr)A=(nv′−nr′)A′, or cancel the deviation (a direct-vision prism) if (n−1)A=(n′−1)A′. Rainbows are prisms made of drops: about 42∘ from the antisolar point, red outside; the secondary bow has two internal reflections and reversed colours. See Prism and dispersion.

4. One sign convention for everything

Mixed-up signs cause more lost marks in optics than anything else, so this course uses one rule (the Cartesian convention): light travels left to right; measure every distance from the mirror, surface or lens; distances in the direction of the light are positive, against it negative; heights above the axis are positive. A real object is at negative u.

Mirror: 1v+1u=1f, f=R2, m=−vuLens: 1v−1u=1f, m=vu

In this convention a concave mirror has negative f, a convex lens positive f.

u
object distance from the mirror or lens (negative for a real object in front)
v
image distance: for a lens, positive means a real image behind it; for a mirror, negative means a real image in front
f
focal length: positive for converging lenses, negative for diverging lenses; negative for concave mirrors
m
lateral magnification: negative means inverted
Physical meaning
Lenses and mirrors map each object point to one image point. The formulas just say where; the signs say on which side and which way up.

Worked example (mirror). Object 10 cm in front of a concave mirror of radius 30 cm: f=−15, u=−10. 1/v=−1/15+1/10=1/30, v=+30 cm: virtual, behind the mirror, m=−v/u=3, upright and magnified: a shaving mirror.

Worked example (lens). Object 30 cm in front of a convex lens of 20 cm: 1/v=1/20−1/30=1/60, v=60 cm, m=60/(−30)=−2: real, inverted, twice the size.

Three rays from the tip of the object: parallel to the axis, through the centre and through the front focal point. Move the object across the focal point and watch the image jump from real to virtual. Switch to two lenses and set f₁ + f₂ = d to make a telescope.

5. Refraction at a curved surface and the lensmaker’s formula

At a single spherical surface of radius R between indices n1 (light comes from here) and n2:

n2v−n1u=n2−n1R

Apply it twice (two surfaces, thin glass) and you get the lensmaker’s formula, with n the index of the lens relative to its surroundings:

1f=(nlensnmedium−1)(1R1−1R2)

Worked example. An equiconvex lens, R=20 cm, n=1.5: 1/f=0.5(1/20+1/20), f=20 cm. In water the bracket factor becomes 1.5/1.333−1=0.125, so f=80 cm. Cut it across the axis into two plano-convex halves and each has f=40 cm.

Worked example (two surfaces, done carefully). A glass sphere (n=1.5, R=10 cm) in a parallel beam: the first surface alone would focus at 30 cm, which is 10 cm beyond the back surface; the second surface (glass to air, R=−10, u=+10) gives 1/v=0.05+0.15, v=5 cm beyond the sphere.

6. Lens combinations and instruments

Thin lenses in contact add powers: P=P1+P2. Separated by d:

1F=1f1+1f2−df1f2

Worked example. Two 20 cm lenses 10 cm apart: 1/F=3/40, F=13.3 cm, measured from the principal planes (section 8). A +30 cm lens 20 cm in front of a −10 cm lens: 1/F=1/30−1/10+20/300=0, an afocal system: a Galilean telescope with magnification 3.

For a real object between two lenses, find the first image, then use it as the object of the second lens (it may be virtual, with positive u). Magnifications multiply.

Instrument Angular magnification
magnifier (image at near point D=25 cm / at infinity) 1+D/f / D/f
compound microscope mo×D/fe
astronomical telescope, normal adjustment fo/fe, length fo+fe, inverted
Galilean telescope fo/|fe|, length fo−|fe|, upright

Worked example. A microscope with fo=1 cm, fe=5 cm, lenses 20 cm apart, final image at infinity: the objective must put its image at the eyepiece focus, vo=15 cm, so uo=−15/14 cm and mo=−14; total 14×5=70. The Microscope and telescope tool lets you try other designs.

Displacement method. With object and screen a fixed D apart, a convex lens gives two sharp images (if D>4f) at positions x apart, and f=(D2−x2)/(4D); the object height is h1h2.

7. Aberrations

Chromatic aberration: a lens is a weak prism, so violet focuses closer than red. Two lenses in contact are achromatic if ω1/f1+ω2/f2=0.

Worked example. A +40 cm doublet from crown (ω=0.02) and flint (ω=0.04): f2=−2f1 and 1/f1+1/f2=1/(2f1)=1/40, so a +20 cm crown lens and a −40 cm flint lens. The less dispersive glass must be the converging lens.

Spherical aberration: edge rays focus closer than central ones. A plano-convex lens does best with its curved side towards the parallel light, so both surfaces share the bending.

“The image is always where the lens formula says, so signs do not matter if I take magnitudes.” Magnitudes hide the physics. |v| alone cannot tell a real image you can catch on a screen from a virtual one you can only look at, and in a two-lens problem the sign of the first image decides whether the second lens sees a real or a virtual object, which changes the final answer completely. Pick one convention, write the sign of every distance before you substitute, and read the sign of the answer.

8. Thick lenses, cardinal points and ray matrices

A thick lens or a system of lenses behaves like a thin lens if you measure from two principal planes instead of from the lens. Together with the two focal points and the two nodal points (the same as the principal points when the medium is the same on both sides) these are the six cardinal points. For a thick lens of thickness d:

1f=(n−1)[1R1−1R2+(n−1)dnR1R2]

An equiconvex lens with R=20 cm, d=3 cm, n=1.5 has f=20.5 cm instead of 20 cm.

Ray matrices (GATE and NET) write a ray as (height, angle) and each element as a 2×2 matrix: a gap d is (1d01), a thin lens (10−1/f1). Multiply them right to left. The system’s power is −C; between equal media the determinant is 1; if B=0 the planes are object and image, with magnification A. The Lens ray tracer handles multi-element systems.

  • Fermat: optical path stationary. Snell n1sin⁡θ1=n2sin⁡θ2; critical angle sin⁡C=n2/n1; apparent depth d/n; slab shift t(1−1/n).
  • Prism: n=sin⁡[(A+Dm)/2]/sin⁡(A/2); thin prism (n−1)A; dispersive power (nv−nr)/(n−1).
  • Cartesian convention: mirror 1/v+1/u=1/f, m=−v/u; lens 1/v−1/u=1/f, m=v/u; surface n2/v−n1/u=(n2−n1)/R.
  • Lensmaker uses the relative index; in water a glass lens weakens about four times.
  • Separated lenses 1/F=1/f1+1/f2−d/f1f2; F=∞ when d=f1+f2 (telescope).
  • Achromat ω1/f1+ω2/f2=0. Thick systems: measure from principal planes; ray matrices multiply.

Practise: exam questions on this lesson

They start easy and climb to top-rank level. More on the geometrical optics practice page.

Next: rays are the short-wavelength limit of waves. Lesson 3.7 brings the wave nature back with interference, then diffraction and polarisation. For drawing ray diagrams by hand first, try the Lens ray diagram and Mirror ray diagram tools.

Go deeper: GATE Physics derives the laws of reflection and refraction, and how much light each surface reflects, from Maxwell’s equations in the Fresnel equations.

Check yourself

1A glass lens (n = 1.5) has focal length 20 cm in air. What is it in water (n = 4/3)?
2Two thin lenses of focal lengths 20 cm and 20 cm are 10 cm apart. What is the equivalent focal length?
3Why does a thin layer of hot air above a road look like water?

Sources

  • E. Hecht, Optics, 5th ed. (2017), chapters 4 to 6
  • F. A. Jenkins and H. E. White, Fundamentals of Optics, 4th ed. (1976), chapters 1 to 10
  • A. Ghatak, Optics, 7th ed. (2020), chapters 2 to 5
  • IIT JAM Physics syllabus (Oscillations, Waves and Optics section), published by the organising IIT each year

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Not affiliated with IIT or the JAM organising institute. Exam pattern as published for recent years: always check the official JAM website before the exam. All questions are original.