Module 5: Kinetic theory and thermodynamics · Lesson 5.6 · about 45 min
Blackbody radiation: Planck, Wien and Stefan-Boltzmann
Cavity radiation from Kirchhoff to Planck: counting modes, the Rayleigh–Jeans law and its ultraviolet catastrophe, Planck's law and its limits, Wien's displacement law (per wavelength and per frequency), the Stefan–Boltzmann law, energy density, radiation pressure and the photon gas, with stars, planets and the cosmic background as worked examples.
Module 5 · about 45 minutes. By the end you will be able to explain what a blackbody is and why its spectrum is universal, count the modes of a cavity, derive the Rayleigh–Jeans law and see why it fails, use Planck’s law and its two limits, apply Wien’s and Stefan’s laws to stars, planets and furnaces without the usual slips, and treat blackbody radiation as a gas with energy density, pressure and entropy.
1. What a blackbody is, and why it is universal
Every object glows: its charges jiggle with the thermal motion and radiate. A blackbody absorbs every bit of radiation that falls on it, at every wavelength. The best real example is a small hole in the wall of a closed oven: light that enters bounces around inside and is almost never reflected back out. The light coming out of the hole is the radiation in equilibrium with the walls.
Kirchhoff’s law says that in thermal equilibrium a body’s emissivity equals its absorptivity at each wavelength, . If a body absorbed more than it emitted at some wavelength, two bodies at the same temperature could exchange heat on their own, breaking the second law. Two consequences:
- good absorbers are good emitters (a blackbody is the best emitter at every wavelength; polished silver is a poor one, which is why vacuum flasks are silvered);
- the radiation in a cavity cannot depend on the wall material, only on . So its spectrum is a universal function, and finding it was one of the big problems of 1900.
For the astronomer’s side of the story (star colours, the H-R diagram and spectra of real stars) see the astronomy course lesson on blackbody radiation and star colour. Here we do the physics that JAM asks about.
2. Counting modes and the Rayleigh–Jeans law
Inside a cubical cavity of side , the field must form standing waves. Allowed wave vectors are with positive integers. Each allowed occupies a volume of -space. Counting the points in one octant of a shell of radius and thickness , and doubling for the two polarisations of light:
using . The number of modes per unit frequency grows as : there are many more ways to fit short waves into a box.
Classical physics gives each mode (a harmonic oscillator) an average energy (equipartition: each for its electric and magnetic energy). Multiply:
This is the Rayleigh–Jeans law. It fits measured spectra well at long wavelengths, but it keeps growing as , so the total energy is infinite. Ehrenfest called this the ultraviolet catastrophe. A real oven does not hold infinite energy, so something in the classical picture must be wrong.
3. Planck’s law
Planck (1900) found the formula that fits, and then the assumption behind it: a mode of frequency can hold energy only in whole lumps, . With Boltzmann weights , the average energy of the mode is
For low frequencies () this is , as classically. For high frequencies the mode would need a lump much bigger than and is almost never excited: the catastrophe disappears. Multiplying by the mode density:
Per unit wavelength (use with ):
- 8πν²/c³
- number of standing-wave modes per unit volume per unit frequency, including two polarisations
- hν/(e^(hν/kT) − 1)
- average energy per mode when energy comes in lumps hν (Planck); tends to kT when hν ≪ kT
- u(ν, T)
- energy per unit volume per unit frequency inside the cavity
- Limits
- hν ≪ kT: Rayleigh–Jeans, 8πν²kT/c³ (no h). hν ≫ kT: Wien's tail, (8πhν³/c³)e^(−hν/kT)
- Physical meaning
- Short-wavelength modes are frozen out because the thermal energy kT cannot pay for even one quantum. Quantum theory began here.
Worked example. For a mode with , Planck gives , already well below the classical . At it is .
4. Wien’s displacement law
Set . With this gives , whose root is . So
Worked examples. The Sun (5800 K) peaks at nm, in the green. You (310 K) peak at 9.3 μm, which is why thermal cameras look at 8 to 14 μm. The cosmic microwave background (2.725 K) peaks at 1.06 mm. A star peaking at 290 nm is at about 10 000 K.
Maximising instead gives . The two peaks do not correspond: . For the Sun, Hz, a wavelength of 880 nm, not 500 nm. Where a curve peaks depends on whether you count energy per nanometre or per hertz; only the total is the same.
5. Stefan–Boltzmann: total energy and power
Integrate Planck’s law over all frequencies, using :
The power per unit area leaving a blackbody surface (or a hole in a cavity) is of times the energy density, the same that gives the effusion rate of a gas:
A real body with emissivity emits . A body at in surroundings at loses net power ; for small differences that is , Newton’s law of cooling.
Worked example (the Sun’s temperature from the solar constant). Sunlight brings W/m² at m. The Sun’s power spreads over , so and
Worked example (a planet’s temperature). A fast-rotating black planet absorbs on its disc and radiates from its whole surface : , so K at the Earth’s distance. With 30% of the light reflected (albedo 0.3), multiply by : 255 K. The real average, 288 K, is 33 K warmer because of the greenhouse effect. Mind the geometry: a flat plate facing the Sun and radiating from one face reaches 394 K.
6. Radiation as a gas: pressure, photons and entropy
A photon has momentum . Averaging over all directions (as in kinetic theory) gives the pressure of isotropic radiation:
(A parallel beam of intensity pushes with on an absorber and on a mirror, as in the photons lesson.)
Thermodynamics then gives the rest. With and :
- entropy ; in a reversible adiabatic change and stay constant ();
- photon number density m⁻³ and mean photon energy ;
- in an isothermal expansion the walls create new photons ( is fixed by ); in an adiabatic one the photon number stays fixed.
Worked example (the cosmic background). As the universe expands, the background radiation expands adiabatically, so . Released when the universe was 1100 times smaller and about 3000 K, it is now 2.725 K, with about 411 photons in every cubic centimetre. The cosmology course tells that story.
Worked example (radiation pressure in stars). Radiation pressure equals the gas pressure when . For m⁻³ that is K. Radiation pressure grows as and gas pressure as , so it dominates in the hottest, most massive stars.
“The Sun’s spectrum peaks at 500 nm, so its photons are most common at 500 nm.” The peak depends on how you plot. Per unit frequency it peaks near 880 nm; counted as photons per unit wavelength it peaks elsewhere again. Use mm K only for the per-wavelength curve.
“A white surface is a poor emitter.” Only in visible light. Snow and white paint absorb strongly near 10 μm, so they radiate almost like blackbodies at room temperature. Emissivity depends on wavelength, and Kirchhoff’s law holds wavelength by wavelength.
To put real numbers in (any temperature, any band, luminosity from radius), use fibub’s blackbody calculator.
- Kirchhoff: in equilibrium; cavity radiation depends on only.
- Modes: per unit volume per unit frequency. Rayleigh–Jeans fails at high (ultraviolet catastrophe).
- Planck: ; mean energy per mode .
- Wien: m K (from ); per frequency ; the peaks do not correspond.
- , , W m⁻² K⁻⁴; net loss .
- Radiation pressure (isotropic); or for a beam. Adiabatic: constant, . , mean photon energy .
- Planet: ; star: .
Practise: exam questions on this lesson
They start easy and climb to top-rank level. Check each answer, then read the full solution. More on the blackbody radiation practice page.
Before this: lesson 5.5, phase changes. Next: module 6 begins with photons, where Einstein takes Planck’s lumps literally. Going on to GATE or CSIR NET? The GATE Physics course derives Planck’s law again from Bose–Einstein statistics.
Check yourself
Sources
- R. Eisberg and R. Resnick, Quantum Physics of Atoms, Molecules, Solids, Nuclei and Particles, 2nd ed. (Wiley, 1985), chapter 1
- F. Reif, Fundamentals of Statistical and Thermal Physics (McGraw-Hill, 1965; reissued 2009), section 9.13
- S. J. Blundell and K. M. Blundell, Concepts in Thermal Physics, 2nd ed. (Oxford, 2010), chapter 23
- IIT JAM Physics syllabus (Kinetic theory and thermodynamics section), published by the organising IIT each year
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Not affiliated with IIT or the JAM organising institute. Exam pattern as published for recent years: always check the official JAM website before the exam. All questions are original.