Home / Learn / Exam prep / IIT JAM Physics / Lesson 2.3
All lessons

Module 2: Mechanics and properties of matter · Lesson 2.3 · about 40 min

Variable mass systems and rockets

How to apply Newton's second law when mass flows in or out: thrust, the Tsiolkovsky rocket equation, rockets in gravity, hovering and staging, conveyor belts, carts in the rain, chains lifted from a heap or falling onto a pan, and water jets.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Module 2 · about 40 minutes. By the end you will be able to write the equation of motion for any body that gains or loses mass, use the rocket equation in free space and in gravity, and solve the classic conveyor-belt, raindrop and chain problems without falling into the “F = d(mv)/dt” trap.

Newton's second law is about a fixed set of particles. When mass flows in or out, follow the momentum of everything, including the bit that is joining or leaving.

1. Why F = d(mv)/dt can mislead you

Newton’s law F→=dp→/dt holds for a fixed collection of particles. A rocket is not a fixed collection: every second some of it leaves as exhaust. Writing F=d(mv)/dt for the rocket alone gives wrong answers, for example for a leaking trolley that does not speed up at all.

The safe method is to look at the system over a short time dt: the body (mass m, velocity v→) plus the small mass dm that joins or leaves with velocity u→ (in the ground frame).

Before. The body has momentum mv, and a small mass |dm| about to join moves at u.

After. The body has mass m + dm and velocity v + dv. Count the momentum of everything that was there before.

Apply Newton to the fixed set. The change in total momentum is Fext dt. Expand and drop the tiny product dm dv.

Result. m dv/dt = Fext + (u − v) dm/dt. The same equation works for mass gained (dm > 0) and mass lost (dm < 0).

mdv→dt=F→ext+(u→−v→)dmdt

The last term is the thrust. It depends only on the velocity of the moving mass relative to the body, u→−v→. If material leaves or joins with the body’s own velocity, there is no thrust.

u − v
velocity of the added or ejected mass relative to the body
dm/dt
rate of change of the body's mass: positive when it gains, negative when it loses
(u − v) dm/dt
the thrust, a force on the body from the moving mass
Physical meaning
A body speeds up or slows down only if the mass it gains or loses moves relative to it. Throw mass backwards and you are pushed forwards.

Worked example (three trolleys). All three roll on frictionless rails at 4 m/s.

  1. Sand leaks through the floor (u→=v→): thrust zero, speed stays 4 m/s.
  2. Rain falls vertically in (u→=0 horizontally): mdv/dt=−vdm/dt, so mv is constant. A 20 kg trolley that collects 5 kg of water slows to 80/25=3.2 m/s.
  3. A boy on it throws stones backwards: it speeds up. That is a rocket.

2. The rocket equation

For a rocket the exhaust leaves at speed u relative to the rocket, backwards. In free space (Fext=0), with dm<0:

mdv=−udm⇒v−v0=uln⁡m0m,thrust=μu (μ=|dm/dt|)

This is the Tsiolkovsky rocket equation. Three facts every question tests:

  • The burn rate does not appear: in free space only the mass ratio m0/m and the exhaust speed matter.
  • The log grows slowly. Reaching v=u needs m0/m=e, so 63% of the launch mass must be fuel; v=2u needs 86%; v=3u needs 95%.
  • The final speed can exceed the exhaust speed. Then the newest exhaust actually moves forwards in the ground frame (at v−u), but the thrust is the same, because it depends only on the relative speed.
The speed gained, in units of the exhaust speed, rises only as the logarithm of the mass ratio. Switch on gravity to see a vertical launch lose g × (burn time) of it.

Worked example. A 1000 kg probe carries 600 kg of fuel and has u=2 km/s. v=2ln⁡(1000/400)=2ln⁡2.5=1.83 km/s. The ratio is launch mass over empty mass, not over fuel mass.

3. Rockets in gravity, hovering and staging

Going straight up in uniform gravity adds −mg:

mdvdt=μu−mg⇒v(t)=uln⁡m0m(t)−gt
  • Lift-off needs thrust greater than weight: μu>m0g. The initial acceleration is μu/m0−g.
  • Gravity loss gt: for a fixed amount of fuel, burn it as fast as you can, because every second spent burning costs g of speed.
  • Hovering needs μu=mg at every instant. As the mass falls the burn rate must fall too, so m=m0e−gt/u and the hover time is ugln⁡m0mempty.
  • Staging: the empty tank of a finished stage is dead weight. Dropping it raises the mass ratio of the next stage, so the same fuel gives more speed.

Worked example (staging). 1000 kg: stage 1 has 500 kg fuel + 100 kg structure, stage 2 has 250 kg fuel + 50 kg structure, payload 100 kg, u=2 km/s. Stage 1: 2ln⁡(1000/500)=1.39 km/s. Drop 100 kg; stage 2: 2ln⁡(400/150)=1.96 km/s. Total 3.35 km/s, against 2.77 km/s for one stage with the same fuel and structure.

To play with real numbers, use the rocket equation calculator or fly a model rocket with thrust curves and drag.

4. Belts, jets and dust: mass picked up from rest

When the incoming mass starts at rest, the force needed to keep the body at constant speed v is the momentum delivered per second:

F=dmdtv,P=Fv=dmdtv2=2×ddt(12mv2)

The motor’s power is twice the rate at which kinetic energy is created. The other half becomes heat, because each grain slides on the belt before it moves with it: a perfectly inelastic collision, repeated every instant. The same algebra gives

  • a water jet stopped by a wall: F=ρAv2 (twice that if it bounces straight back);
  • a spacecraft ploughing through still dust: thrust ρAv2 to keep its speed;
  • a drop falling through still mist: d(mv)/dt=mg, so it never reaches free-fall acceleration.

Worked example. Grain falls at 2 kg/s onto a belt moving at 3 m/s. F=6 N, P=18 W, kinetic energy gained 9 W, heat 9 W.

“The belt moves at constant speed, so no force is needed.” A constant speed of the belt does not mean constant momentum of the system: new mass keeps arriving at rest and must be brought up to speed. The same mistake makes people write F=λyg for a chain lifted at constant speed, forgetting the λv2 that sets each new link moving.

5. Chains: lifted from a heap and falling onto a pan

Lifted at constant speed v. The moving part (length y) has momentum λyv, growing at λv2. So F=λyg+λv2. Half of the λv3 part of the power is lost as heat, as on the belt.

Falling onto a pan. A chain hanging just above a scale is released. When a length x has landed, the arriving links move at 2gx and are stopped at the rate λ2gx:

N=λgx⏟weight on the pan+λv2⏟stopping the links=3λgx

Just as the last link lands the scale reads three times the chain’s weight, then drops to its weight.

Worked example (a hard one). A heap of chain (λ=0.5 kg/m) is pulled up by a constant force of 12 N. With p=λyv: d(λyv)/dt=F−λgy. Multiply by yv and use vdt=dy: (yv)2=Fλy2−23gy3, so the end stops at y=3F/2λg=3.67 m. Energy conservation would wrongly give 4.90 m, because each link is jerked into motion inelastically.

  • Variable mass: mdv→/dt=F→ext+(u→−v→)dm/dt; only the relative velocity of the moving mass makes a thrust.
  • Rocket: thrust μu; in free space Δv=uln⁡(m0/m), independent of the burn rate; Δv=u needs 63% fuel.
  • In gravity: v=uln⁡(m0/m)−gt; lift-off needs μu>m0g; hovering gives m=m0e−gt/u. Staging drops dead mass.
  • Picking up mass from rest at speed v: F=m˙v, P=m˙v2, half of it heat (belts, jets ρAv2, dust).
  • Chain lifted at speed v: F=λyg+λv2. Chain falling onto a pan: reading 3λgx.
  • Leaking mass with no relative velocity changes momentum but not speed.

Practise: exam questions on this lesson

They start easy and climb to top-rank level. More on the variable mass practice page.

Before this: lesson 2.2, work, energy and collisions. Next: lesson 2.4, central forces and orbits, where the same rockets go into orbit.

Go deeper: for GATE, momentum conservation in its relativistic form, including particles that lose rest mass as they decay, is in four-vectors and relativistic kinematics.

Check yourself

1A trolley full of sand rolls on a frictionless track while sand leaks straight down through a hole in its floor. Its speed
2Material drops onto a conveyor belt moving at constant speed v. What fraction of the motor's power becomes kinetic energy of the material?
3A rocket in free space burns fuel at a constant rate with constant exhaust speed. Its acceleration

Sources

  • D. Kleppner and R. Kolenkow, An Introduction to Mechanics, 2nd ed. (2014), chapter 4: momentum and systems with changing mass
  • J. R. Taylor, Classical Mechanics (2005), chapter 3: rockets
  • K. Tsiolkovsky, "Exploration of outer space by means of rocket devices" (1903), for the history of the rocket equation
  • IIT JAM Physics syllabus (Mechanics and General Properties of Matter), published by the organising IIT each year

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Not affiliated with IIT or the JAM organising institute. Exam pattern as published for recent years: always check the official JAM website before the exam. All questions are original.