All lessons

Module 16: Waves and sound · Lesson 16.1 · about 38 min

Waves and sound

Transverse and longitudinal waves, the wave equation and its terms, speed on a string and in gases, energy and intensity, decibels, reflection, superposition and interference, standing waves on strings and in open and closed pipes, resonance tubes and end correction, beats and the Doppler effect.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 11 · about 38 minutes. By the end you will be able to read a wave equation, find wave speeds on strings and in gases, handle intensity and decibels, explain interference and standing waves, find the harmonics of strings and pipes, and solve beats and Doppler problems.

A wave carries energy from place to place while the medium only jiggles about where it is. Where two waves meet, they simply add. Trap a wave between two ends and only the wavelengths that fit survive: these are the notes an instrument can play.

1. What a wave is

In a transverse wave the medium moves at right angles to the wave’s travel (a string, ripples, light). In a longitudinal wave it moves along the travel direction, in compressions and rarefactions (sound). Mechanical waves need a medium; sound cannot cross a vacuum.

A sine wave travelling in the +x direction:

y(x,t)=Asin⁡(kx−ωt+ϕ),k=2πλ,ω=2πf,v=fλ=ωk
A
amplitude, the largest displacement of a particle
λ, k
wavelength, and wave number 2π/λ (rad/m)
f, ω
frequency (Hz) and angular frequency 2πf
v
wave speed, set by the medium, not by the source
Physical meaning
Each particle does SHM at frequency f. The wave is the pattern of their phases, sliding along at v.

kx+ωt means travel in −x. The particle velocity ∂y/∂t is not the wave velocity; its maximum is Aω. Also ∂y∂t=−v∂y∂x: particle velocity = −(wave speed) × (slope of the string). Phase difference between two points: Δϕ=2πλΔx.

2. Wave speed

  • String with tension T and mass per length μ: v=T/μ.
  • Sound in a gas: v=γPρ=γRTM. (Newton used γ = 1 and got 280 m/s; Laplace saw that sound compressions are adiabatic.)
  • Liquids and solids: v=B/ρ and v=Y/ρ for a rod.

Sound in air: v ∝ √T (about +0.6 m/s per °C), does not change with pressure at fixed T, and rises with humidity (moist air is lighter).

3. Energy, intensity and loudness

A wave carries power P=12μω2A2v on a string. Intensity I = power per area (W/m²), ∝ A²f². From a point source, I=P/(4πr2), so I ∝ 1/r² and A ∝ 1/r.

Sound level in decibels: β=10log10⁡II0, with I0=10−12 W/m² (the faintest sound we hear). Ten times the intensity adds 10 dB; doubling adds 3 dB.

4. Reflection and superposition

At a fixed end (or a denser medium) a wave reflects upside down: a phase change of π. At a free end (or a rarer medium) it reflects upright. Transmitted waves never flip.

Superposition: where waves meet, their displacements add. Two waves of the same frequency with phase difference φ give amplitude A=A12+A22+2A1A2cos⁡ϕ.

  • Constructive: path difference = nλ (phase 2nπ), A=A1+A2.
  • Destructive: path difference = (n + ½)λ, A=|A1−A2|.
  • Intensities: Imax/Imin=(I1+I2I1−I2)2.

5. Standing waves: strings and pipes

Two equal waves travelling opposite ways make a standing wave, y=2Asin⁡kxcos⁡ωt. Nodes never move; antinodes swing the most. Neighbouring nodes are λ/2 apart, and a node and the next antinode λ/4. No energy flows along a standing wave.

The ends fix the pattern. Choose a system and a mode below.

Standing waves. A string has nodes (N) at both ends; an open pipe has antinodes (A) of air displacement at both ends; a closed pipe has a node at the closed end and an antinode at the open end, so only odd harmonics fit.
System Allowed frequencies Harmonics present
String fixed at both ends fn=nv2L all: 1, 2, 3, …
Pipe open at both ends fn=nv2L all
Pipe closed at one end f=(2n−1)v4L odd only: 1, 3, 5, …
  • Sonometer laws: f=12LTμ: f ∝ 1/L, ∝ √T, ∝ 1/√μ.
  • End correction: the antinode sits a little beyond the open end, about 0.6r for a tube of radius r. A closed pipe’s effective length is L + 0.6r; an open pipe’s is L + 1.2r.
  • Resonance tube: successive resonance lengths differ by λ/2, so v=2f(L2−L1), and the end correction cancels out.

“In a pipe, the air is still at the open end.” The open end is a displacement antinode: the air moves most there, and the pressure stays near atmospheric (a pressure node). The closed end is the opposite: air cannot move (displacement node), and pressure swings most.

6. Beats

Two sounds of nearly equal frequencies f₁ and f₂ drift in and out of step. The loudness rises and falls fbeat=|f1−f2| times per second. To find an unknown frequency: load a tuning fork with wax (its frequency falls) or file it (it rises) and see whether the beat rate goes up or down.

7. The Doppler effect

When source and listener move along the line joining them, in still air:

f′=fv+vov−vs

with v_o positive when the listener moves towards the source, and v_s positive when the source moves towards the listener. Approaching raises the pitch; going away lowers it.

  • Wind at speed w blowing from source to listener: replace v by v + w.
  • Echo from a wall when a car drives at u towards it: f′′=fv+uv−u.
  • If the motion is at an angle, use only the velocity components along the line joining source and listener.
  • When vs>v, the waves pile up into a shock wave (a sonic boom), in a cone of half-angle sin⁡θ=v/vs.

“The pitch of an approaching train keeps rising as it gets closer.” At constant speed, the pitch heard is steady and high while it approaches, then drops suddenly as it passes, and stays steady and low as it goes away. It is the loudness that keeps rising.

  • y = A sin(kx − ωt); v = fλ = ω/k; particle speed is not wave speed; Δφ = (2π/λ)Δx.
  • String v = √(T/μ); gas v = √(γRT/M), ∝ √T, independent of pressure.
  • I ∝ A²f², point source I ∝ 1/r²; β = 10 log(I/I₀); ×10 intensity = +10 dB.
  • Fixed end reflects with phase π; superposition A² = A₁² + A₂² + 2A₁A₂ cos φ.
  • Standing waves: nodes λ/2 apart; string and open pipe nv/2L, closed pipe odd harmonics (2n − 1)v/4L.
  • Resonance tube v = 2f(L₂ − L₁); end correction 0.6r.
  • Beats |f₁ − f₂|; Doppler f’ = f(v + v_o)/(v − v_s).

Check yourself

1A pipe open at both ends and a pipe closed at one end have the same length. The ratio of their fundamental frequencies (open : closed) is:
2The speed of sound in air is affected by:
3Two tuning forks of 256 Hz and 260 Hz sound together. You hear:

Sources

  • National Medical Commission NEET (UG) syllabus and JEE Main / JEE Advanced 2026 syllabi: Waves
  • Speed of sound in dry air ≈ 343 m/s at 20 °C (about 331 m/s at 0 °C); exams often use 330 or 340 m/s

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.