All lessons

Module 12: Heat, expansion, calorimetry and heat transfer · Lesson 12.1 · about 36 min

Heat, expansion, calorimetry and heat transfer

Temperature scales, linear, area and volume expansion, water's odd expansion, pendulum clocks and bimetallic strips, specific heat and latent heat with calorimetry, conduction through slabs in series and parallel, convection, black-body radiation with the Stefan-Boltzmann and Wien laws, and Newton's law of cooling.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 11 · about 36 minutes. By the end you will be able to convert between temperature scales, work out expansion and its effects, solve mixing problems with melting and boiling, find heat flow through walls and rods, and use the radiation and cooling laws.

Heat is energy moving because of a temperature difference. It can raise a temperature (by speeding up molecules), change a state (by breaking bonds), or make a body expand (molecules jiggle further apart). It travels by conduction, convection and radiation.

1. Temperature and its scales

Temperature tells which way heat will flow: from hot to cold. Two fixed points define a scale, so any two scales are linked by

C−0100=F−32180=K−273.15100

A change of 1 °C equals a change of 1 K and of 1.8 °F. −40° is the same on the Celsius and Fahrenheit scales. For a faulty thermometer with fixed points at a and b, use (reading − a)/(b − a) in the same way.

2. Thermal expansion

When heated by ΔT, lengths, areas and volumes grow:

ΔL=LαΔT,ΔA=AβΔT,ΔV=VγΔT,β=2α, γ=3α
α, β, γ
coefficients of linear, area and volume expansion, per K (or per °C)
ΔT
change in temperature
c
specific heat: heat to warm 1 kg by 1 K (J/kg K); water 4186
L
latent heat: heat to change the state of 1 kg at fixed temperature (J/kg)
Physical meaning
Atoms in a solid jiggle in a lopsided energy well; hotter atoms jiggle wider and their average spacing grows. Every length grows by the same fraction, including holes and gaps.
  • Density falls as volume grows: ρ′=ρ/(1+γΔT).
  • Liquids in containers: the apparent expansion seen is γapparent=γliquid−γvessel.
  • Water is odd: between 0 °C and 4 °C it contracts on heating; it is densest at 4 °C. So ponds freeze from the top, and the water at the bottom stays at 4 °C, letting fish survive.
  • Pendulum clock: T∝L, so in heat it runs slow, losing 12αΔT×86400 s per day.
  • Bimetallic strip: two metals with different α bonded together bend when heated, with the higher-α metal on the outside of the curve. Used in thermostats.
  • Thermal stress: a rod held between walls pushes with F=YAαΔT.

3. Specific heat, latent heat and calorimetry

Heat to change temperature: Q=mcΔT (heat capacity = mc). Heat to change state at a fixed temperature: Q=mL. For water: c ≈ 4200 J/kg K, ice ≈ 2100, latent heat of fusion ≈ 3.34 × 10⁵ J/kg, of vaporisation ≈ 2.26 × 10⁶ J/kg.

Watch a heater warm ice all the way to steam.

Heating curve of water at a steady power. Sloped parts: Q = mcΔT, steeper where c is smaller. Flat parts: melting and boiling, Q = mL. Boiling takes over five times as long as warming the water from 0 to 100 °C.

Calorimetry (principle of mixtures): in an insulated container, heat lost by hot bodies = heat gained by cold ones. With ice or steam, always check first whether there is enough heat to melt all the ice (or condense all the steam). If not, the final temperature is 0 °C (or 100 °C) with some ice (or steam) left.

“Steam at 100 °C and water at 100 °C burn equally.” Steam is far worse. Each gram of steam that condenses on skin gives up about 2260 J of latent heat before it even starts to cool, five times what it gives by cooling from 100 °C to 0 °C.

4. Conduction

Heat flows through a slab of area A and thickness L, with faces at T₁ and T₂, at the rate

H=dQdt=kA(T1−T2)L

k is the thermal conductivity (W/m K): silver about 400, glass about 1, air 0.026. Treat R=L/(kA) as a thermal resistance; then heat current behaves like electric current.

  • Series (layers one after the other, same H): R=R1+R2. The temperature drop across each layer is in proportion to its R.
  • Parallel (side by side, same ΔT): 1/R=1/R1+1/R2.
  • Equivalent conductivity of two equal-length slabs in series: 2k1k2k1+k2; in parallel with equal areas: k1+k22.
  • Ice growing on a pond (air at −θ): thickness x grows as dxdt=kθρLx, so the time to grow from x₁ to x₂ is ρL2kθ(x22−x12). The second centimetre takes three times as long as the first.

5. Convection and radiation

Convection carries heat by moving fluid: warm, less dense fluid rises. Sea breezes, room heaters and the trade winds are examples.

Radiation needs no medium; it is electromagnetic waves. A perfect absorber, a black body, is also the best emitter.

  • Stefan-Boltzmann law: power radiated P=eσAT4, with T in kelvin, σ = 5.67 × 10⁻⁸ W m⁻² K⁻⁴, and emissivity e between 0 and 1 (e = 1 for a black body). Net loss to surroundings at T₀: eσA(T4−T04).
  • Kirchhoff’s law: good absorbers are good emitters (at each wavelength, emissivity = absorptivity).
  • Wien’s displacement law: the peak of the spectrum is at λmT=b ≈ 2.9 × 10⁻³ m K. Hotter bodies peak at shorter wavelengths: a heated iron rod glows red, then orange, then white. The Sun (about 5800 K) peaks near 500 nm.

“A body stops radiating when it cools to room temperature.” Every body above absolute zero radiates all the time. At room temperature it simply absorbs as much from its surroundings as it emits, so the net flow is zero.

6. Newton’s law of cooling

For a small temperature excess over the surroundings, the rate of cooling is proportional to it: dTdt=−k(T−T0), so the excess falls exponentially, T−T0=(Ti−T0)e−kt.

Exam shortcut (average form): T1−T2t=k(T1+T22−T0).

Worked example (level 3). A cup cools from 80 °C to 60 °C in 5 min in a 20 °C room. How long from 60 °C to 40 °C? First: 20/5 = k(70 − 20), so k = 0.08 per min. Second: 20/t = 0.08 × (50 − 20) = 2.4, so t ≈ 8.3 min. Cooling slows as the excess shrinks.

  • C/100 = (F − 32)/180 = (K − 273.15)/100; −40 °C = −40 °F.
  • ΔL = LαΔT, β = 2α, γ = 3α; holes expand too; water is densest at 4 °C.
  • Pendulum clock loses ½αΔT × 86 400 s a day; thermal stress YαΔT.
  • Q = mcΔT and Q = mL; in mixtures check whether all the ice melts first.
  • Conduction H = kAΔT/L; resistance L/kA in series and parallel; ice thickness grows as √t.
  • Radiation P = eσAT⁴; Wien λ_m T = 2.9 × 10⁻³ m K; good absorbers are good emitters.
  • Newton’s cooling: rate ∝ excess temperature; use the average form for exam numbers.

Check yourself

1While ice is melting at 0 °C, heat is supplied steadily. Its temperature:
2A metal plate with a circular hole is heated. The hole:
3If the absolute temperature of a black body is doubled, the power it radiates becomes:

Sources

  • National Medical Commission NEET (UG) syllabus and JEE Main / JEE Advanced 2026 syllabi: Thermal properties of matter
  • Stefan-Boltzmann constant σ = 5.670 374 419 × 10⁻⁸ W m⁻² K⁻⁴ (exact in the 2019 SI) and Wien displacement constant b = 2.897 771 955 × 10⁻³ m K, CODATA 2018 via NIST https://physics.nist.gov/cuu/Constants/
  • Specific and latent heats of water: CRC Handbook of Chemistry and Physics, rounded as exams use them

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.