All lessons

Module 79: Vectors · Lesson 79.1 · about 36 min

Vectors

Vectors and their components, magnitude, unit vectors and direction cosines, the section formula, collinear and coplanar points, the dot product with angle, projection and work, the cross product with area, scalar and vector triple products, Lagrange identity, linear independence, angle bisectors and vector equations.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Maths · Class 12 · about 36 minutes. By the end you will be able to work with vectors in components, use the section formula, compute and interpret dot and cross products, find areas, volumes, projections and angles, and simplify triple products, up to the vector-equation questions of JEE Advanced.

A vector is an arrow: a size and a direction. The dot product asks "how much do two arrows point the same way?" and gives a number. The cross product asks "how much do they spread apart?" and gives a new arrow at right angles to both, whose length is the area they span. Almost every vector question is one of these two questions in disguise.

1. Components, magnitude and direction

With unit vectors i, j, k along the axes, a = a₁i + a₂j + a₃k and |a→|=a12+a22+a32. The unit vector along a is â = a/|a|. The position vector of B relative to A is AB = (position of B) − (position of A).

Direction cosines are l = a₁/|a|, m = a₂/|a|, n = a₃/|a|, the cosines of the angles a makes with the axes, and l² + m² + n² = 1. Any multiples (a₁, a₂, a₃) are direction ratios.

Two vectors are parallel when one is a multiple of the other (components in the same ratio).

2. Section formula, collinear and coplanar

The point dividing AB in the ratio m : n has position vector

r→=mb→+na→m+n (internal),r→=mb→−na→m−n (external)

The midpoint is (a + b)/2 and the centroid of a triangle is (a + b + c)/3. Three points A, B, C are collinear when AB is parallel to AC. Four points are coplanar when the three edge vectors from one of them have a zero scalar triple product (section 5).

Angle bisector. The internal bisector of the angle between a and b points along â + b̂ (the sum of the unit vectors); the external along â − b̂.

3. The dot product

a→⋅b→=|a→||b→|cos⁡θ=a1b1+a2b2+a3b3
θ
the angle between a and b when placed tail to tail, from 0 to π
a · b > 0, = 0, < 0
acute, perpendicular, obtuse
Projection of b on a
(a · b)/|a|: the signed length of b's shadow along a; the vector projection is ((a · b)/|a|²) a
a · a
|a|²
Physical meaning
The dot product measures how much one arrow helps the other. Work done by a force F over a displacement d is F · d: only the part of the force along the motion does work.

Useful expansions: |a + b|² = |a|² + |b|² + 2a · b. If |a + b| = |a − b|, then a · b = 0. The triangle inequality |a + b| ≤ |a| + |b| holds, with equality only when a and b point the same way.

The thick bar along a is the projection of b on a; a · b is |a| times it. The shaded parallelogram has area |a × b|. One shrinks as the other grows.

4. The cross product

a→×b→=|a→||b→|sin⁡θnˆ=|iˆjˆkˆa1a2a3b1b2b3|

n̂ is perpendicular to both a and b, in the direction a right-hand screw moves when turned from a to b. Properties: a × b = −(b × a), a × a = 0, and a × b = 0 exactly when a and b are parallel. i × j = k, j × k = i, k × i = j.

  • Area of a parallelogram with sides a, b: |a × b|. With diagonals d₁, d₂: ½|d₁ × d₂|.
  • Area of triangle ABC: ½|AB × AC|.
  • A unit vector perpendicular to both a and b: ±(a × b)/|a × b|.

Lagrange identity: |a→×b→|2+(a→⋅b→)2=|a→|2|b→|2, which is just sin²θ + cos²θ = 1. The figure’s readout checks it live.

“a × b = a × c means b = c.” It only means a × (b − c) = 0, so b − c is parallel to a. Likewise a · b = a · c only says b − c is perpendicular to a. You cannot cancel a vector from a product. If both a · b = a · c and a × b = a × c hold (with a ≠ 0), then b = c.

5. Scalar triple product

[a→ b→ c→]=a→⋅(b→×c→)=|a1a2a3b1b2b3c1c2c3|

Its absolute value is the volume of the parallelepiped with edges a, b, c; a tetrahedron is one sixth of that. It is unchanged by a cyclic shift ([a b c] = [b c a] = [c a b]), changes sign when two vectors swap, and is zero when two vectors are equal or when all three are coplanar. Three vectors are linearly independent exactly when [a b c] ≠ 0, and then every vector is a combination xa + yb + zc.

Results to know: [a + b, b + c, c + a] = 2[a b c]; [a × b, b × c, c × a] = [a b c]².

6. Vector triple product

a→×(b→×c→)=(a→⋅c→)b→−(a→⋅b→)c→

Memory aid: “bac minus cab” (b(a · c) − c(a · b)). The answer lies in the plane of b and c. The bracket matters: (a × b) × c is generally different, and lies in the plane of a and b.

7. JEE Advanced level: vector equations and reciprocal systems

Solving for an unknown vector. For r × a = b × a, write (r − b) × a = 0, so r = b + ta. If also r · c = 0, fix t: t = −(b · c)/(a · c). Strategy: take the dot or cross of the given equation with a well-chosen known vector to kill unknown terms.

Reciprocal system. For non-coplanar a, b, c, define a′ = (b × c)/[a b c] and similarly b′, c′. Then a · a′ = 1 and a · b′ = 0, and [a′ b′ c′] = 1/[a b c].

Gram determinant. [a b c]² equals the determinant of the 3 × 3 matrix of all dot products (a · a, a · b, …). It gives the volume when only lengths and angles are known.

Minimum distance and skew lines. The shortest distance between the lines r = a₁ + λb₁ and r = a₂ + μb₂ is |(a₂ − a₁) · (b₁ × b₂)|/|b₁ × b₂|: project the joining vector onto the common perpendicular. More on this in three-dimensional geometry.

Next: Vectors: question types and traps.

  • |a| = √(a₁² + a₂² + a₃²); â = a/|a|; direction cosines satisfy l² + m² + n² = 1.
  • Section formula (mb + na)/(m + n); centroid (a + b + c)/3; bisector along â + b̂.
  • a · b = |a||b|cos θ = Σaᵢbᵢ; zero means perpendicular; projection of b on a = a · b/|a|.
  • |a × b| = |a||b|sin θ = parallelogram area; zero means parallel; triangle = half.
  • [a b c] = determinant = signed volume; zero means coplanar; tetrahedron = 1/6 of it.
  • a × (b × c) = (a · c)b − (a · b)c.
  • Never cancel a vector from a dot or cross product.

Check yourself

1For a = i + 2j + 2k, the magnitude |a| is:
2If a · b = 0 and neither vector is zero, then:
3The area of the parallelogram with sides a and b is:

Sources

  • NCERT Mathematics Class 12 (Vector algebra): topics followed, no text copied
  • JEE Main and JEE Advanced 2026 syllabi: Vector algebra

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.