All lessons

Module 21: Magnetism and matter · Lesson 21.2 · about 26 min

Magnetism and matter: question types and traps

Every way entrance exams ask about magnetism and matter: dipole fields, cut and bent magnets, combinations, torque, energy and oscillations, Earth's field, dip and neutral points, B, H, M and susceptibility, classifying materials, Curie's law and hysteresis, each with a method and its trap.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 12 · about 26 minutes. Read the lesson Magnetism and matter first. Here you meet every question type, with the method and the trap, then practise.

Treat every magnet as a vector arrow m and every material as a number χ. Arrow questions (fields, torques, combinations, oscillations) copy the electric dipole; number questions (classification, Curie, hysteresis) need the table of materials.

The nine question types

1. Dipole fields. Axis 2× equator at the same distance. Point at angle θ: (μ₀/4π)(m/r³)√(1 + 3cos²θ). Trap: using 1/r² as for a single pole.
2. Cutting, bending, combining. Moments add as vectors; cut across keeps pole strength; bend into an arc of angle θ: m' = m × (chord/length). Trap: adding magnitudes of crossed magnets.
3. Torque, work and energy. τ = mB sin θ, W = mB(cos θ₁ − cos θ₂). Trap: stable is θ = 0 with U = −mB; unstable is θ = 180°.
4. Oscillation magnetometer. T = 2π√(I/mB); compare fields or moments by T². Two magnets tied like poles together oscillate faster (m₁ + m₂), unlike poles slower (m₁ − m₂). Trap: forgetting that I also changes when a magnet is cut.
5. Earth's field and dip. B_H = B cos δ, B_V = B sin δ. Apparent dip in a plane at angle α to the meridian: tan δ' = tan δ / cos α; true dip from two perpendicular planes: cot²δ = cot²δ₁ + cot²δ₂. Trap: mixing up the angle with the vertical and with the horizontal.
6. Neutral points. N pointing north: equatorial line, (μ₀/4π)m/r³ = B_H. N pointing south: axis, (μ₀/4π)2m/r³ = B_H. Trap: putting the neutral point on the wrong line.
7. B, H, M and χ. H = nI; M = χH; B = μ₀(H + M). Trap: H in a solenoid does not depend on the core; B does.
8. Classifying materials. Sign and size of χ, behaviour in a non-uniform field, effect of temperature. Trap: diamagnetism exists in all materials but is hidden when para- or ferromagnetism is present.
9. Hysteresis and energy loss. Energy per cycle per volume = loop area; power loss = area × volume × frequency. Choose soft iron for cores, steel for magnets. Trap: wanting high retentivity for an electromagnet; it should lose its magnetism when switched off.

Worked examples

Example 1 (level 3, bent magnet). A thin magnet of moment m and length L is bent at its middle to make an L shape (90°). New moment?

Solution. The poles are now at the ends of two arms of length L/2 at right angles: separation (L/2)2+(L/2)2=L/2. Pole strength unchanged, so m’ = m/√2.

Example 2 (level 4, oscillations in two arrangements). Two magnets with moments m₁ and m₂ (m₁ > m₂) and equal moments of inertia are tied together, first with like poles together, then with unlike. The periods are T₁ and T₂ with T₂ = 3T₁. Find m₁/m₂.

Solution. T22T12=m1+m2m1−m2=9, so m₁ + m₂ = 9m₁ − 9m₂ and m₁/m₂ = 10/8 = 1.25.

Example 3 (level 4, true dip). In two vertical planes at right angles to each other, a dip needle shows 30° and 45°. Find the true dip.

Solution. cot2⁡δ=cot2⁡30°+cot2⁡45°=3+1=4, so cot δ = 2 and δ = tan⁻¹(1/2) ≈ 26.6°. Check: the true dip is less than both apparent dips, as it must be.

Example 4 (level 5, hysteresis loss). An iron core of volume 500 cm³ has a hysteresis loop of area 300 J/m³ per cycle and runs on 50 Hz. Power lost?

Solution. P = 300 × (500 × 10⁻⁶) × 50 = 7.5 W, all turned into heat in the core.

“A diamagnet has no atomic magnets, so it cannot respond to a field.” Its atoms have zero net moment, but an applied field changes the electrons’ orbital motion (Lenz’s law at the atomic scale) and induces a small moment opposite to the field. That is diamagnetism.

Combination
like poles together: m₁ + m₂; unlike: m₁ − m₂; at 90°: √(m₁² + m₂²)
Apparent dip
tan δ' = tan δ / cos α, where α is the plane's angle with the magnetic meridian
Physical meaning
Only the horizontal part of the Earth's field turns a compass in a flat plane; the vertical part is why a dip needle tilts.

Practise

The set climbs from level 1 to level 5 and includes numericals, assertion-reason, statements, matching lists, multi-correct and passage questions. Templates give new numbers each time.

  • Nine types: dipole fields, cut and bent magnets, torque and energy, oscillations, dip, neutral points, B-H-M, materials, hysteresis.
  • Moments add as vectors; L-bend gives m/√2, semicircle 2m/π.
  • T² ∝ 1/(mB); like poles together oscillate faster.
  • True dip from two planes: cot²δ = cot²δ₁ + cot²δ₂.
  • H = nI does not depend on the core.
  • Hysteresis power = loop area × volume × frequency.

Check yourself

1Two identical short magnets of moment m are placed to form a plus sign (crossed at their centres). The net moment is:
2The susceptibility of a paramagnetic salt is 2 × 10⁻⁴ at 300 K. At 150 K it is:
3At a place the dip is 60° and the horizontal component is 30 µT. The total field is:

Sources

  • JEE Main, JEE Advanced 2026 and NEET (UG) syllabi: Magnetism and matter; question patterns studied from the exams' published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.