All lessons

Module 13: Thermodynamics · Lesson 13.1 · about 36 min

Thermodynamics

The zeroth and first laws, internal energy and work on P-V diagrams, isothermal, adiabatic, isobaric, isochoric and polytropic processes, molar specific heats, cyclic processes, heat engines, the Carnot engine, refrigerators and heat pumps, the second law and entropy.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 11 · about 36 minutes. By the end you will be able to apply the first law to any process, find work from a P-V graph, use the formulas for the four standard processes, analyse cycles, and work out the efficiency of engines and the performance of refrigerators.

Heat and work are two ways of moving energy into a gas. What the gas keeps is its internal energy, which for an ideal gas depends only on its temperature. The first law is energy bookkeeping; the second law says you can never turn all the heat into work.

1. The zeroth and first laws

Zeroth law: if A and B are each in thermal equilibrium with C, they are in equilibrium with each other. That is what lets a thermometer work, and it defines temperature.

First law:

Q=ΔU+W
Q
heat given to the gas (positive when heat flows in)
ΔU
change in internal energy; for an ideal gas ΔU = nC_vΔT in every process
W
work done by the gas, ∫P dV (positive when it expands)
γ
C_p/C_v: 5/3 for monatomic, 7/5 for diatomic gases
Physical meaning
Heat in either stays in the gas as faster molecules or leaves as work pushing a piston. Nothing is lost.

Q and W depend on the path; U is a state function that depends only on the state (P, V, T). That is why ΔU=nCvΔT holds even when the volume is not constant.

2. Work on a P-V diagram

W=∫PdV is the area under the curve on a P-V graph. Expansion gives positive work, compression negative. Around a cycle, the net work is the area enclosed: clockwise means the gas does net work (an engine), anticlockwise means work is done on it (a refrigerator).

Pick a process below and watch the work area and the energy split.

One mole of ideal gas starting at 300 K and 1 atm. The slider sets the end volume as a multiple of the start (the end pressure for the isochoric case). The shaded area is the work done by the gas; the readout splits the heat by the first law.

3. The four standard processes

Process Constant Work by gas W Heat Q ΔU
Isochoric V 0 nCvΔT = Q
Isobaric P PΔV=nRΔT nCpΔT nCvΔT
Isothermal T (PV = constant) nRTln⁡V2V1 = W 0
Adiabatic Q = 0 (PVγ = constant) P1V1−P2V2γ−1=nR(T1−T2)γ−1 0 = −W
  • Adiabatic forms: PVγ, TVγ−1 and TγP1−γ are constant.
  • On a P-V graph, an adiabatic curve is steeper than an isothermal one through the same point, by a factor γ (slope −γP/V against −P/V).
  • Polytropic process PVx = constant: W=nRΔT1−x with sign care, and molar heat C=Cv+R1−x. x = 0 is isobaric, 1 isothermal, γ adiabatic, ∞ isochoric.
  • Free expansion into a vacuum: no work, no heat, so ΔU = 0 and T stays the same for an ideal gas.

“Heat and temperature are the same; if you add heat, the temperature must rise.” In an isothermal expansion, heat flows in and the temperature stays the same: all of it leaves as work. In an adiabatic compression, no heat flows in and the temperature still rises.

4. Molar specific heats of gases

At constant volume, all heat goes into U: Cv. At constant pressure, part goes into work too, so Cp>Cv. Mayer’s relation: Cp−Cv=R.

Gas Degrees of freedom f C_v C_p γ
Monatomic (He, Ar) 3 32R 52R 5/3 ≈ 1.67
Diatomic (O₂, N₂), room temperature 5 52R 72R 7/5 = 1.4
Rigid polyatomic 6 3R 4R 4/3

In general Cv=f2R and γ=1+2f. For a mixture, add the n C_v values and divide by the total moles.

5. Heat engines and refrigerators

A heat engine takes heat Q_h from a hot source, does work W, and rejects Q_c to a cold sink: W=Qh−Qc, efficiency η=WQh=1−QcQh.

A refrigerator runs backwards: work W moves heat Q_c out of the cold space and dumps Q_h = Q_c + W outside. Its coefficient of performance β=QcW. A heat pump warms a house: its performance is Qh/W=β+1.

The Carnot engine (two isothermals and two adiabatics, all reversible) is the best possible between two temperatures:

ηCarnot=1−TcTh,βCarnot=TcTh−Tc

with temperatures in kelvin. Its efficiency depends only on the two temperatures, not on the working gas.

6. The second law and entropy

  • Kelvin-Planck: no engine working in a cycle can turn all the heat it takes in into work. So η < 1 always.
  • Clausius: heat cannot flow by itself from a colder body to a hotter one; a refrigerator needs work.

Entropy S measures how spread out energy is. For a reversible change, dS=dQ/T. Melting m kg of ice at 0 °C: ΔS=mL/273. In any real (irreversible) process in an isolated system, total entropy rises; in a reversible one, it stays the same. Heat flowing from hot to cold always increases total entropy.

“A perfect engine just needs a perfect, friction-free design.” Even a perfect, reversible engine must throw some heat into a cold sink. Between 600 K and 300 K, no engine of any design can turn more than half the heat into work.

Worked example (level 4, cycle). One mole of a monatomic gas goes A → B at constant volume (P doubles from P₀), B → C at constant pressure (V doubles from V₀), and back to A along a straight line. Net work = area of the triangle = ½ × V₀ × P₀ = ½P₀V₀. Heat in: A → B, 32V0P0; B → C, 52×2P0V0=5P0V0. So η = 0.5/6.5 ≈ 7.7%, far below the Carnot value of 1 − T_A/T_C = 1 − 1/4 = 75%.

  • Q = ΔU + W; ΔU = nC_vΔT for any process of an ideal gas; U is a state function.
  • Work = area under P-V; net work of a cycle = enclosed area (clockwise: engine).
  • Isothermal W = nRT ln(V₂/V₁); adiabatic PV^γ constant, W = nRΔT/(γ − 1) (with T₁ − T₂).
  • Adiabatic curves are γ times steeper than isothermals on P-V.
  • C_p − C_v = R; C_v = (f/2)R; γ = 1 + 2/f: 5/3 monatomic, 7/5 diatomic.
  • Engine η = 1 − Q_c/Q_h; Carnot η = 1 − T_c/T_h; refrigerator β = T_c/(T_h − T_c).
  • Second law: no engine is 100% efficient; entropy of an isolated system never falls; dS = dQ/T.

Check yourself

1In an adiabatic expansion of an ideal gas:
2In a complete cycle, the change in internal energy of the gas is:
3A Carnot engine works between 500 K and 300 K. Its efficiency is:

Sources

  • National Medical Commission NEET (UG) syllabus and JEE Main / JEE Advanced 2026 syllabi: Thermodynamics
  • Molar gas constant R = 8.314 462 618 J mol⁻¹ K⁻¹ (exact in the 2019 SI), CODATA 2018 via NIST https://physics.nist.gov/cgi-bin/cuu/Value?r

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.