All lessons

Module 67: Circles · Lesson 67.2 · about 26 min

Circles: question types and traps

Every way entrance exams test circles: centre and radius, diameter form, circles touching the axes, chord length, tangents at and from a point, tangent length, chord of contact and chord with a midpoint, angle between tangents, director circle, nearest and farthest points, common tangents, orthogonal circles, radical axis and locus, each with its method and its trap.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Maths · Class 11 · about 26 minutes. Read Circles first. Here are the question types, worked examples and practice.

Turn every circle condition into a distance from the centre and compare it with the radius. Tangent: distance equals r. Chord: use the right triangle of r, p and half the chord. Two circles: compare the distance between centres with the sum and difference of radii.

The question types

1. Centre and radius. Divide by the x² coefficient, then (−g, −f) and √(g² + f² − c). Trap: reading g as the coefficient of x instead of half of it.
2. Circle from conditions. Diameter form, three points, touching axes, centre on a line. Trap: "touches the x-axis" means |k| = r, so there are often two answers.
3. Chord length and intercepts. 2√(r² − p²); axis intercepts 2√(g² − c) and 2√(f² − c). Trap: forgetting the factor 2.
4. Tangent conditions. Distance from the centre equals r; c² = a²(1 + m²). Trap: missing a vertical tangent, which has no slope.
5. Tangents from a point and their length. √S₁. Trap: using S₁ before dividing the equation by the x² coefficient.
6. Chord of contact and chord with a midpoint. T = 0 and T = S₁. Trap: swapping the two.
7. Angle between tangents and director circle. tan(θ/2) = r/√S₁; x² + y² = 2a². Trap: using θ instead of θ/2.
8. Nearest and farthest points. Along the line through the centre: d − r and d + r. Trap: |d − r| when P is inside.
9. Two circles. Common tangents from d versus r₁ ± r₂; orthogonality; radical axis S₁ − S₂ = 0. Trap: both equations must be in standard form before subtracting.
10. Families and locus. S + λL = 0, S₁ + λS₂ = 0; locus of a moving centre or midpoint. Trap: the family S₁ + λS₂ never gives S₂ itself.

Worked examples

Example 1 (level 3, touching axes). Find the circles of radius 3 that touch both axes and have centre in the fourth quadrant. Solution. Centre (3, −3): (x − 3)² + (y + 3)² = 9. Without the quadrant there would be four such circles.

Example 2 (level 4, locus of a midpoint). Find the locus of the midpoints of chords of x² + y² = a² that pass through the fixed point (p, q). Solution. For midpoint (h, k), the chord is T = S₁: hx + ky = h² + k². It passes through (p, q): hp + kq = h² + k². Locus x² + y² − px − qy = 0, a circle on the segment from the origin to (p, q) as diameter.

Example 3 (level 4, angle between tangents). From a point on x² + y² = 4, tangents are drawn to x² + y² = 1. Find the angle between them. Solution. S₁ = 4 − 1 = 3, so tan(θ/2) = r/√S₁ = 1/√3, θ/2 = 30°. θ = 60°. Every point of the outer circle sees the inner circle under the same angle.

Example 4 (level 5, common tangents and radical axis). For S₁: x² + y² − 4x − 6y + 9 = 0 and S₂: x² + y² + 2x + 2y − 7 = 0, decide their position and find their common chord. Solution. Centres (2, 3) and (−1, −1), radii 2 and 3, d = 5 = r₁ + r₂. They touch externally (3 common tangents). S₁ − S₂ = 0 gives −6x − 8y + 16 = 0, that is 3x + 4y = 8: here the radical axis is the common tangent at the point of contact.

“Subtracting two circle equations always gives their common chord.” Only when the circles meet in two points. If they touch, it gives the common tangent at the contact point; if they do not meet, it is still the radical axis, a line of equal tangent lengths that the circles never reach.

d
distance between the centres of two circles
S₁ − S₂ = 0
radical axis: points with equal tangent lengths to both circles
Physical meaning
Two circles are just two distances. Compare d with r₁ + r₂ and |r₁ − r₂| and you know how they sit, how many tangents they share and whether they meet.

Practise

  • Standard form first (x² and y² coefficient 1), then read g, f, c.
  • Tangent ⇔ distance from centre = r; chord = 2√(r² − p²).
  • T = 0: tangent at a point on the circle, chord of contact from outside. T = S₁: chord with given midpoint.
  • tan(θ/2) = r/√S₁ for the angle between tangents; director circle x² + y² = 2a².
  • Common tangents 4, 3, 2, 1, 0 as d moves from apart to inside.
  • Locus of chord midpoints through a fixed point: a circle on the segment to the centre as diameter.

Check yourself

1The length of the tangent from (5, 1) to x² + y² + 6x − 4y − 3 = 0 is:
2The circles x² + y² + 2x + 2ky + 6 = 0 and x² + y² + 2ky + k = 0 cut orthogonally when k is:
3The chord of x² + y² = 25 with midpoint (1, 2) lies on the line:

Sources

  • JEE Main and JEE Advanced 2026 syllabi: Coordinate geometry (circles); question patterns studied from published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.