All lessons

Module 69: Limits · Lesson 69.1 · about 36 min

Limits

What a limit means, left and right limits and when a limit exists, the greatest integer and modulus functions, algebra of limits, factorising and rationalising, the standard trigonometric, exponential and logarithmic limits, limits at infinity, the squeeze rule for bounded functions, series expansions, and 1^∞, 0 × ∞ and ∞ − ∞ forms.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Maths · Class 11 · about 36 minutes. By the end you will be able to decide when a limit exists, remove a 0/0 form by factorising, rationalising or the standard limits, handle limits at infinity and 1^∞ forms, and use series expansions for the harder JEE Advanced limits.

A limit asks where a function is heading, not where it is. f(a) may be undefined, or even different, but if the values close in on one number L from both sides as x approaches a, then L is the limit. Almost all exam limits are 0/0 forms where the work is to cancel the part that is going to zero.

1. What a limit means

We write limx→a⁡f(x)=L when f(x) can be made as close to L as we like by taking x close enough to a, from either side, without x ever being equal to a.

x → a
x gets closer and closer to a, but never equals it
LHL, RHL
left-hand limit (x → a⁻, from below) and right-hand limit (x → a⁺, from above)
L
the limit: the single value both sides approach
Indeterminate form
a shape like 0/0, ∞/∞, 1^∞, 0 × ∞ or ∞ − ∞ that does not tell you the answer by itself
Physical meaning
A limit is a prediction from nearby values. That is why calculus can talk about speed at an instant: distance over time is 0/0 at the instant, but the values just before and after close in on one number.

The limit exists only if LHL and RHL both exist and are equal. Check both sides whenever the function changes its rule at a: greatest integer [x], fractional part {x}, modulus |x|, piecewise functions, and expressions like 1/x or e^{1/x} near 0.

Each function is undefined at x = 0 (open circle), yet the values at −h and +h close in on one number as h shrinks. Slide h towards 0 and watch the gap fall.

Greatest integer. At an integer n, limx→n+⁡[x]=n but limx→n−⁡[x]=n−1. At a non-integer, [x] is constant nearby and the limit is just its value.

2. Algebra of limits and the first methods

If both limits exist, the limit of a sum, difference, product or quotient (denominator limit not zero) is the sum, difference, product or quotient of the limits. If direct substitution gives a number, that is the answer. If it gives 0/0:

  • Factorise and cancel the common factor (x − a). Useful: limx→a⁡xn−anx−a=nan−1.
  • Rationalise when roots appear: multiply top and bottom by the conjugate, so x+4−2 becomes x/(x+4+2).
  • Substitute x = a + h to move the limit to h → 0.

“0/0 = 1, because anything divided by itself is 1.” 0/0 is not a number. The limits of x/x, 2x/x and x²/x as x → 0 are 1, 2 and 0: all 0/0 shapes, all different answers. The form tells you to do more work, not what the answer is.

3. The standard limits (as x → 0)

sin⁡xx→1,tan⁡xx→1,1−cos⁡xx2→12,ex−1x→1,ax−1x→ln⁡a,ln⁡(1+x)x→1
limx→0⁡(1+x)1/x=e,limx→∞⁡(1+1x)x=e

The x inside must match the x outside. For sin⁡3x/x, write it as 3⋅sin⁡3x3x→3. The trigonometric limits need x in radians.

Why sin x / x → 1. For a small angle x in a unit circle, the area of the small triangle, the sector and the big triangle give sin⁡x<x<tan⁡x. Divide by sin x and let x → 0: x/sin x is squeezed between 1 and 1/cos x, both tending to 1.

4. Limits at infinity

For a ratio of polynomials as x → ∞, divide top and bottom by the highest power of x in the denominator:

  • same degree: the ratio of the leading coefficients;
  • top degree lower: 0;
  • top degree higher: ±∞ (the limit does not exist as a number).

For x2+x−x (∞ − ∞), rationalise: it becomes x/(x2+x+x)→1/2. Remember that x2=|x|, so as x → −∞ it equals −x: the sign flips.

Squeeze (sandwich) rule. If g(x) ≤ f(x) ≤ h(x) near a and g and h have the same limit L, then f does too. Because |sin| ≤ 1, xsin⁡1x→0 as x → 0, and sin⁡xx→0 as x → ∞. A bounded factor times something going to zero goes to zero.

5. The 1^∞ form

If f → 1 and g → ∞, then

lim⁡f(x)g(x)=elim⁡g(x)(f(x)−1)

Worked example. limx→0⁡(cos⁡x)1/x2. Here f − 1 = cos x − 1 and g = 1/x², so the exponent tends to lim⁡cos⁡x−1x2=−12. The limit is e−1/2.

6. Series expansions (JEE Advanced)

When standard limits are not enough, replace each function by the first few terms of its series near 0:

sin⁡x=x−x36+⋯,cos⁡x=1−x22+x424−⋯,tan⁡x=x+x33+⋯
ex=1+x+x22+⋯,ln⁡(1+x)=x−x22+x33−⋯,(1+x)n=1+nx+n(n−1)2x2+⋯

Worked example. limx→0⁡x−sin⁡xx3. Top = x − (x − x³/6 + …) = x³/6 + …, so the limit is 1/6. Keep terms up to the power in the denominator, and no further.

Finding constants. If limx→0⁡asin⁡x+bx+x3x3 is finite, the x terms on top must cancel: a + b = 0. Then the top is −ax³/6 + x³ + …, so the limit is 1 − a/6. Questions of the “find a and b” type are all like this.

“I can replace sin x by x everywhere, since sin x ≈ x.” Only when it is a factor of a product or quotient. In x − sin x the x terms cancel, and what is left (x³/6) is exactly the part the shortcut throws away. Use the series with enough terms whenever subtraction is involved.

  • The limit exists only if LHL = RHL; check both at jumps ([x], {x}, |x|, piecewise, e^{1/x}).
  • 0/0: factorise, rationalise, or use a standard limit with matching inner and outer x.
  • sin x/x, tan x/x, (eˣ − 1)/x, ln(1 + x)/x → 1; (1 − cos x)/x² → 1/2; (aˣ − 1)/x → ln a.
  • At infinity: divide by the highest power in the denominator; √(x²) = |x|.
  • Squeeze: bounded × (something going to 0) → 0.
  • 1^∞: e^(lim g(f − 1)). Series: keep terms up to the power in the denominator.

Check yourself

1The limit as x → 0 of sin 5x / x is:
2The limit as x → 2 of (x² − 4)/(x − 2) is:
3The limit as x → 0 of [x] (greatest integer):

Sources

  • NCERT Mathematics Class 11 (Limits and derivatives): topics followed, no text copied
  • JEE Main and JEE Advanced 2026 syllabi: Limit, continuity and differentiability

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.