Module 35: Chemical bonding and molecular structure · Lesson 35.1 · about 36 min
Chemical bonding and molecular structure
Why atoms bond: Lewis structures and formal charge, ionic bonds and the Born-Haber cycle, Fajans rules, bond parameters and resonance, dipole moments, VSEPR shapes, hybridisation, molecular orbital theory with bond order and magnetism, and hydrogen bonding, up to JEE Advanced depth.
Chemistry · Class 11 · about 36 minutes. By the end you will be able to draw a Lewis structure with formal charges, predict any shape and hybridisation, decide whether a molecule is polar, work out bond order and magnetism from molecular orbitals and explain boiling points with hydrogen bonds.
1. Lewis structures and formal charge
Atoms of the main groups tend to reach eight outer electrons (the octet rule). In a Lewis structure, each line is a shared pair, and dots are lone pairs. Steps: count all valence electrons (add one for each negative charge, take one away for each positive), join the atoms with single bonds, complete the outer atoms’ octets, then put leftovers on the central atom and make multiple bonds if it is short.
The octet rule fails in three ways: incomplete octets (BeCl₂ has 4, BF₃ has 6), odd electron molecules (NO, NO₂) and expanded octets in period 3 and beyond (PCl₅ has 10, SF₆ has 12).
Formal charge = valence electrons − lone pair electrons − ½ (bonding electrons). The best structure has formal charges closest to zero, with any negative charge on the more electronegative atom. In O₃, the central O has +1 and one end O has −1.
2. The ionic bond and the Born-Haber cycle
An ionic bond forms when one atom gives electrons to another, then the ions attract. Low ionisation enthalpy of the metal, very negative electron gain enthalpy of the non-metal and a large lattice enthalpy all help. Lattice enthalpy is larger for smaller and more highly charged ions (MgO far above NaCl).
Lattice enthalpy cannot be measured directly, so we use a Born-Haber cycle: the enthalpy of formation equals the sum of sublimation, ionisation, atomisation, electron gain and the energy released when the gaseous ions form the solid (Hess’s law).
Fajans rules tell when an ionic bond gains covalent character: the cation polarises (distorts) the anion’s electron cloud more when the cation is small and highly charged, the anion is large, or the cation has a pseudo noble gas (18 electron) shell like Cu⁺ or Ag⁺. So LiI is more covalent than LiF, AlCl₃ more than NaCl, and CuCl more than NaCl.
3. Bond parameters, resonance and dipole moments
Bond length falls and bond enthalpy rises as bond order rises: C-C 154 pm, C=C 134 pm, C≡C 120 pm. When one Lewis structure is not enough, the real molecule is a resonance hybrid of several. In CO₃²⁻ every C-O bond is the same, with bond order 4/3 (4 bonds shared over 3 positions).
A bond between atoms of different electronegativity is polar. Its dipole moment μ = q × d, measured in debye (1 D = 3.336 × 10⁻³⁰ C m). For a molecule, add the bond dipoles as vectors, including the effect of lone pairs. NH₃ (1.47 D) is far more polar than NF₃ (0.24 D): in NH₃ the lone pair’s dipole points the same way as the N-H bond dipoles; in NF₃ it opposes the N-F dipoles.
4. VSEPR: shapes from electron pairs
Count the electron pairs (bonds as one each, whatever their order, plus lone pairs) round the central atom. The pairs spread out to minimise repulsion; the shape is named from the atoms only. Repulsion order: lone pair-lone pair > lone pair-bond pair > bond pair-bond pair, so lone pairs squeeze bond angles: CH₄ 109.5°, NH₃ 107°, H₂O 104.5°.
- Steric number
- bonded atoms + lone pairs on the central atom; it sets the electron arrangement
- μ
- dipole moment = charge × distance, in debye (D)
- Nb, Na
- electrons in bonding and antibonding molecular orbitals
- Bond order
- (Nb − Na)/2: the number of net bonds between two atoms
- Physical meaning
- Steric number 2, 3, 4, 5, 6 gives sp, sp², sp³, sp³d, sp³d². Lone pairs are fatter than bonds because they are held by one nucleus only, so they need more room.
5. Hybridisation, sigma and pi bonds
Mixing atomic orbitals of one atom gives equal hybrid orbitals pointing in the VSEPR directions. Hybrid orbitals overlap end on to make σ bonds. Unhybridised p orbitals overlap side by side to make π bonds. Every single bond is one σ; a double bond is σ + π; a triple bond σ + 2π. Ethene (sp²) is flat; ethyne (sp) is linear.
Example: in CH₂=CH-C≡N there are 6 σ bonds and 3 π bonds; the carbons are sp², sp², sp.
6. Molecular orbital theory
In MO theory, atomic orbitals combine into bonding orbitals (lower energy, electron density between the nuclei) and antibonding orbitals (marked , higher energy). Filling order for up to 14 electrons: σ1s, σ1s, σ2s, σ2s, π2p (two orbitals), σ2p, π2p, σ*2p. From O₂ onwards (more than 14 electrons) σ2p drops below π2p, because the 2s-2p mixing that pushes it up becomes weak.
Bond order = (Nb − Na)/2. Unpaired electrons make a species paramagnetic (drawn into a magnet). O₂: bond order 2, two unpaired electrons in π*2p, which Lewis structures cannot explain. B₂ is also paramagnetic (two unpaired in π2p). Removing an antibonding electron raises the bond order: O₂⁺ (2.5) > O₂ (2) > O₂⁻ (1.5) > O₂²⁻ (1).
“Removing an electron always weakens a bond.” Only if it comes from a bonding orbital. N₂ → N₂⁺ loses a bonding electron (bond order 3 → 2.5), but O₂ → O₂⁺ loses an antibonding one, so O₂⁺ has the stronger, shorter bond.
7. Hydrogen bonding and beyond
A hydrogen bond forms when H joined to a small, very electronegative atom (F, O or N) is attracted to a lone pair on another such atom. It is much weaker than a covalent bond (roughly 10 to 40 kJ/mol) but much stronger than other attractions between molecules. Intermolecular H-bonds raise boiling points (H₂O 373 K against H₂S 212 K) and make ice less dense than water. Intramolecular H-bonds, inside one molecule such as o-nitrophenol, lower the boiling point and the solubility in water compared with the para isomer, which bonds to its neighbours.
For JEE Advanced: in N(SiH₃)₃ the lone pair of N spreads into empty orbitals of Si (back bonding), so the molecule is planar and a weak base. Diborane B₂H₆ has two three-centre, two-electron B-H-B “banana” bonds, because boron has too few electrons for ordinary bonds.
“A molecule with polar bonds must be polar.” CO₂, BF₃, CH₄, CCl₄, PCl₅ and SF₆ all have polar bonds but zero dipole moment, because their symmetric shapes make the bond dipoles cancel. Always draw the shape first.
- Formal charge = valence − lone pair electrons − ½ bonding electrons; prefer charges near zero.
- Lattice enthalpy grows with charge and shrinks with size; find it from a Born-Haber cycle.
- Fajans: small, highly charged cation and large anion give covalent character.
- Bond order up: shorter, stronger bond. Resonance spreads bond order (CO₃²⁻: 4/3).
- VSEPR: lp-lp > lp-bp > bp-bp; steric number 2 to 6 gives sp to sp³d².
- σ in every bond, π in each extra bond of a multiple bond.
- MO: π2p below σ2p up to N₂; bond order = (Nb − Na)/2; O₂ and B₂ are paramagnetic.
- H-bonds need H on F, O or N; intramolecular H-bonds lower boiling points.
Check yourself
Sources
- IUPAC Gold Book: bond order, dipole moment, hydrogen bond https://goldbook.iupac.org
- Gillespie R. J. and Nyholm R. S. (1957), Inorganic stereochemistry (VSEPR), Quarterly Reviews of the Chemical Society 11, 339
- Experimental bond angles and dipole moments: NIST Computational Chemistry Comparison and Benchmark Database https://cccbdb.nist.gov
- NEET (UG) and JEE Main / JEE Advanced 2026 syllabi: Chemical bonding and molecular structure
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.