All lessons

Module 36: Gases and liquids · Lesson 36.1 · about 34 min

Gases and liquids

Forces between molecules, the gas laws and the ideal gas equation, Dalton's law and gases collected over water, Graham's law, kinetic theory and molecular speeds, real gases with the compressibility factor and the van der Waals equation, critical constants and liquefaction, and the liquid state (vapour pressure, surface tension, viscosity).

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Chemistry · Class 11 · about 34 minutes. By the end you will be able to solve any ideal gas problem, handle mixtures and gases collected over water, compare effusion rates and molecular speeds, explain when and why real gases differ from ideal ones and link the van der Waals constants to liquefaction.

A gas is mostly empty space with molecules racing about. Temperature is just their average kinetic energy, and pressure is their collisions with the walls. Real gases differ from ideal ones only because their molecules have size and attract each other.

1. Forces between molecules

Whether a substance is a gas, liquid or solid depends on a contest between intermolecular attractions (pulling molecules together) and thermal energy (shaking them apart). The attractions, weakest to strongest: London dispersion forces (in every molecule, larger for bigger molecules with more electrons), dipole-dipole forces (polar molecules), dipole-induced dipole forces, and hydrogen bonds (H on F, O or N). These are much weaker than covalent bonds; they are broken when a liquid boils, but the molecules themselves stay whole.

2. The gas laws and the ideal gas equation

Law Held constant Statement
Boyle n, T P ∝ 1/V, so P₁V₁ = P₂V₂
Charles n, P V ∝ T (kelvin), so V₁/T₁ = V₂/T₂
Gay-Lussac n, V P ∝ T (kelvin)
Avogadro P, T V ∝ n

Together they give the ideal gas equation PV = nRT. Since n = m/M, the density of a gas is d = PM/(RT): a heavier gas, a higher pressure or a lower temperature makes it denser. At STP (273 K, 1 atm) one mole occupies 22.4 L.

P, V, T, n
pressure, volume, temperature in kelvin (°C + 273), moles
R
gas constant: 0.0821 L atm K⁻¹ mol⁻¹ = 8.314 J K⁻¹ mol⁻¹
M, d
molar mass (g/mol; in kg/mol inside speed formulas), density
Z
compressibility factor PV/(nRT): 1 for an ideal gas
a, b
van der Waals constants: a for attraction, b for the volume the molecules themselves take up
Physical meaning
PV = nRT says that every gas, whatever its molecules, behaves the same way if the molecules are tiny and do not attract. Temperature in kelvin starts from zero motion, which is why every gas law needs kelvin.

3. Dalton’s law of partial pressures

In a mixture of gases that do not react, each gas pushes as if it were alone: Ptotal = p₁ + p₂ + … The partial pressure of a gas is its mole fraction times the total: p₁ = x₁ Ptotal. A gas collected over water is mixed with water vapour, so pdry gas = Ptotal − (vapour pressure of water at that temperature, the aqueous tension).

4. Graham’s law of diffusion and effusion

At the same temperature and pressure, the rate of effusion (escape through a pinhole) is inversely proportional to the square root of the molar mass: r₁/r₂ = √(M₂/M₁). The time for the same volume to escape goes the other way: t ∝ √M. If the pressures differ, the rate is also proportional to pressure: r ∝ P/√M. Hydrogen effuses 4 times as fast as oxygen (√(32/2) = 4). This principle was used to separate ²³⁵UF₆ from ²³⁸UF₆.

5. Kinetic theory and molecular speeds

The kinetic theory pictures a gas as point molecules in random motion, colliding elastically, with no forces between them. It leads to PV = ⅓ m N urms² and to the result that the average kinetic energy of one mole is (3/2)RT. So temperature measures molecular motion, and all gases at one temperature share the same average kinetic energy.

Not all molecules move at the same speed. The Maxwell distribution gives three typical speeds, all proportional to √(T/M):

ump=2RTMu‾=8RTπMurms=3RTM

They are in the ratio 1 : 1.128 : 1.225. Raising the temperature moves the peak to higher speeds and flattens it (the area under the curve stays 1).

Maxwell distribution for a chosen gas and temperature. The three marked speeds are the most probable (mp), average (avg) and root mean square (rms). The dashed curve is the same gas at 300 K for comparison.

6. Real gases and the van der Waals equation

Real gases follow PV = nRT only at low pressure and high temperature. The compressibility factor Z = PV/(nRT) shows how far off they are. Z < 1: attractions win and the gas is easier to compress. Z > 1: the molecules’ own volume wins. H₂ and He have Z > 1 at room temperature at all pressures because their attractions are so weak.

Van der Waals fixed the ideal equation in two ways: the molecules take up volume nb, and attractions reduce the pressure on the walls by an²/V²:

(P+an2V2)(V−nb)=nRT

A larger a means stronger attractions and easier liquefaction (NH₃ has a big a). A larger b means bigger molecules. At low pressure the a term matters more (Z ≈ 1 − a/(VRT)); at high pressure the b term (Z ≈ 1 + Pb/(RT)). The Boyle temperature TB = a/(Rb) is where a real gas behaves ideally over a range of low pressures.

“A gas with a bigger b is easier to liquefy.” Liquefaction depends on attraction, which is a. The critical temperature Tc = 8a/(27Rb) grows with a; b only measures the size of the molecules.

7. Critical constants and liquefaction

Every gas has a critical temperature Tc above which no pressure can liquefy it. The pressure needed at Tc is the critical pressure Pc, and the molar volume there the critical volume Vc. From the van der Waals equation: Vc = 3b, Pc = a/(27b²), Tc = 8a/(27Rb), and Zc = 3/8 for every van der Waals gas. CO₂ has Tc = 304 K, so it can be liquefied at room temperature by pressure; O₂ (155 K) must first be cooled.

8. The liquid state

Vapour pressure is the pressure of the vapour in equilibrium with its liquid. It rises with temperature. A liquid boils when its vapour pressure equals the outside pressure: at 1 atm the normal boiling point, at 1 bar the standard boiling point (water 99.6 °C). Water boils at a lower temperature on a mountain, and at a higher one in a pressure cooker.

Surface tension (N/m) is the energy needed to increase the surface by one unit area; molecules at the surface are pulled inwards, so drops are round and liquids rise in thin tubes. Viscosity (Pa s) is resistance to flow. Both are larger when attractions are stronger (glycerol, with three OH groups, is very viscous) and both fall as the temperature rises.

  • PV = nRT with T in kelvin; d = PM/(RT); 22.4 L/mol at STP.
  • Dalton: p = x Ptotal; subtract aqueous tension for gas over water.
  • Graham: r ∝ 1/√M (and ∝ P); time for the same volume ∝ √M.
  • Average KE per mole = (3/2)RT, the same for all gases at one T.
  • ump : ū : urms = 1 : 1.128 : 1.225, all ∝ √(T/M).
  • Z < 1 attraction wins, Z > 1 size wins; ideal at low P, high T.
  • Vc = 3b, Pc = a/27b², Tc = 8a/27Rb, Zc = 3/8, TB = a/Rb.
  • Boiling: vapour pressure = outside pressure; surface tension and viscosity fall on heating.

Check yourself

1At the same temperature, which gas has the highest average kinetic energy per molecule?
2For a real gas at low pressure where attractions dominate, the compressibility factor Z is:
3Above its critical temperature, a gas:

Sources

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.