All lessons

Module 37: Chemical thermodynamics · Lesson 37.1 · about 36 min

Chemical thermodynamics

Systems and state functions, the first law with heat and work, work of expansion (reversible, irreversible, adiabatic), enthalpy and ΔH = ΔU + Δn(g)RT, heat capacity and calorimetry, Hess's law and bond enthalpies, entropy and the second and third laws, Gibbs energy, spontaneity and the link ΔG° = −RT ln K.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Chemistry · Class 11 · about 36 minutes. By the end you will be able to apply the first law with the right signs, find work for any expansion, switch between ΔH and ΔU, use Hess’s law and bond enthalpies, calculate entropy changes and decide whether a reaction goes, and at what temperature.

Energy is never lost, only moved around as heat and work (first law). But energy alone does not decide which way a change goes: the total entropy of the universe must rise (second law). Gibbs energy rolls both into one test for a reaction at constant temperature and pressure.

1. Systems, surroundings and state functions

The system is the part we study; everything else is the surroundings. An open system swaps matter and energy, a closed one energy only, an isolated one neither. A state function depends only on the present state, not on how it was reached: U, H, S, G, P, V, T. Heat q and work w are path functions. Extensive properties grow with the amount (mass, V, U, H); intensive ones do not (T, P, density, molar quantities).

2. The first law, heat and work

The first law: ΔU = q + w. We use the IUPAC sign convention: q and w are positive when energy goes into the system. Gas expanding against a constant outside pressure does work w = −PextΔV (negative, because the gas loses energy). Expansion into a vacuum (free expansion) does no work.

For a reversible isothermal expansion of an ideal gas, the outside pressure is always just below the gas pressure, so the gas does the most work possible:

wrev=−2.303nRTlog⁡V2V1=−2.303nRTlog⁡P1P2

For an ideal gas at constant T, ΔU = 0, so q = −w.

In an adiabatic process q = 0, so w = ΔU = nCvΔT: a gas that expands adiabatically cools. For a reversible adiabatic change, PVγ and TVγ−1 stay constant (γ = Cp/Cv: 5/3 for a monatomic gas, 7/5 for a diatomic one).

3. Enthalpy and heat capacity

Most reactions happen at constant pressure, so we use enthalpy H = U + PV. At constant pressure, qp = ΔH; at constant volume, qv = ΔU. For reactions with gases:

ΔH=ΔU+ΔngRT
U, H
internal energy and enthalpy (H = U + PV)
q, w
heat and work, positive when they flow into the system
Δng
moles of gaseous products − moles of gaseous reactants
S, G
entropy (J/K) and Gibbs energy (G = H − TS)
Cp, Cv
molar heat capacities at constant pressure and volume; Cp − Cv = R for an ideal gas
Physical meaning
ΔH is ΔU plus the work needed to push the atmosphere back. If a reaction makes gas, ΔH is bigger than ΔU by RT per extra mole of gas.

Calorimetry. A bomb calorimeter (sealed, constant volume) measures ΔU; a coffee cup calorimeter (open, constant pressure) measures ΔH. Heat q = C ΔT, where C is the heat capacity of the calorimeter and its contents.

4. Hess’s law and kinds of enthalpy

Because H is a state function, the enthalpy change for a reaction is the same whether it happens in one step or many (Hess’s law). So reaction equations can be added like algebra, with their ΔH values. Two very useful forms:

  • From enthalpies of formation: ΔH°r = Σ ΔH°f(products) − Σ ΔH°f(reactants). Elements in their standard states have ΔH°f = 0.
  • From bond enthalpies (gases only): ΔHr = Σ (bonds broken) − Σ (bonds formed).

Other named enthalpies: combustion (1 mol burnt completely in O₂, always negative), atomisation, sublimation, neutralisation (strong acid and strong base: −57.1 kJ per mol of water, less for weak ones because some energy goes into ionising them), and solution. The Born-Haber cycle is Hess’s law applied to forming an ionic solid.

5. Entropy and the second law

Entropy S measures how many ways the energy and particles of a system can be arranged. It rises from solid to liquid to gas, when gas moles increase, on mixing and on heating. The second law: in any spontaneous change, the total entropy of system plus surroundings increases.

  • Reversible heat flow: ΔS = qrev/T.
  • Phase change at its transition temperature: ΔS = ΔH/T (for boiling of many liquids about 85 to 88 J K⁻¹ mol⁻¹, Trouton’s rule).
  • Surroundings at temperature T absorbing the reaction’s heat: ΔSsurr = −ΔHsys/T.
  • Ideal gas expanding at constant T: ΔS = 2.303 nR log(V₂/V₁), the same whether the path is reversible or not, because S is a state function.

The third law: the entropy of a perfect crystal at 0 K is zero. That gives absolute entropies, unlike H.

“Exothermic reactions are always spontaneous.” Many are, but dissolving ammonium nitrate in water is endothermic and still happens, because the entropy gain wins. And water freezing is exothermic, yet it does not happen at 25 °C. Spontaneity needs ΔG, not ΔH alone.

6. Gibbs energy and spontaneity

At constant T and P, the test for spontaneity is the Gibbs energy change:

ΔG=ΔH−TΔS

ΔG < 0 spontaneous, ΔG = 0 at equilibrium, ΔG > 0 not spontaneous (the reverse goes). −ΔG is also the maximum useful (non-expansion) work the reaction can do.

ΔH ΔS Spontaneous when
− + always
+ − never
− − low T (below ΔH/ΔS)
+ + high T (above ΔH/ΔS)
ΔG against T is a straight line: it starts at ΔH and slopes down by ΔS for every kelvin. Below the axis (shaded) the reaction is spontaneous; the crossing point is T = ΔH/ΔS.

Gibbs energy and equilibrium. The standard Gibbs energy change fixes the equilibrium constant: ΔG° = −RT ln K = −2.303 RT log K. A negative ΔG° means K > 1 (products favoured). At 298 K, every 5.7 kJ/mol of ΔG° changes K by a factor of 10.

“ΔG° tells you whether a reaction happens.” ΔG° is for everything at standard concentrations. The real driving force is ΔG = ΔG° + RT ln Q, which depends on how much product and reactant are present. A reaction with positive ΔG° still makes some product, just with K < 1.

  • ΔU = q + w, with q and w positive into the system; w = −PextΔV; free expansion does no work.
  • Reversible isothermal: w = −2.303 nRT log(V₂/V₁); ideal gas ΔU = 0 at constant T.
  • Adiabatic: q = 0, w = nCvΔT; PVγ constant if reversible.
  • qp = ΔH, qv = ΔU; ΔH = ΔU + ΔngRT; Cp − Cv = R.
  • Hess: ΔH° = ΣΔH°f(products) − ΣΔH°f(reactants) = Σ bonds broken − Σ bonds formed.
  • ΔS = qrev/T; phase change ΔS = ΔH/T; ΔSsurr = −ΔH/T.
  • ΔG = ΔH − TΔS; crossover T = ΔH/ΔS; ΔG° = −2.303 RT log K.

Check yourself

1For CaCO₃(s) → CaO(s) + CO₂(g) at constant pressure, how do ΔH and ΔU compare?
2A reaction with ΔH > 0 and ΔS > 0 is spontaneous:
3Which of these is not a state function?

Sources

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.