All lessons

Module 75: Applications of derivatives · Lesson 75.2 · about 27 min

Applications of derivatives: question types and traps

Every way entrance exams ask about applications of derivatives: related rates, tangents and normals, angle between curves, monotonicity with a parameter, local and global extrema, optimisation of areas and volumes, approximation, mean value theorems, number of real roots and inequalities, each with a method and its trap.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Maths · Class 12 · about 27 minutes. Read Applications of derivatives first. Here are the question types, worked examples and practice.

Every application question is one of three moves: differentiate a relation in time (rates), read the slope (tangents, monotonicity), or set the slope to zero (extremes). The hard part is setting up the right function in one variable; the calculus is short.

The question types

1. Related rates. Ladders, cones, shadows, balloons. Trap: substituting numbers before differentiating.
2. Tangents and normals. Equations, intercepts, tangents parallel to a line, from an outside point, for parametric curves. Trap: using the normal slope for the tangent.
3. Angle between curves. Find the meeting point, both slopes, then tan θ. Trap: missing a second meeting point.
4. Monotonicity. Intervals of increase; parameter so f is monotonic everywhere. Method: f′ ≥ 0 for all x, often a discriminant condition.
5. Local and global extrema. First and second derivative tests; compare ends of an interval. Trap: forgetting the endpoints or points where f′ does not exist.
6. Optimisation. Boxes, cylinders in spheres, least distance from a point to a curve, fencing. Method: one variable, its interval, f′ = 0.
7. Approximation and errors. f(x + Δx) ≈ f(x) + f′(x)Δx; percentage errors. Trap: degrees instead of radians in trig approximations.
8. Roots and inequalities. Rolle, Lagrange, number of real roots, comparing aᵇ and bᵃ. Method: study a helper function g and its sign.

Worked examples

Example 1 (level 3, related rates with a cone). Water pours at 4 cm³/s into an inverted cone with height 2 × radius. How fast does the water level rise when it is 4 cm deep? Solution. r = h/2, so V = (1/3)π(h/2)²h = πh³/12. dV/dt = (πh²/4) dh/dt. 4 = (π × 16/4) dh/dt, so dh/dt = 1/π cm/s.

Example 2 (level 4, least distance). Find the points on y² = 4x nearest to (5, 0). Solution. Take the point (t², 2t). Square of distance D = (t² − 5)² + 4t². dD/dt = 4t(t² − 5) + 8t = 4t(t² − 3) = 0 at t = 0, ±√3. D(0) = 25, D(±√3) = 4 + 12 = 16. Nearest points (3, ±2√3), distance 4. Check: the normal at those points passes through (5, 0).

Example 3 (level 4, global extremes). Find the greatest value of f(x) = 2x³ − 9x² + 12x on [0, 3]. Solution. f′ = 6(x − 1)(x − 2): critical points 1 and 2. f(0) = 0, f(1) = 5, f(2) = 4, f(3) = 9. Greatest value 9, at the end x = 3, not at the local maximum x = 1.

Example 4 (level 5, number of roots). For which k does x³ − 3x + k = 0 have three distinct real roots? Solution. f′ = 3x² − 3 = 0 at x = ±1. f(−1) = 2 + k, f(1) = k − 2. Three roots need opposite signs: (k + 2)(k − 2) < 0, so −2 < k < 2.

Example 5 (level 5, inequality). Show that tan x > x for 0 < x < π/2. Solution. g(x) = tan x − x has g(0) = 0 and g′(x) = sec²x − 1 = tan²x > 0 on (0, π/2). So g is increasing and g(x) > g(0) = 0. tan x > x.

“The local maximum is the largest value.” A local maximum is only larger than its neighbours. On a closed interval, the global maximum may sit at an endpoint (Example 3), and a function can have a local maximum that is smaller than a local minimum elsewhere, like x + 1/x.

Critical point
f′ = 0 or f′ undefined
Helper function
g = (left side) − (right side) in an inequality; show g stays positive
Parametric point
(at², 2at) on y² = 4ax, (a cos θ, b sin θ) on an ellipse: one variable instead of two
Physical meaning
At a maximum the quantity has stopped rising and not yet started falling, so its rate of change is zero for an instant.

Practise

  • Rates: differentiate first, substitute later; use similar triangles to remove extra variables.
  • Angle between curves: tan θ = |(m₁ − m₂)/(1 + m₁m₂)| at each meeting point.
  • Monotonic for all x: f′ ≥ 0 everywhere, often a discriminant ≤ 0.
  • Global extremes: compare critical points and the ends of the interval.
  • Least distance to a curve: use a parametric point and minimise the square of the distance.
  • Cubic x³ + px + k has three real roots when f(max)·f(min) < 0.
  • Inequalities: helper function, value at the start, sign of its derivative.

Check yourself

1The least value of f(x) = x² − 4x + 7 on [0, 5] is:
2The curves y = x² and x = y² cut at (1, 1) at an angle θ with tan θ =:
3f(x) = x³ + kx is increasing for every real x when:

Sources

  • JEE Main and JEE Advanced 2026 syllabi: Differential calculus; question patterns studied from published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.