All lessons

Module 5: Laws of motion and friction · Lesson 5.2 · about 30 min

Laws of motion and friction: question types and traps

Every way entrance exams ask about forces: free-body diagrams, pulleys and constraints, lifts, pseudo forces, static and kinetic friction, blocks on blocks, impulse and recoil, banked roads, conical pendulums and the vertical circle, each with a method and its trap.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 11 · about 30 minutes. Read the lesson Laws of motion and friction first. Here you meet every question type, with a worked example and the trap, then practise.

Each force question is solved in three moves: choose the body (or system), draw only the real forces on it, and write F = ma along well-chosen axes. Friction questions add one check first: does it slip or not?

The ten question types

1. Newton's laws and inertial frames. Statement and assertion questions. Trap: thinking action-reaction pairs cancel, or that a moving body needs a force to keep moving.
2. Impulse and momentum. Impulse = area under F-t = change in momentum (with direction). Trap: a rebound doubles the change.
3. Recoil and momentum conservation. Total momentum before = after. Trap: the bullet's speed given relative to the gun.
4. Pulleys and constraints. One equation per body plus the string-length rule. Trap: a movable pulley halves the block's acceleration and doubles the tension it carries.
5. Contact forces and springs. System first for a, then one block for the contact force. Trap: a spring force cannot change at the instant a string is cut; a string force can.
6. Lifts and pseudo forces. N = m(g + a); pendulum in a car tan θ = a/g. Trap: slowing down while going up means a points down.
7. Does it slip? Find the friction needed and compare with μs N. If needed is smaller, friction equals needed. Trap: writing f = μN for a body at rest.
8. Blocks on blocks and on slopes. Assume they move together, find the friction needed on the top block, check against μN. Trap: the top block's greatest acceleration is μg, set by friction alone.
9. Circular motion on roads. Flat: v = √(μrg). Banked: tan θ = v²/rg. Trap: using N = mg on a banked road; it is larger.
10. Vertical circle. Top: T + mg = mv²/r. Energy links top and bottom. Trap: a rod needs only zero speed at the top, a string needs √(gr).

Worked examples

Example 1 (level 3, movable pulley). Block A (4 kg) on a smooth table is tied by a string that passes over a fixed pulley at the edge, then down round a light movable pulley carrying block B (6 kg), and up to a fixed hook. Find B’s acceleration. (g = 10 m/s²)

Solution. If A moves x, B falls x/2, so aB=aA/2. A: T=4aA. B: 60−2T=6aB. Put aA=2aB: 60−16aB=6aB, so a_B = 30/11 ≈ 2.73 m/s² (T ≈ 21.8 N). Trap: taking equal accelerations.

Example 2 (level 4, block on block). A 2 kg block sits on a 4 kg block on a smooth floor; μ between them is 0.3. A force of 24 N pulls the lower block. Find both accelerations. (g = 10 m/s²)

Solution. Together: a = 24/6 = 4 m/s², which would need friction 2 × 4 = 8 N on the top block. The limit is 0.3 × 20 = 6 N, so they slip. Top: a = 6/2 = 3 m/s². Bottom: (24 − 6)/4 = 4.5 m/s².

Example 3 (level 4, least force). What is the least force needed to drag a 10 kg box on a floor with μ = 0.75, and at what angle? (g = 10 m/s²)

Solution. Least force =μmg/1+μ2=75/1.25 = 60 N, pulling at tan⁡α=0.75, so α ≈ 37° above the horizontal. Pulling horizontally needs 75 N.

Example 4 (level 5, vertical circle). A 0.5 kg stone on a 1 m string just completes a vertical circle. Find the tension when the string is horizontal. (g = 10 m/s²)

Solution. At the bottom v2=5gr=50. At the side it has risen r: v2=50−2×10×1=30. Horizontal string: only tension points to the centre, T=mv2/r=0.5×30 = 15 N (= 3mg).

“On an incline, N = mg.” Only on level ground. On a slope N = mg cos θ, pulling up at an angle lowers it, pushing down raises it, and on a banked road N = mg/cos θ (larger). Always find N from the perpendicular direction first.

System or one body
use the whole system to find a common acceleration; use one body to find a force between bodies
Slip test
friction needed ≤ μs N means no slipping and f = needed; otherwise f = μk N
Physical meaning
Internal forces (tension inside the system, friction between blocks) cancel only when you treat the whole system as one body.

Practise

The set climbs from level 1 to level 5 and includes numericals, assertion-reason, statements, matching lists, multi-correct and passage questions. Templates give new numbers each time.

  • Ten types: laws and frames, impulse, recoil, pulleys, contact and springs, lifts and pseudo forces, slip test, blocks on blocks, roads, vertical circle.
  • Always check whether a body slips before writing f = μN.
  • Constraints: a movable pulley halves the acceleration.
  • Top block’s greatest acceleration is μg; above that they slip.
  • Vertical circle on a string: √(gr) at top, √(5gr) at bottom, tension 3mg at the side.

Check yourself

1A 2 kg block on a table (μs = 0.5) is pushed sideways with 6 N. The friction on it is: (g = 10 m/s²)
2A ball of 0.2 kg hits a wall at 10 m/s and rebounds at 10 m/s. The impulse on it has size:
3A bob hangs from the roof of a car accelerating at g/√3. The string makes an angle with the vertical of:

Sources

  • JEE Main, JEE Advanced 2026 and NEET (UG) syllabi: Laws of motion; question patterns studied from the exams' published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.