All lessons

Module 10: Elasticity of solids · Lesson 10.2 · about 26 min

Elasticity of solids: question types and traps

Every way entrance exams ask about elasticity: stress, strain and Young's modulus, ratio questions, bulk and shear moduli, Poisson's ratio, stress-strain graphs, elastic energy, wires in series and parallel, own weight, thermal stress, rotating rods and sudden loads, each with a method and its trap.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 11 · about 26 minutes. Read the lesson Elasticity of solids first. Here you meet every question type, with a worked example and the trap, then practise.

Elasticity questions reward one habit: write ΔL = FL/(AY) (or its cousins for B and η) and read off what changes. Then treat every wire as a spring of k = YA/L, and the harder problems become spring problems.

The ten question types

1. Direct Y = FL/(AΔL). Trap: diameter instead of radius in A, or mm not converted to m.
2. Ratio questions. ΔL ∝ FL/(d²Y). Same volume, twice the length: area halves, so ΔL becomes 4 times. Trap: missing the area change when the volume is fixed.
3. Bulk and shear. ΔV/V = ΔP/B; shear angle = (F/A)/η. Compression at depth uses ΔP = ρgh.
4. Poisson's ratio. Change in diameter or volume of a stretched wire; limits −1 to 0.5. Trap: sign of the sideways strain.
5. Stress-strain graphs. Steeper line = larger Y; longer plastic region = more ductile; loop area = heat lost.
6. Elastic energy. ½FΔL, ½ stress × strain × volume. Trap: using FΔL (that is the work by a constant load, twice the stored energy).
7. Wires in series and parallel. k = YA/L. Two wires holding a rod level: equal extension means equal FL/(AY).
8. Own weight and accelerating wires. Own weight: ρgL²/2Y. In a lift accelerating up at a: tension m(g + a). Trap: forgetting the wire's own weight adds half to the extension, not all.
9. Thermal stress. YαΔT, force YAαΔT; with a small gap, only the part beyond the gap is squeezed.
10. Rotating bodies and composites. Tension in a spinning rod or ring; composite rods share force in series or extension in parallel.

Worked examples

Example 1 (level 3, same volume). A wire is drawn out to twice its length, keeping its volume fixed. By what factor does its extension under the same load change?

Solution. Volume fixed: L doubles, so A halves. ΔL ∝ L/A, so ΔL becomes 2/(1/2) = 4 times. Trap: answering 2.

Example 2 (level 4, rod on two wires). A light rod 1 m long hangs level from two wires at its ends: steel (Y = 2 × 10¹¹ Pa) and brass (Y = 1 × 10¹¹ Pa), same length and same area. Where on the rod should a load hang so that it stays level?

Solution. Equal extensions need Fs/Ys=Fb/Yb, so Fs=2Fb. Torques about the load point: Fsx=Fb(1−x), so 2x = 1 − x and x = 1/3 m from the steel wire.

Example 3 (level 4, thermal stress with a gap). A 2 m steel rod (α = 1.2 × 10⁻⁵ /°C, Y = 2 × 10¹¹ Pa) is fixed at one end with a 0.6 mm gap before a rigid wall at the other. It is heated by 50 °C. Find the stress in it.

Solution. Free expansion = 2 × 1.2 × 10⁻⁵ × 50 = 1.2 mm. The gap takes 0.6 mm; the wall stops the other 0.6 mm. Strain = 0.6 mm/2 m = 3 × 10⁻⁴. Stress = 6 × 10⁷ Pa.

Example 4 (level 5, rotating rod). A uniform rod of length L, density ρ and Young’s modulus Y spins about one end at ω in a horizontal plane. Find its total extension.

Solution. Tension at distance x from the axis: T(x)=12ρAω2(L2−x2). Each piece dx stretches Tdx/(AY). Total: ΔL=ρω22Y∫0L(L2−x2)dx=ρω2L33Y.

“Young’s modulus of a wire changes if you change its length or thickness.” Y belongs to the material. Change the size and the extension changes, but Y stays the same. Only temperature (Y falls slightly as metals warm) and impurities change it.

Spring view
k = YA/L for stretching; series wires add 1/k, parallel wires add k
Varying tension
when tension changes along a wire, add up T dx/(AY)
Physical meaning
Stored energy is half of load × extension because the load grows from zero while the wire stretches.

Practise

The set climbs from level 1 to level 5 and includes numericals, assertion-reason, statements, matching lists, multi-correct and passage questions. Templates give new numbers each time.

  • Ten types: direct Y, ratios, bulk and shear, Poisson, graphs, energy, series and parallel, own weight, thermal stress, rotating and composite.
  • Same volume and twice the length: four times the extension.
  • Level rod on two wires: equal F/(Y A/L), then torques.
  • Thermal stress with a gap: only the expansion beyond the gap is strain.
  • Spinning rod: ΔL = ρω²L³/3Y.

Check yourself

1A wire stretches 1 mm under a load. The same load on a wire of the same material, twice as long and twice the diameter, stretches it by:
2The energy stored per unit volume in a stretched wire is:
3The bulk modulus of an ideal gas compressed slowly at constant temperature equals:

Sources

  • JEE Main, JEE Advanced 2026 and NEET (UG) syllabi: Properties of solids; question patterns studied from the exams' published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.