All lessons

Module 39: Redox reactions · Lesson 39.2 · about 25 min

Redox reactions: question types and traps

Every way entrance exams ask about redox: oxidation numbers (average, peroxide and structure cases), oxidising and reducing agents, disproportionation, balancing in acid and base, n-factor in different media, equivalent weight, titrations, iodometry and the electrochemical series, each with a method and its trap. Then practise.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Chemistry · Class 11 · about 25 minutes. Read Redox reactions first. Here are the question types, worked examples and practice.

Redox questions come down to counting electrons. Count them with oxidation numbers, make the electrons lost equal the electrons gained, and every balancing, n-factor and titration question falls out of that one equality.

The question types

1. Oxidation numbers. Rules in priority order; sum = charge. Trap: peroxides and superoxides; CrO₅, H₂SO₅ and K₂S₂O₈ hide O-O links.
2. Average against structure. Fe₃O₄ +8/3; S₄O₆²⁻ +2.5 (really +5 and 0); C₃O₂ +4/3. Trap: a fraction is a sign of an average.
3. Oxidising and reducing agents. Highest state only oxidises; lowest only reduces; middle can do both. Trap: the oxidising agent is the one reduced.
4. Types of reaction. Disproportionation, comproportionation, displacement, intramolecular. Trap: 2KClO₃ → 2KCl + 3O₂ is intramolecular, not disproportionation (two elements change).
5. Balancing in acid and base. Ion-electron method. Trap: in base, add OH⁻ to both sides after balancing with H⁺.
6. n-factor. Total ON change per formula unit. Trap: count both changing elements (FeC₂O₄ = 3); medium for KMnO₄.
7. Equivalent weight and normality. E = M/n; N = M × n. Trap: hydrated salts use the full molar mass.
8. Titrations and iodometry. Equivalents equal. Trap: in iodometry the thiosulfate counts the I₂, and 1 mol I₂ = 2 equivalents.
9. Electrochemical series. Higher E° reduced; E°cell = cathode − anode. Trap: do not multiply E° by coefficients.

Worked examples

Example 1 (level 3, balancing in base). Balance MnO₄⁻ + I⁻ → MnO₂ + I₂ in basic solution. Solution. Reduction: MnO₄⁻ + 4H⁺ + 3e⁻ → MnO₂ + 2H₂O. Oxidation: 2I⁻ → I₂ + 2e⁻. Electrons: ×2 and ×3: 2MnO₄⁻ + 6I⁻ + 8H⁺ → 2MnO₂ + 3I₂ + 4H₂O. Add 8OH⁻ to both sides and cancel water: 2MnO₄⁻ + 6I⁻ + 4H₂O → 2MnO₂ + 3I₂ + 8OH⁻.

Example 2 (level 4, iodometry). 0.5 g of a bleaching sample is treated with excess KI in acid; the I₂ freed needs 20 mL of 0.1 M Na₂S₂O₃. Find the mass of available chlorine (each Cl₂ frees one I₂). Solution. Thiosulfate = 2 mmol, so I₂ = 1 mmol, so Cl₂ = 1 mmol = 71 mg. Available chlorine = 71/500 × 100 = 14.2%.

Example 3 (level 4, mixture titration). 25 mL of a solution with both Fe²⁺ and C₂O₄²⁻ (as FeC₂O₄) needs 30 mL of 0.02 M KMnO₄ in acid. Find the molarity of FeC₂O₄. Solution. Equivalents of MnO₄⁻ = 30 × 0.02 × 5 = 3 meq. FeC₂O₄ has n = 3, so 25 × M × 3 = 3, M = 0.04 M.

Example 4 (level 5, n-factor in disproportionation). Find the equivalent weight of Cl₂ in Cl₂ → Cl⁻ + ClO₃⁻ (hot alkali). Solution. Balanced: 3Cl₂ → 5Cl⁻ + ClO₃⁻ (5 Cl gain 1 e⁻ each, 1 Cl loses 5). 3 mol Cl₂ transfer 5 mol electrons, so n = 5/3 per Cl₂. E = 71 ÷ (5/3) = 42.6.

“Oxygen is always −2 and hydrogen always +1.” These are the usual values, but the rules have a priority order. In NaH, hydrogen is −1 because Na must be +1. In OF₂, oxygen is +2 because fluorine must be −1. In Na₂O₂, oxygen is −1.

meq
milliequivalents = N × V(mL) = M × n × V(mL)
Available chlorine
mass % of Cl₂ a bleaching sample can release
Physical meaning
One equivalent of anything redox-active carries one mole of electrons; titration simply counts electrons.

Practise

  • A fractional ON is an average; check the structure.
  • Highest state: only oxidant; lowest: only reductant; intermediate: both.
  • In base: balance with H⁺, then add equal OH⁻ to both sides.
  • n-factor counts every element that changes (FeC₂O₄ 3).
  • Iodometry: 1 I₂ = 2 S₂O₃²⁻ = 2 equivalents.
  • E° does not scale with coefficients.

Check yourself

1The average oxidation number of S in Na₂S₄O₆ is:
2Which cannot act as both oxidising and reducing agent?
3The equivalent weight of FeC₂O₄ (M) when it is oxidised by KMnO₄ in acid is:

Sources

  • JEE Main, JEE Advanced 2026 and NEET (UG) syllabi: Redox reactions; question patterns studied from published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.