All lessons

Module 31: Experimental skills and practical physics · Lesson 31.2 · about 26 min

Experimental skills and practical physics: question types and traps

Every way entrance exams ask about practical physics: least counts and zero errors, significant figures and error in a result, choosing and reading graphs, pendulum, Young's modulus, capillary, viscosity and calorimetry set-ups, resonance tube end correction, metre bridge and galvanometer methods, optics benches and diode characteristics, each with a method and its trap.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 12 · about 26 minutes. Read the lesson Experimental skills and practical physics first. Here you meet every question type, with the method and the trap, then practise.

Practical questions test judgement more than memory: which reading to trust, which graph to draw, which error matters and how to remove a fixed one. For each experiment ask "what is hard to measure here?" and the answer usually follows.

The ten question types

1. Least count and readings. Vernier LC = 1 MSD − 1 VSD; screw gauge LC = pitch/divisions. Trap: adding the zero error instead of subtracting it.
2. Significant figures. Products keep the fewest significant figures; sums keep the fewest decimal places. Trap: quoting a calculator result to eight figures.
3. Error in a result. Fractional errors add, each times its power; constants have no error. Trap: letting a negative power reduce the error.
4. Choosing a graph. Linearise: T² vs L, 1/v vs 1/u, log-log for power laws (slope = power). Trap: reading g from the intercept instead of the slope.
5. Pendulum and mechanics set-ups. Effective length to the bob's centre; Searle's dominant error 2Δr/r; terminal velocity only after the ball stops accelerating. Trap: timing a single swing.
6. Capillary and viscosity. h ∝ 1/r; η from v_t ∝ r². Trap: using the outer radius of the capillary tube.
7. Calorimetry and sound. Heat balance with the calorimeter's own heat capacity; resonance tube e = (l₂ − 3l₁)/2. Trap: v = 4fl₁ ignores the end correction; use 2f(l₂ − l₁).
8. Metre bridge and galvanometer. X = S l/(100 − l), swap and average; half deflection G = RS/(R − S). Trap: using l from the wrong end.
9. Optics bench. Index error correction (bench reading versus true distance), u-v graphs, i-δ curve, travelling microscope μ = real/apparent. Trap: forgetting the index correction on every distance.
10. Diode and Zener curves. Forward knee about 0.7 V (Si), reverse microamperes, Zener breakdown flat. Trap: using a milliammeter for the reverse current (too coarse).

Worked examples

Example 1 (level 3, vernier). A vernier has 20 divisions equal to 19 main divisions of 1 mm. The main scale reads 32 mm and the 7th vernier line coincides. There is a zero error of −0.10 mm. Find the length.

Solution. LC = 1 − 19/20 = 0.05 mm. Reading = 32 + 7 × 0.05 = 32.35 mm. True = 32.35 − (−0.10) = 32.45 mm.

Example 2 (level 4, error in g). L = 100.0 cm (least count 1 mm) and the time for 20 swings is 40.0 s (least count 0.1 s). Find the percentage error in g.

Solution. ΔL/L = 0.1/100 = 0.1%. The period error comes from the total time: ΔT/T = 0.1/40 = 0.25%. g ∝ L/T²: 0.1% + 2 × 0.25% = 0.6%. Timing 20 swings, not one, is what made the period error small.

Example 3 (level 4, resonance tube). With a 512 Hz fork, resonance occurs at 15.5 cm and 49.5 cm. Find the speed of sound and the end correction.

Solution. v = 2 × 512 × (0.495 − 0.155) = 2 × 512 × 0.34 = 348 m/s. e = (49.5 − 3 × 15.5)/2 = (49.5 − 46.5)/2 = 1.5 cm.

Example 4 (level 5, metre bridge end correction). With X in the left gap and 10 Ω in the right, balance is at 40.0 cm. Swapping them, balance is at 59.0 cm. Find X, allowing for end corrections.

Solution. First reading: X = 10 × 40/60 = 6.67 Ω. Second: X is now on the right, with 100 − 59 = 41 cm of wire on its side, so X = 10 × 41/59 = 6.95 Ω. Without end resistance the two would agree; the difference shows it is there. Averaging the lengths on X’s side, l = (40 + 41)/2 = 40.5 cm, cancels its first-order effect: X ≈ 10 × 40.5/59.5 ≈ 6.81 Ω.

“A more precise instrument always gives a more accurate result.” Precision is how finely you can read; accuracy is how close you are to the true value. A finely divided screw gauge with an uncorrected zero error is precise but inaccurate.

Random error
scatters readings both ways; reduced by repeating and averaging
Systematic error
shifts every reading the same way (zero error, end correction); removed only by correction or clever design
Physical meaning
A good experiment is designed so the hardest-to-measure quantity is made as large as possible: many swings for a period, a long wire for a small extension.

Practise

The set climbs from level 1 to level 5 and includes numericals, assertion-reason, statements, matching lists, multi-correct and passage questions. Templates give new numbers each time.

  • Ten types: least counts, significant figures, error in a result, graphs, mechanics set-ups, capillary and viscosity, heat and sound, bridges and meters, optics bench, diode curves.
  • True value = reading − zero error.
  • Time many oscillations: the error in T falls with the number timed.
  • Resonance tube: v = 2f(l₂ − l₁), e = (l₂ − 3l₁)/2.
  • Metre bridge: swap and average; balance near the middle.
  • Averaging removes random error, never systematic error.

Check yourself

1A screw gauge reads −0.03 mm with the jaws closed. A wire then gives a reading of 1.47 mm. The diameter is:
2In Searle's experiment, which measurement needs the most care?
3In a metre bridge, the balance point is best kept near the middle of the wire because:

Sources

  • JEE Main, JEE Advanced 2026 and NEET (UG) syllabi: Experimental skills; question patterns studied from the exams' published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.