Module 18: Electric potential and capacitors · Lesson 18.1 · about 34 min
Electric potential and capacitors
Potential and potential energy of charges, potential of shells, spheres and rings, equipotentials and E = −dV/dr, conductors, capacitance, series and parallel combinations, dielectrics and slabs, energy stored and lost on sharing, and RC charging, up to JEE Advanced level.
Physics · Class 12 · about 34 minutes. By the end you will be able to find the potential of any set of charges, move between E and V, and solve capacitor circuits with dielectrics, charge sharing, energy and RC timing.
1. Potential and potential energy
The potential at a point is the work done per unit charge to bring a small positive charge from infinity to that point, slowly: , in volts (J/C). For a point charge, , with sign. Potential is a scalar: for many charges just add the numbers, no angles.
- Potential energy of two charges: . For a group, add over every pair once.
- Work by an outside agent to move q from A to B: . Work does not depend on the path.
- Electron volt: an electron moved through 1 V gains 1 eV = 1.6 × 10⁻¹⁹ J.
“Where the field is zero, the potential is zero.” No. Midway between two equal positive charges, E = 0 but V = 2kq/(d/2), not zero. Field is the slope of V, not V itself. The reverse also holds: midway between +q and −q, V = 0 but E is not.
2. Potential of charged bodies
| Body | Potential |
|---|---|
| Ring (charge Q, radius R), on axis at x | ; at the centre kQ/R |
| Thin shell or conducting sphere | kQ/r outside; kQ/R everywhere inside |
| Solid sphere, uniform charge | inside; at the centre 1.5 × surface value |
| Dipole at distance r, angle θ | ; zero on the equatorial line |
3. Field from potential, equipotentials
The field is the negative slope of the potential: , or in components . In a uniform field, .
Equipotential surfaces join points at the same potential. They are always perpendicular to field lines, and no work is done moving a charge along one. Around a point charge they are spheres; in a uniform field they are flat planes. A conductor’s whole surface (and inside) is one equipotential.
When two charged spheres are joined by a wire, charge flows until their potentials match: , so . The smaller sphere has the larger surface density. That is why charge crowds at sharp points and leaks away there (corona discharge, lightning conductors).
4. Capacitance
A capacitor is two conductors with equal and opposite charge. Its capacitance (farad) depends only on shape, size and the material between.
- A
- area of one plate (m²)
- d
- gap between the plates (m)
- a, b
- inner and outer radii of spherical or cylindrical conductors
- K
- dielectric constant of a filling material; filling the whole gap multiplies C by K
- Physical meaning
- A bigger area holds more charge for the same voltage; a smaller gap makes each charge pull harder on its partner, so less voltage is needed for the same charge.
Combinations. Parallel: (same V, charges add). Series: (same Q, voltages add). For two in series, , and the smaller capacitor takes the larger voltage.
5. Dielectrics and slabs
A dielectric’s molecules polarise and set up a small opposite field inside it, cutting the field to E/K. A slab of thickness t and constant K in a gap d acts like an air gap of only t/K:
A metal slab is the case K → ∞: . Try it here, and compare battery connected with battery removed.
| Change | Battery connected (V fixed) | Battery removed (Q fixed) |
|---|---|---|
| Insert dielectric K | C, Q, U all × K; E same | C × K; V, E, U ÷ K |
| Double the gap | C ÷ 2, Q ÷ 2, U ÷ 2, E ÷ 2 | C ÷ 2, V × 2, U × 2, E same |
A slab partly across the plate area (side by side) makes parallel capacitors; a slab partly through the gap (layered) makes series capacitors.
6. Energy stored, energy lost
The energy lives in the field between the plates. The plates attract each other with , half of QE, because each plate feels only the other plate’s field.
Charge sharing. Join a capacitor C₁ at V₁ to C₂ at V₂. Charge is conserved, the common voltage is , and energy is always lost:
“A battery that charges a capacitor stores all its work in it.” The battery does work QV, but only ½QV ends up in the capacitor. The other half is lost as heat in the wires, however small their resistance.
7. Charging and discharging through a resistor
With a resistor R in series, charge does not appear at once. Charging: , current . Discharging: . The time constant τ = RC is the time to reach 63% of the final charge (or fall to 37%). After about 5τ the job is done. In a DC circuit after a long time, a capacitor carries no current, so treat it as a gap.
Worked example (level 4). A 2 µF capacitor at 100 V is connected across an uncharged 3 µF capacitor. Common voltage = 200/5 = 40 V. Loss = (2 × 3)/(2 × 5) × 100² µJ = 6000 µJ = 6 mJ. Check: before ½ × 2 × 10⁴ = 10 mJ; after ½ × 5 × 1600 = 4 mJ. ✓
- V = kq/r (scalar, add with signs); U = kq₁q₂/r for each pair; W = q ΔV, path does not matter.
- E = −dV/dr; equipotentials are perpendicular to field lines; a conductor is one equipotential.
- Shell: kQ/R inside; solid sphere centre 1.5 kQ/R; ring axis kQ/√(R² + x²).
- C = ε₀A/d; sphere 4πε₀R; parallel adds C, series adds 1/C.
- Slab: C = ε₀A/(d − t + t/K); metal slab K → ∞.
- Battery on: V fixed. Battery off: Q fixed. Work out every change from that.
- U = Q²/2C = ½CV²; sharing loses C₁C₂(V₁ − V₂)²/[2(C₁ + C₂)]; plate force Q²/(2ε₀A).
- RC: q = CV(1 − e^(−t/RC)), τ = RC.
Check yourself
Sources
- National Medical Commission NEET (UG) syllabus and JEE Main / JEE Advanced 2026 syllabi: Electrostatic potential and capacitance
- Vacuum electric permittivity ε₀ = 8.854 187 8188 × 10⁻¹² F/m, CODATA 2022 via NIST https://physics.nist.gov/cuu/Constants/
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.