Module 34: Classification of elements and periodicity · Lesson 34.1 · about 32 min
Classification of elements and periodicity
How the periodic table is built from electron configurations, and why atomic radius, ionisation enthalpy, electron gain enthalpy, electronegativity, metallic character and the nature of oxides change the way they do, with every exception explained and Slater's rules for JEE Advanced.
Chemistry · Class 11 · about 32 minutes. By the end you will be able to place any element from its configuration, predict the order of radius, ionisation enthalpy, electron gain enthalpy and electronegativity for any set of elements, explain every common exception and work out an effective nuclear charge.
1. From triads to the modern periodic law
Chemists looked for order long before anyone knew about electrons. Döbereiner (1829) noticed triads such as Li, Na, K, where the middle atomic mass is roughly the average of the other two. Newlands (1865) saw that every eighth element (by mass) resembled the first, his law of octaves, which worked only up to calcium. Mendeleev (1869) arranged about 60 elements by atomic mass and similar properties, left gaps for undiscovered elements and predicted their properties. His “eka-aluminium” turned out to be gallium, and “eka-silicon” germanium.
Mendeleev had to swap a few pairs (such as Te and I) to keep families together. Moseley (1913) showed with X-ray spectra that the square root of the X-ray frequency rises in a straight line with the atomic number Z, not the mass. So the modern periodic law says: the properties of elements are a periodic function of their atomic numbers.
2. Periods, groups and blocks
The long form table has 7 periods (rows) and 18 groups (columns). The period is the highest principal quantum number n in the configuration. The number of elements in a period equals twice the number of orbitals being filled: 2, 8, 8, 18, 18, 32, 32.
| Block | Last electron enters | Groups | Group number from the configuration |
|---|---|---|---|
| s | ns | 1, 2 | number of s electrons |
| p | np | 13 to 18 | 10 + s electrons + p electrons |
| d | (n−1)d | 3 to 12 | d electrons + s electrons |
| f | (n−2)f | lanthanoids, actinoids (group 3) | placed below the main table |
Naming new elements. Until IUPAC gives a permanent name, an element above Z = 100 gets a temporary name from its digits: 0 nil, 1 un, 2 bi, 3 tri, 4 quad, 5 pent, 6 hex, 7 sept, 8 oct, 9 enn, ending in -ium. Z = 120 is unbinilium, symbol Ubn.
3. Shielding and effective nuclear charge
An outer electron does not feel the full nuclear charge Z, because the electrons between it and the nucleus cancel part of it. What it feels is the effective nuclear charge, Zeff = Z − S, where S is the shielding constant. Slater’s rules (for an s or p electron) estimate S: each other electron in the same shell adds 0.35, each electron in the shell just inside adds 0.85, and each electron deeper adds 1.00.
- Z
- atomic number: the number of protons, the full positive charge of the nucleus
- S
- shielding constant: how much of that charge the other electrons cancel
- Zeff
- effective nuclear charge felt by the electron you are looking at
- IE, EGE, EN
- ionisation enthalpy, electron gain enthalpy, electronegativity
- Physical meaning
- Across period 2 Zeff for the outer electron rises from about 1.3 (Li) to 5.2 (F): each new proton is only partly hidden by the new electron in the same shell. That one fact explains why atoms shrink and hold electrons harder from left to right.
4. Atomic and ionic radius
Across a period the radius falls (Zeff rises, same shell). Down a group it rises (a new shell each time). A cation is smaller than its atom (fewer electrons, sometimes a whole shell gone); an anion is larger (more electron repulsion, same nuclear charge).
Isoelectronic species have the same number of electrons. Among them, the one with more protons is smaller: O²⁻ > F⁻ > Na⁺ > Mg²⁺ > Al³⁺ (all have 10 electrons, Z = 8 to 13).
Lanthanoid contraction. The 4f electrons shield very poorly, so across the lanthanoids the size falls steadily. As a result, elements of the 5th and 6th periods in the same d-block group are almost the same size (Zr 160 pm and Hf 159 pm) and are hard to separate.
5. Ionisation enthalpy
Ionisation enthalpy (IE) is the energy needed to remove the most loosely held electron from one mole of isolated gaseous atoms: M(g) → M⁺(g) + e⁻. It is always positive. Size, nuclear charge, shielding and the stability of the subshell all matter. IE rises across a period and falls down a group, with two dips per period: Be > B and N > O (the reasons are in the figure note).
Successive ionisation enthalpies always increase (IE₁ < IE₂ < IE₃), because each electron leaves a more positive ion. A huge jump shows that a noble gas core has been broken into. Magnesium: 738, 1451, then 7733 kJ/mol, so Mg has 2 valence electrons and sits in group 2.
6. Electron gain enthalpy
Electron gain enthalpy (EGE) is the enthalpy change when one mole of gaseous atoms each gain an electron: X(g) + e⁻ → X⁻(g). It is negative when energy is released. Halogens have the most negative values; noble gases, Be, Mg and N have positive or near-zero values because the electron must enter a new subshell or spoil a half-filled one. Adding a second electron (O⁻ → O²⁻) is always endothermic, since the electron is pushed onto a negative ion.
“Fluorine has the most negative electron gain enthalpy because it is the most electronegative.” Electronegativity is about shared electrons in a bond; electron gain is about a lone gaseous atom. Fluorine’s 2p shell is so compact that the newcomer is strongly repelled, so chlorine releases more energy. The same thing happens in group 16: S is more negative than O.
7. Electronegativity, metallic character and oxides
Electronegativity (EN) is the pull of an atom on the shared electrons of a bond. It is not measured directly. Pauling’s scale comes from bond energies (F = 4.0, the highest). Mulliken’s is the average of IE and electron affinity (in eV); dividing it by about 2.8 gives a number close to Pauling’s. EN rises across a period and falls down a group.
Metallic character (the ease of losing electrons) falls across a period and rises down a group. So oxides move from basic (Na₂O, MgO) through amphoteric (Al₂O₃) to acidic (SiO₂, P₄O₁₀, SO₃, Cl₂O₇) across period 3. A few oxides are neutral: CO, NO, N₂O. For one element, a higher oxidation state gives a more acidic oxide (Mn₂O₇ is acidic, MnO basic).
8. Valence, the inert pair and diagonal pairs
The valence of s- and p-block elements is usually the number of valence electrons or 8 minus it. Down groups 13 to 15 the lower oxidation state becomes more stable (Tl⁺, Pb²⁺, Bi³⁺): the ns² pair is reluctant to take part, the inert pair effect.
The first element of each group (Li, Be, B, C, N, O, F) is unusual: it is small, highly electronegative and has no d orbitals, so it cannot exceed four bonds. It often resembles the element diagonally below it in the next group: Li and Mg, Be and Al, B and Si (the diagonal relationship), because their charge-to-size ratios are similar.
“Down a group, ionisation enthalpy always falls.” Usually, but group 13 breaks the rule: Ga (579 kJ/mol) is about equal to Al (578), and Tl is above In. The filled 3d and 4f subshells shield poorly, so the outer electrons feel a larger pull than expected.
- Modern periodic law: properties repeat with atomic number (Moseley), not atomic mass.
- Period = highest n; group = s electrons (s-block), 10 + s + p (p-block), d + s (d-block).
- Zeff = Z − S; Slater: 0.35 same shell, 0.85 shell inside, 1.00 deeper.
- Radius falls across, rises down; isoelectronic: more protons, smaller ion.
- IE rises across with dips at Be > B and N > O; a big jump in successive IE marks the group.
- Most negative electron gain enthalpy: Cl (not F). Highest EN: F.
- Oxides: basic on the left, amphoteric Al₂O₃, acidic on the right; CO, NO, N₂O neutral.
- Diagonal pairs Li-Mg, Be-Al, B-Si; inert pair effect makes lower states stable down groups 13 to 15.
Check yourself
Sources
- IUPAC Periodic Table of the Elements and the 1979 recommendations for naming elements of atomic number above 100 https://iupac.org/what-we-do/periodic-table-of-elements/
- NIST Atomic Spectra Database: ionisation energies https://physics.nist.gov/PhysRefData/ASD/ionEnergy.html
- Cordero B. et al. (2008), Covalent radii revisited, Dalton Transactions, 2832-2838
- Slater J. C. (1930), Atomic shielding constants, Physical Review 36, 57
- NEET (UG) and JEE Main / JEE Advanced 2026 syllabi: Classification of elements and periodicity in properties
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.