All lessons

Module 21: Magnetism and matter · Lesson 21.2 · about 26 min

Magnetism and matter: question types and traps

Every way entrance exams ask about magnetism and matter: dipole fields, cut and bent magnets, combinations, torque, energy and oscillations, Earth's field, dip and neutral points, B, H, M and susceptibility, classifying materials, Curie's law and hysteresis, each with a method and its trap.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 12 · about 26 minutes. Read the lesson Magnetism and matter first. Here you meet every question type, with the method and the trap, then practise.

Treat every magnet as a vector arrow m and every material as a number χ. Arrow questions (fields, torques, combinations, oscillations) copy the electric dipole; number questions (classification, Curie, hysteresis) need the table of materials.

The nine question types

1. Dipole fields. Axis 2× equator at the same distance. Point at angle θ: (μ₀/4π)(m/r³)√(1 + 3cos²θ). Trap: using 1/r² as for a single pole.
2. Cutting, bending, combining. Moments add as vectors; cut across keeps pole strength; bend into an arc of angle θ: m' = m × (chord/length). Trap: adding magnitudes of crossed magnets.
3. Torque, work and energy. τ = mB sin θ, W = mB(cos θ₁ − cos θ₂). Trap: stable is θ = 0 with U = −mB; unstable is θ = 180°.
4. Oscillation magnetometer. T = 2π√(I/mB); compare fields or moments by T². Two magnets tied like poles together oscillate faster (m₁ + m₂), unlike poles slower (m₁ − m₂). Trap: forgetting that I also changes when a magnet is cut.
5. Earth's field and dip. B_H = B cos δ, B_V = B sin δ. Apparent dip in a plane at angle α to the meridian: tan δ' = tan δ / cos α; true dip from two perpendicular planes: cot²δ = cot²δ₁ + cot²δ₂. Trap: mixing up the angle with the vertical and with the horizontal.
6. Neutral points. N pointing north: equatorial line, (μ₀/4π)m/r³ = B_H. N pointing south: axis, (μ₀/4π)2m/r³ = B_H. Trap: putting the neutral point on the wrong line.
7. B, H, M and χ. H = nI; M = χH; B = μ₀(H + M). Trap: H in a solenoid does not depend on the core; B does.
8. Classifying materials. Sign and size of χ, behaviour in a non-uniform field, effect of temperature. Trap: diamagnetism exists in all materials but is hidden when para- or ferromagnetism is present.
9. Hysteresis and energy loss. Energy per cycle per volume = loop area; power loss = area × volume × frequency. Choose soft iron for cores, steel for magnets. Trap: wanting high retentivity for an electromagnet; it should lose its magnetism when switched off.

Worked examples

Example 1 (level 3, bent magnet). A thin magnet of moment m and length L is bent at its middle to make an L shape (90°). New moment?

Solution. The poles are now at the ends of two arms of length L/2 at right angles: separation (L/2)2+(L/2)2=L/2. Pole strength unchanged, so m’ = m/√2.

Example 2 (level 4, oscillations in two arrangements). Two magnets with moments m₁ and m₂ (m₁ > m₂) and equal moments of inertia are tied together, first with like poles together, then with unlike. The periods are T₁ and T₂ with T₂ = 3T₁. Find m₁/m₂.

Solution. T22T12=m1+m2m1−m2=9, so m₁ + m₂ = 9m₁ − 9m₂ and m₁/m₂ = 10/8 = 1.25.

Example 3 (level 4, true dip). In two vertical planes at right angles to each other, a dip needle shows 30° and 45°. Find the true dip.

Solution. cot2⁡δ=cot2⁡30°+cot2⁡45°=3+1=4, so cot δ = 2 and δ = tan⁻¹(1/2) ≈ 26.6°. Check: the true dip is less than both apparent dips, as it must be.

Example 4 (level 5, hysteresis loss). An iron core of volume 500 cm³ has a hysteresis loop of area 300 J/m³ per cycle and runs on 50 Hz. Power lost?

Solution. P = 300 × (500 × 10⁻⁶) × 50 = 7.5 W, all turned into heat in the core.

“A diamagnet has no atomic magnets, so it cannot respond to a field.” Its atoms have zero net moment, but an applied field changes the electrons’ orbital motion (Lenz’s law at the atomic scale) and induces a small moment opposite to the field. That is diamagnetism.

Combination
like poles together: m₁ + m₂; unlike: m₁ − m₂; at 90°: √(m₁² + m₂²)
Apparent dip
tan δ' = tan δ / cos α, where α is the plane's angle with the magnetic meridian
Physical meaning
Only the horizontal part of the Earth's field turns a compass in a flat plane; the vertical part is why a dip needle tilts.

Practise

The set climbs from level 1 to level 5 and includes numericals, assertion-reason, statements, matching lists, multi-correct and passage questions. Templates give new numbers each time.

  • Nine types: dipole fields, cut and bent magnets, torque and energy, oscillations, dip, neutral points, B-H-M, materials, hysteresis.
  • Moments add as vectors; L-bend gives m/√2, semicircle 2m/π.
  • T² ∝ 1/(mB); like poles together oscillate faster.
  • True dip from two planes: cot²δ = cot²δ₁ + cot²δ₂.
  • H = nI does not depend on the core.
  • Hysteresis power = loop area × volume × frequency.

Check yourself

1Two identical short magnets of moment m are placed to form a plus sign (crossed at their centres). The net moment is:
2The susceptibility of a paramagnetic salt is 2 × 10⁻⁴ at 300 K. At 150 K it is:
3At a place the dip is 60° and the horizontal component is 30 µT. The total field is:

Sources

  • JEE Main, JEE Advanced 2026 and NEET (UG) syllabi: Magnetism and matter; question patterns studied from the exams' published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.