All lessons

Module 11: Fluids: pressure, flow, viscosity and surface tension · Lesson 11.1 · about 38 min

Fluids: pressure, flow, viscosity and surface tension

Pressure and depth, Pascal's law and hydraulic machines, barometers and manometers, Archimedes' principle and floating, accelerating and rotating liquids, continuity and Bernoulli's equation, Torricelli and Venturi, viscosity, Stokes' law and terminal speed, surface tension, excess pressure and capillary rise.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 11 · about 38 minutes. By the end you will be able to find pressure anywhere in a still, accelerating or spinning liquid, decide how deep things float, use continuity and Bernoulli’s equation for flowing liquids, find terminal speeds, and solve drop, bubble and capillary problems.

A fluid at rest pushes equally in all directions, and the push grows with depth because of the weight of the fluid above. When a fluid flows, it trades pressure for speed: where it moves faster, it pushes less. Viscosity is fluid friction, and surface tension is the skin a liquid surface makes.

1. Pressure in a liquid at rest

Pressure P = force per unit area (Pa). At depth h below a free surface open to the air:

P=P0+ρgh

P₀ is the atmospheric pressure (1 atm = 1.013 × 10⁵ Pa ≈ 76 cm of mercury ≈ 10.3 m of water). ρgh alone is the gauge pressure. All points at the same depth in one connected liquid at rest have the same pressure, whatever the vessel’s shape.

  • Pascal’s law: extra pressure applied to an enclosed liquid reaches every part of it unchanged. A hydraulic lift multiplies force: F2=F1A2/A1, but the large piston moves less, so work is not multiplied.
  • Barometer: a mercury column of height h balances the air: P₀ = ρgh. Manometer: a U-tube whose level difference shows a gauge pressure.
  • U-tube with two liquids: equate pressures at the level of the lower interface: ρ1h1=ρ2h2.
  • Force on a dam of width w and depth H (gauge only): 12ρgwH2, acting H/3 above the bottom.

2. Buoyancy and floating

Archimedes’ principle: a body in a fluid feels an upward buoyant force equal to the weight of fluid it pushes aside: FB=ρfluidVsubg. The cause is the pressure difference between the bottom and top of the body.

  • Fully under: apparent weight = true weight − ρ_fluid V g.
  • Floating: weight = buoyant force, so the fraction under the surface is ρbody/ρfluid.
  • In a lift accelerating up at a, both weight and buoyancy scale with (g + a), so a floating body floats at the same depth.

“Heavy things sink and light things float.” It is density that decides, not weight. A steel ship floats because its hull encloses so much air that its average density is less than water’s. A small pebble sinks.

3. Accelerating and rotating liquids (JEE)

  • Container accelerating horizontally at a: the free surface tilts at tan⁡θ=a/g, with the liquid piling up at the back.
  • Accelerating up at a: g is replaced by g + a everywhere, so P=P0+ρ(g+a)h.
  • Spinning about a vertical axis at ω: the surface becomes a paraboloid, y=ω2r22g, higher at the rim.

4. Flowing fluids: continuity and Bernoulli

In steady, streamline flow each particle follows the one before it along fixed lines. For an incompressible liquid, the volume per second through every cross-section is the same:

A1v1=A2v2(continuity)

For an ideal liquid (no viscosity, incompressible, steady flow), energy per unit volume is constant along a streamline:

P+12ρv2+ρgh=constant(Bernoulli)
P
pressure, the energy per unit volume stored by squeezing
½ρv²
kinetic energy per unit volume
ρgh
gravitational potential energy per unit volume
A, v
cross-section area and flow speed
Physical meaning
Bernoulli's equation is energy conservation for a fluid. To speed up, a fluid parcel must be pushed from a region of higher pressure to one of lower pressure.

Change the flow and the narrowing below.

A Venturi tube. In the narrow throat the water moves faster (continuity) and its pressure is lower (Bernoulli), so the middle tube's column stands lower. The height difference measures the flow rate.

Applications:

  • Torricelli: water leaks from a hole at depth h below the surface with v=2gh, like a body falling h. A hole at depth h in a tank of height H throws water a horizontal distance 2h(H−h), greatest for a hole halfway down.
  • Venturi meter: v1=A22ΔPρ(A12−A22).
  • Lift on a wing, spinning balls, sprayers: faster air on one side means lower pressure there.

5. Viscosity

Viscosity is internal friction between layers moving at different speeds. Newton’s law of viscosity: F=ηAdvdy, with η the coefficient of viscosity (Pa s; 1 poise = 0.1 Pa s). Liquids get less viscous when heated; gases get more viscous.

  • Stokes’ law: drag on a small sphere F=6πηrv.
  • Terminal speed (weight = buoyancy + drag): vt=2r2(ρ−σ)g9η, where ρ is the sphere’s density and σ the liquid’s. It grows as r².
  • Poiseuille: volume per second through a pipe Q=πPr48ηL. The r⁴ means a slightly narrowed blood vessel carries much less blood.
  • Reynolds number Re=ρvD/η: below about 2000 the flow is streamline, above about 3000 turbulent.

6. Surface tension

Molecules at a liquid surface are pulled inward by their neighbours, so the surface behaves like a stretched skin. Surface tension T = force per unit length along a line in the surface (N/m) = surface energy per unit area (J/m²). Making new surface takes work: W=TΔA (a soap film has two surfaces, so double the area).

Excess pressure inside a curved surface:

Case Excess pressure
Liquid drop, or air bubble inside a liquid 2T/r
Soap bubble in air (two surfaces) 4T/r

Smaller bubbles have higher pressure: join two soap bubbles by a tube and the small one shrinks into the big one.

Capillary rise: in a narrow tube of radius r, a liquid that wets the glass (contact angle θ < 90°) rises to

h=2Tcos⁡θρgr

Mercury (θ > 90°) is pushed down instead. In a tube shorter than h, the liquid does not overflow; the surface just becomes flatter (larger radius of curvature).

“Water rises in a capillary because the tube sucks it up.” Nothing sucks. The surface tension along the edge of the curved surface pulls the liquid up, and it stops when the weight of the column balances that pull. That is why h ∝ 1/r.

Merging drops (JEE). n small drops of radius r join into one big drop of radius R=n1/3r. Surface area falls, so energy 4πT(nr2−R2) is released as heat.

  • P = P₀ + ρgh, independent of vessel shape; Pascal: pressure passes unchanged; hydraulic lift F₂ = F₁A₂/A₁.
  • Buoyancy = weight of fluid displaced; floating fraction under = ρ_body/ρ_fluid.
  • Accelerating container: tan θ = a/g; spinning liquid: y = ω²r²/2g.
  • Continuity A₁v₁ = A₂v₂; Bernoulli P + ½ρv² + ρgh = constant; Torricelli v = √(2gh).
  • Viscous force ηA dv/dy; Stokes 6πηrv; terminal speed 2r²(ρ − σ)g/9η; Poiseuille Q ∝ r⁴.
  • Surface tension = force per length = energy per area; drop 2T/r, soap bubble 4T/r.
  • Capillary rise h = 2T cos θ/(ρgr); mercury falls.

Check yourself

1Three vessels with the same base area but different shapes are filled with water to the same height. The pressure at the base is:
2Water flowing through a horizontal pipe enters a narrower section. There, the water's:
3The excess pressure inside a soap bubble of radius r (surface tension T) is:

Sources

  • National Medical Commission NEET (UG) syllabus and JEE Main / JEE Advanced 2026 syllabi: Mechanical properties of fluids
  • Surface tension of water at 20 °C ≈ 0.0728 N/m and viscosity data: CRC Handbook of Chemistry and Physics, rounded as exams use them
  • Standard atmosphere 101 325 Pa (exact by definition), BIPM SI Brochure, 9th edition https://www.bipm.org/en/publications/si-brochure

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.