Module 19: Current electricity and circuits · Lesson 19.2 · about 28 min
Current electricity and circuits: question types and traps
Every way entrance exams ask about DC circuits: drift velocity, resistance of stretched and shaped wires, temperature effects, networks with symmetry and ladders, cells and maximum power, Kirchhoff loops, bridges and potentiometers, meter conversion and loading, and heating and bulbs, each with a method and its trap.
Physics · Class 12 · about 28 minutes. Read the lesson Current electricity and circuits first. Here you meet every question type, with the method and the trap, then practise.
The ten question types
Worked examples
Example 1 (level 3, ring of wire). A uniform wire of resistance 12 Ω is bent into a circle. Find the resistance between two points 90° apart.
Solution. The arcs are a quarter and three quarters: 3 Ω and 9 Ω, in parallel. R = 27/12 = 2.25 Ω. Trap: treating the arcs as in series.
Example 2 (level 4, infinite ladder). Each rung and each side piece of an infinite ladder is R. Find the input resistance.
Solution. Adding one more step does not change an infinite ladder: . This gives , so x = R(1 + √5)/2 ≈ 1.618R. Only the positive root has meaning.
Example 3 (level 4, cells with one reversed). Six cells, each 2 V and 0.5 Ω, are in series but one is connected backwards. They drive a 7 Ω resistor. Find the current.
Solution. Net emf = 5 × 2 − 2 = 8 V. Internal resistance = 6 × 0.5 = 3 Ω (all six count). I = 8/(7 + 3) = 0.8 A. Trap: using 10 V or 2.5 Ω.
Example 4 (level 5, cube between face-diagonal corners). Twelve 1 Ω resistors form a cube. Find the resistance between two corners at opposite ends of one face’s diagonal.
Solution. Inject current I at A, take it out at C (face diagonal). By symmetry, the two corners next to both A and C on that face are at the same potential, and so are their partners on the opposite face. Joining them and simplifying gives 3/4 Ω. Check list to memorise: edge 7/12, face diagonal 3/4, body diagonal 5/6 (all × R).
“An ammeter must have a large resistance to be accurate.” The opposite. An ammeter is put in series, so its own resistance reduces the current it is trying to measure: it should be as small as possible. A voltmeter goes in parallel and should draw almost no current: as large as possible.
- Equal-potential points
- points placed symmetrically with respect to the input and output; a resistor between them carries no current
- Self-similar network
- an infinite ladder or grid that looks the same after removing one section; write R in terms of itself
- Physical meaning
- A circuit's currents arrange themselves so that every point has one potential. Symmetry tells you which points must match before you calculate anything.
Practise
The set climbs from level 1 to level 5 and includes numericals, assertion-reason, statements, matching lists, multi-correct and passage questions. Templates give new numbers each time.
- Ten types: drift, shaped wires, temperature, networks, cells and power, Kirchhoff, bridges, potentiometer, meters, heating.
- Redraw first; join equal-potential points; drop balanced bridge arms.
- A reversed cell subtracts 2E from the row’s emf but its resistance still adds.
- Cube: edge 7R/12, face diagonal 3R/4, body diagonal 5R/6. Ladder of R: 1.618R.
- Potentiometer: r = R(l₁/l₂ − 1); metre bridge: X = S l/(100 − l).
- Real voltmeters load a circuit and read low.
Check yourself
Sources
- JEE Main, JEE Advanced 2026 and NEET (UG) syllabi: Current electricity; question patterns studied from the exams' published papers (no questions copied)
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.