All lessons

Module 22: Electromagnetic induction · Lesson 22.1 · about 34 min

Electromagnetic induction

Magnetic flux, Faraday's law and Lenz's law, motional emf in sliding and rotating rods, terminal speed, induced electric fields, eddy currents, self and mutual inductance, energy in an inductor, LR growth and decay, and the AC generator, up to JEE Advanced rail problems.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 12 · about 34 minutes. By the end you will be able to find the induced emf and current in any changing-flux or moving-conductor set-up, give their directions, and solve inductor circuits and rail problems.

Whenever the magnetic flux through a circuit changes, nature makes an emf that tries to undo the change. Faraday's law gives its size, Lenz's law its direction, and energy conservation explains both: the work you do against the opposition is what becomes electrical energy.

1. Flux, Faraday and Lenz

Magnetic flux through a flat area A is Φ=BAcos⁡θ (weber, Wb = T m²), θ being the angle between B and the area’s normal. For N turns, the flux linkage is NΦ.

ε=−NdΦdt

The flux can change because B changes, the area changes, or the angle changes. Lenz’s law (the minus sign): the induced current flows so that its own field opposes the change of flux. Push a magnet’s N pole towards a coil and the near face of the coil becomes an N pole, pushing back; pull it away and the near face becomes S, pulling back.

“The induced field always points opposite to the magnet’s field.” It opposes the change, not the field. When the flux is decreasing, the induced field points the same way as the original, trying to keep the flux up.

Charge that flows does not depend on how fast the change happens: q=NΔΦR.

2. Motional emf

A rod of length l moving at speed v across a field B has an emf ε=Blv between its ends. The magnetic force on its free electrons (qv × B) pushes them to one end until an electric field balances it. In general ε=(v→×B→)⋅l→: only the parts of v, B and l that are mutually perpendicular count.

Set-up emf
Rod sliding on rails Blv
Rod rotating about one end 12Bωl2
Rod rotating about its middle zero between its ends
Disc of radius R spinning (centre to rim) 12BωR2
Coil of N turns, area A, rotating NBAωsin⁡ωt

3. Rods on rails and terminal speed

Close the circuit with a resistor R and a current I=Blv/R flows. The field now pushes on the current with F=BIl=B2l2vR, against the motion. Pull the rod with a steady force F and watch it settle.

A rod pulled along rails by a constant force. The induced current makes a backward force that grows with speed, so the rod approaches a terminal speed FR/(B²l²) exponentially, with time constant mR/(B²l²).

If instead the rod is given a push and left, mdvdt=−B2l2Rv: the speed dies away as v0e−t/τ and it stops after a distance mv0RB2l2, all its kinetic energy turned into heat. A rod falling on vertical rails reaches vt=mgRB2l2.

4. Induced electric fields and eddy currents

A changing B makes an electric field that circles round, even in empty space: ∮E→⋅dl→=−dΦdt. Inside a long solenoid whose field changes at dB/dt, at radius r: E=r2dBdt (inside), E=R22rdBdt (outside). This field is not conservative: it has no potential.

Eddy currents are induced loops in solid metal. They brake (magnetic braking in trains, damping in galvanometers), heat (induction cooktops) and waste energy in transformer cores, which is why cores are made of thin insulated sheets (laminations).

5. Self and mutual inductance

A coil’s own changing current changes its own flux: NΦ=LI and ε=−LdIdt. The self-inductance L (henry, H) is a kind of electrical inertia: it resists changes in current.

  • Long solenoid: L=μ0n2Al=μ0N2Al, times μ_r for a core.
  • Mutual inductance: N2Φ2=MI1, ε2=−MdI1dt. For two solenoids, one wound on the other: M=μ0n1n2Al. In general M=kL1L2, with coupling factor k ≤ 1.
  • Energy: U=12LI2, with energy density u=B22μ0 in the field.
Φ
magnetic flux through one turn (Wb)
L
self-inductance (H = Wb/A = V s/A)
M
mutual inductance, the same either way: M₁₂ = M₂₁
τ = L/R
time constant of an LR circuit, the time to reach 63% of the final current
Physical meaning
An inductor is to current what mass is to velocity: it lets current change only gradually, and it stores energy ½LI² as a moving mass stores ½mv².

6. LR circuits

Switch on a battery E across L and R in series: I=ER(1−e−t/τ), τ = L/R. Just after switching on, the inductor acts like a broken wire (no current yet); long after, like a plain wire. Remove the battery (short the circuit): I=I0e−t/τ. Opening a switch suddenly makes dI/dt huge, so a large emf appears and can spark.

AC generator. A coil turning at ω in a field B gives ε=NBAωsin⁡ωt, peak ε0=NBAω. The emf is largest when the plane of the coil is along B (flux zero but changing fastest) and zero when the plane is perpendicular to B (flux largest).

Worked example (level 4). A metal disc of radius 20 cm spins at 50 revolutions per second with its axis along a 0.5 T field. emf from axle to rim = ½ × 0.5 × (2π × 50) × 0.2² ≈ 3.14 V.

  • Φ = BA cos θ; ε = −N dΦ/dt; Lenz: the current opposes the change.
  • Charge through a coil q = NΔΦ/R, independent of speed.
  • Rod Blv; rotating rod ½Bωl²; disc ½BωR²; coil NBAω sin ωt.
  • Rails with R: force B²l²v/R; terminal speed FR/(B²l²) or mgR/(B²l²); τ = mR/(B²l²).
  • Induced E inside a solenoid (r/2) dB/dt; it is non-conservative. Eddy currents brake and heat.
  • L = μ₀n²Al; M = μ₀n₁n₂Al ≤ √(L₁L₂); U = ½LI², u = B²/2μ₀.
  • LR: I = (E/R)(1 − e^(−Rt/L)); inductor is an open circuit at t = 0, a wire at t = ∞.

Check yourself

1A magnet is dropped through a long vertical copper pipe. Compared with free fall, it falls:
2A rod of length l rotates at angular speed ω about one end, in a field B along the axis of rotation. The emf between its ends is:
3The energy stored in an inductor L carrying current I is:

Sources

  • National Medical Commission NEET (UG) syllabus and JEE Main / JEE Advanced 2026 syllabi: Electromagnetic induction
  • Vacuum magnetic permeability μ₀, CODATA 2022 via NIST https://physics.nist.gov/cuu/Constants/

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.