All lessons

Module 32: Some basic concepts: moles and stoichiometry · Lesson 32.1 · about 32 min

Some basic concepts: moles and stoichiometry

The mole, molar mass, percentage composition, empirical and molecular formulae, balanced equations, limiting reagent, percentage yield and every concentration unit (molarity, molality, mole fraction, ppm, normality), from basics to JEE Advanced depth.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Chemistry · Class 11 · about 32 minutes. By the end you will be able to move between grams, moles, particles and gas volumes, find formulae from analysis data, solve any stoichiometry problem and convert between every concentration unit.

Chemists cannot count atoms one by one, so they count them in packs of 6.022 × 10²³, called a mole. A mole of any substance weighs its formula mass in grams. Every calculation in this chapter is a trip through moles.

1. Atoms, molecules and the mole

The atomic mass unit (u) is 1/12 of the mass of a carbon-12 atom. A sodium atom has a mass of about 23 u, an oxygen molecule 32 u.

A mole is exactly 6.022 140 76 × 10²³ particles (the Avogadro number N_A, fixed exactly since 2019). The trick that makes it useful: one mole of a substance has a mass in grams equal to its formula mass in u. So 1 mol of water (18 u per molecule) weighs 18 g.

The mole is the hub: divide a mass by the molar mass to get moles, multiply moles by the Avogadro number to get particles, or by 22.4 L/mol to get a gas volume at STP.
n
amount of substance in moles
m
mass in grams
M
molar mass in g/mol (formula mass in u, as a number)
N
number of particles = n × N_A
Physical meaning
n = m/M = N/N_A = V/22.4 (gas at STP). A mole is a counting pack like a dozen, only much larger, chosen so that grams and atomic masses use the same numbers.

“22.4 L is the volume of a mole of anything.” Only of an ideal gas at 0 °C and 1 atm. IUPAC’s newer standard (0 °C and 1 bar) gives 22.7 L. Most entrance questions still use 22.4 L at “STP”: use whatever the question says. A mole of water is only 18 mL.

2. Laws of chemical combination

Law What it says Example
Conservation of mass (Lavoisier) Mass is neither created nor destroyed in a reaction Mass of reactants = mass of products
Definite proportions (Proust) A compound always has the same elements in the same mass ratio Water is always 1 : 8 hydrogen to oxygen by mass
Multiple proportions (Dalton) When two elements form several compounds, the masses of one combining with a fixed mass of the other are in small whole-number ratios CO and CO₂: 16 g and 32 g of O per 12 g C, ratio 1 : 2
Gay-Lussac’s gaseous volumes Gases react in simple whole-number volume ratios (same T and P) H₂ + Cl₂ → 2HCl: 1 : 1 : 2 by volume
Avogadro’s law Equal volumes of gases at the same T and P contain equal numbers of molecules Explains Gay-Lussac’s ratios

3. Formulae from analysis

Percentage composition = (mass of element in one mole / molar mass) × 100.

Empirical formula from percentages. Take 100 g, so each percentage becomes grams. Example: C 40%, H 6.7%, O 53.3%.
Change grams to moles. C: 40/12 = 3.33; H: 6.7/1 = 6.7; O: 53.3/16 = 3.33.
Divide by the smallest. 3.33 : 6.7 : 3.33 → 1 : 2 : 1. If you get 1.5 or 1.33, multiply all by 2 or 3 to reach whole numbers.
Empirical formula CH₂O (mass 30). Molecular formula = (empirical)ₙ, with n = molar mass / empirical mass. With M = 60, n = 2: C₂H₄O₂ (acetic acid).

4. Stoichiometry and the limiting reagent

A balanced equation is a recipe in moles: N₂ + 3H₂ → 2NH₃ means 1 mol N₂ needs 3 mol H₂ and gives 2 mol NH₃. To solve any problem: grams → moles → use the equation’s ratio → moles → grams.

The limiting reagent is the one that runs out first. Divide each reactant’s moles by its coefficient; the smallest result is limiting and sets how much product forms. The other reactant is left in excess.

Percentage yield = (actual product / theoretical product) × 100. For reactions in sequence (A → B → C), multiply the yields of each step. For simultaneous reactions, write one equation per reaction and share out the reactant.

“The reactant with the smaller mass is the limiting reagent.” Mass is not the test. Mix 28 g of N₂ (1 mol) with 9 g of H₂ (4.5 mol): hydrogen is the smaller mass, but 1 mol of N₂ needs only 3 mol of H₂, so hydrogen is in excess and the heavier nitrogen runs out first. Always compare moles divided by coefficients.

5. Concentration units

Unit Definition Changes with temperature?
Mass percent (w/w) (mass of solute / mass of solution) × 100 No
Mole fraction x moles of a component / total moles (sum of all = 1) No
Molality m moles of solute / kg of solvent No
Molarity M moles of solute / litre of solution Yes
ppm parts of solute per million parts of solution (by mass unless stated) No (by mass)
Normality N (JEE Advanced) gram-equivalents of solute / litre of solution = M × n-factor Yes

Useful links: dilution M1V1=M2V2; mixing M=M1V1+M2V2V1+V2; molarity to molality with density d (g/mL) and solute molar mass M₂:

m=1000M1000d−MM2

n-factor (for equivalents): acids, the number of H⁺ given per molecule (H₂SO₄ 2, H₃PO₃ 2 because one H is bonded to P); bases, OH⁻ given; in redox, the electrons gained or lost per formula unit (KMnO₄ in acid 5, in neutral 3, in strong base 1).

  • 1 mol = 6.022 × 10²³ particles; its mass in grams equals the formula mass in u.
  • n = m/M = N/N_A = V/22.4 L (ideal gas at STP; 22.7 L at 0 °C and 1 bar).
  • Empirical formula: % → grams in 100 g → moles → divide by the smallest → whole numbers.
  • Molecular formula = (empirical)ₙ with n = molar mass / empirical formula mass.
  • Limiting reagent: smallest moles ÷ coefficient; it decides the product.
  • Molality, mole fraction and mass % do not change with temperature; molarity and normality do.
  • Dilution M₁V₁ = M₂V₂; normality = molarity × n-factor.

Check yourself

1How many atoms are in 0.5 mol of ammonia, NH₃?
2Which concentration unit does not change when the solution is heated?
3A compound has the empirical formula CH₂O and molar mass 180 g/mol. Its molecular formula is:

Sources

  • IUPAC (2019), the mole is defined by fixing N_A = 6.022 140 76 × 10²³ mol⁻¹ exactly; BIPM SI Brochure, 9th edition https://www.bipm.org/en/publications/si-brochure
  • IUPAC Gold Book: standard conditions for gases (STP 273.15 K and 1 bar, molar volume 22.711 L/mol) https://goldbook.iupac.org
  • NEET (UG) and JEE Main / JEE Advanced 2026 syllabi: Some basic concepts in chemistry

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.