All lessons

Module 80: Biotechnology: principles and processes · Lesson 80.1 · about 32 min

Biotechnology: principles and processes

The principles of genetic engineering, restriction enzymes and their naming, palindromes and sticky ends, gel electrophoresis, cloning vectors (ori, selectable markers, pBR322, insertional inactivation, blue-white screening), making hosts competent, isolating DNA, PCR, bioreactors and downstream processing, with the counts and traps NEET asks most.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Biology · Class 12 · about 32 minutes. By the end you will be able to explain how a gene is cut, joined into a vector, put into a host and copied, choose the right selection method, solve PCR and restriction counting problems, and describe how a recombinant product is made on a large scale.

Genetic engineering is cut, paste and copy for DNA. Restriction enzymes are the scissors, ligase is the glue, a plasmid is the carrier that a cell will copy, and the host cell is the photocopier. PCR copies a gene without any cell at all.

1. The principles

Modern biotechnology rests on two techniques: genetic engineering (changing DNA or RNA and putting it into a host to change its traits) and bioprocess engineering (keeping sterile conditions so only the wanted microbe grows, in large amounts). A piece of DNA alone cannot copy itself in a new cell; it must join a sequence that starts replication, the origin of replication (ori).

The first recombinant DNA was made in 1972 by Stanley Cohen and Herbert Boyer: they joined an antibiotic resistance gene into a plasmid of Salmonella typhimurium and put it into E. coli, where it was copied. The three basic steps of any genetic engineering: find the DNA with the wanted gene; move it into a host; keep and transfer it to the host’s progeny.

2. Tools: restriction enzymes

In 1963 two enzymes that stop virus growth in E. coli were found; one cut DNA. These are restriction endonucleases, and the first was Hind II, which always cuts at a particular six base-pair sequence (its recognition sequence). More than 900 are now known from over 230 strains of bacteria.

Naming: In EcoRI, E is the genus Escherichia, co the species coli, R the strain RY13 and I means the first enzyme found in it. The genus gives a capital letter, the species two small letters, then the strain, then a Roman numeral for the order of discovery.

Nucleases: exonucleases remove nucleotides from the ends; endonucleases cut inside. A restriction endonuclease reads the length of DNA and cuts both strands at its recognition site, which is a palindrome: the sequence reads the same on both strands when read in the same direction (5′ → 3′):

top strand 5′-GAATTC-3′, bottom strand 3′-CTTAAG-5′ (read 5′ → 3′, the bottom strand is also GAATTC).

EcoRI cuts between G and A on each strand, a little away from the centre, leaving short single-stranded overhangs called sticky ends. Because any DNA cut by the same enzyme has matching sticky ends, a gene and a vector cut with the same enzyme stick together by hydrogen bonds, and DNA ligase seals the backbone.

3. Gel electrophoresis

Cut DNA is separated by agarose gel electrophoresis. Agarose is a natural polymer from sea weeds. DNA is negatively charged, so in an electric field it moves towards the anode; the gel acts as a sieve, so smaller fragments move farther. The DNA is invisible until stained with ethidium bromide and lit with UV light, when bands glow bright orange. The wanted band is cut out of the gel and extracted (elution), then used to make recombinant DNA.

4. Cloning vectors

Plasmids and bacteriophages copy themselves inside bacteria independently of the chromosome, so a gene joined to them is copied with them. A good vector needs:

  1. ori: where replication starts; it also controls the copy number, so a high-copy vector gives many copies of the gene.
  2. Selectable marker: a gene that lets only transformed cells grow, usually antibiotic resistance (ampicillin, chloramphenicol, tetracycline or kanamycin). Normal E. coli resists none of these.
  3. Cloning sites: preferably a single recognition site for each enzyme used, so the vector is cut in only one place. In pBR322, BamH I and Sal I sites lie in the tetracycline resistance gene (tetR), Pvu I and Pst I in the ampicillin resistance gene (ampR); ori and rop (a gene for proteins that take part in replication) are also present.
  4. Small size.

Insertional inactivation. If a gene is inserted into tetR, the tetracycline resistance is lost. Plate the cells on ampicillin (all transformed cells grow), then copy to tetracycline: recombinants are the colonies that grew on ampicillin but not on tetracycline. Because this needs two plates, a simpler method uses the β-galactosidase (lacZ) gene as the cloning site: with a chromogenic substrate, colonies with an intact gene turn blue; recombinants, whose gene is broken by the insert, stay white. This is blue-white screening.

“In blue-white screening the blue colonies carry the gene.” Blue means β-galactosidase still works, so nothing was inserted. White colonies are the recombinants.

Vectors for plants and animals. Agrobacterium tumefaciens naturally puts a piece of DNA (T-DNA) from its Ti plasmid into plant cells, causing tumours. Disarmed Ti plasmids, no longer harmful, are used to carry genes into plants. Retroviruses, disarmed, carry genes into animal cells.

5. Making the host take up DNA

DNA is charged and cannot easily pass through cell membranes, so hosts must be made competent:

  • Treat bacteria with a divalent cation, usually calcium, then incubate the cells with the DNA on ice, give a brief heat shock at 42 °C, and return to ice.
  • Microinjection: inject DNA directly into an animal cell nucleus.
  • Biolistics (gene gun): shoot microparticles of gold or tungsten coated with DNA into plant cells.
  • Disarmed pathogen vectors: let them infect the cell to deliver the DNA.

6. The process step by step

1. Isolate the DNA. Break the cell with enzymes: lysozyme (bacteria), cellulase (plant), chitinase (fungus). Remove RNA with ribonuclease and proteins with protease. Add chilled ethanol: purified DNA precipitates as fine threads that can be spooled out.
2. Cut it. Incubate purified DNA with a restriction enzyme at the right conditions; check the cutting by agarose gel electrophoresis. Cut the vector with the same enzyme.
3. Amplify the gene by PCR (polymerase chain reaction). Two short primers (chemically made oligonucleotides) bind on either side of the target; a heat-stable DNA polymerase extends them. Repeated cycles copy the gene about a billion times.
4. Ligate and insert. Join the gene to the vector with DNA ligase and transform a competent host. Select transformants on an antibiotic plate.
5. Get the product. A protein coded by a foreign gene and made in a host is a recombinant protein. The cells are grown in large volumes in a bioreactor, and the product is collected and purified.

7. PCR in detail

Each PCR cycle has three steps: denaturation (about 94 °C, strands separate), annealing (cooler, primers bind), extension (polymerase copies from each primer). The enzyme is Taq polymerase from the bacterium Thermus aquaticus, which lives in hot springs and stays active at the high temperatures used to separate strands. Each cycle doubles the DNA.

PCR copies on a log scale: n cycles give start × 2ⁿ copies (ideal). The strip shows the three temperatures of one cycle.

8. Bioreactors and downstream processing

Small cultures cannot make enough product, so cells are grown in bioreactors of 100 to 1000 litres or more. A bioreactor gives the best conditions for growth: temperature, pH, substrate, salts, vitamins and oxygen. The most common is the stirred-tank type: a cylinder with a curved base and a stirrer that mixes the contents and spreads oxygen; air may also be bubbled in (sparged). It has an agitator, oxygen delivery, foam control, temperature and pH control, and sampling ports. In a continuous culture, used medium is drained from one side while fresh medium is added from the other, keeping cells in their active log phase for longer and giving more product.

After growth, the product goes through downstream processing: separation and purification, then formulation with suitable preservatives. For medicines, strict quality control and clinical trials follow. Each product needs its own process.

Palindrome
a DNA sequence that reads the same 5′ → 3′ on both strands, e.g. GAATTC
Sticky ends
single-stranded overhangs left by a staggered cut; they pair with matching ends
ori, marker, cloning site
start of copying, gene to select transformants, unique place to insert the gene
Competent cell
a host made able to take up DNA (Ca²⁺ and heat shock)
Downstream processing
separation, purification and formulation of the product
Physical meaning
Sticky ends are like puzzle pieces cut by the same die: any two pieces cut by one enzyme fit together.
  • Two pillars: genetic engineering and bioprocess engineering; first rDNA by Cohen and Boyer (1972).
  • Restriction endonucleases cut at palindromes; Hind II first; EcoRI = E. coli RY13, enzyme I; sticky ends joined by ligase.
  • Gel: agarose, DNA to the anode, small fragments go farthest, ethidium bromide + UV, elution.
  • Vector needs ori (copy number), selectable marker, unique cloning sites, small size; pBR322: BamH I and Sal I in tetR, Pvu I and Pst I in ampR.
  • Insertional inactivation; blue-white screening (white = recombinant).
  • Ti plasmid of Agrobacterium for plants, disarmed retroviruses for animals.
  • Competence: Ca²⁺, ice, 42 °C heat shock; microinjection; gene gun.
  • Isolation: lysozyme, cellulase, chitinase; RNase, protease; chilled ethanol.
  • PCR: denature, anneal, extend; Taq polymerase; start × 2ⁿ.
  • Stirred-tank bioreactors; downstream processing: separation, purification, formulation, quality control.

Check yourself

1In the name EcoRI, the letter "R" stands for:
2During gel electrophoresis DNA fragments move towards the:
3If a foreign gene is inserted into the tetracycline resistance gene of pBR322, recombinant cells will:

Sources

  • NCERT Biology Class 12 (2023 rationalised), chapter Biotechnology: principles and processes: topics followed, no text copied
  • National Medical Commission, NEET (UG) syllabus: Biotechnology and its applications https://www.nmc.org.in
  • Cohen S. N., Chang A. C. Y., Boyer H. W., Helling R. B. (1973), Construction of biologically functional bacterial plasmids in vitro, PNAS 70(11), 3240-3244 https://doi.org/10.1073/pnas.70.11.3240
  • Saiki R. K. et al. (1988), Primer-directed enzymatic amplification of DNA with a thermostable DNA polymerase, Science 239(4839), 487-491 https://doi.org/10.1126/science.2448875

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.