Module 7: Solid state physics · Lesson 7.1 · about 50 min
Bravais lattices and the reciprocal lattice
Primitive vectors and cells, the reciprocal basis and why every reciprocal vector stands for a family of planes, the reciprocal lattices of sc, bcc, fcc, hexagonal and oblique lattices, Wigner-Seitz cells and Brillouin zones with their high-symmetry points, higher zones, and Fermi spheres inside the zone.
Module 7 · about 50 minutes. This lesson takes the vocabulary of the JAM crystal structure lesson (lattice, basis, Miller indices) and builds the one idea every later solid-state lesson runs on: the reciprocal lattice and its Brillouin zones. Diffraction, phonons, electron bands and Fermi surfaces are all drawn in this space.
1. Bravais lattices and primitive cells, quickly
A Bravais lattice is the set of points with integer , and its defining property is that every point has identical surroundings, in the same orientation. There are 5 in 2D and 14 in 3D. Arrays that fail the orientation test are lattices with a basis: the honeycomb (graphene), hcp, diamond and the kagome net.
A primitive cell holds exactly one lattice point; its volume is the same for every choice of primitive vectors. Centred lattices are described with a bigger conventional cell, so keep the two volumes apart:
| Lattice | Conventional cube holds | Primitive vectors (one choice) | |
|---|---|---|---|
| sc | 1 point | ||
| bcc | 2 points | ||
| fcc | 4 points | ||
| hexagonal | — |
The symmetric primitive cell is the Wigner-Seitz cell: all points closer to one lattice point than to any other. It is built by drawing the perpendicular bisector planes to the neighbours and keeping the innermost region, so it has the full symmetry of the lattice. For sc it is a cube, for bcc a truncated octahedron, for fcc a rhombic dodecahedron.
2. The reciprocal lattice
Ask which plane waves have the period of the lattice. We need for every , so
The solutions form a lattice of their own, generated by vectors with :
Then gives , as required. A lattice-periodic function therefore has the Fourier series with .
- `$\vec b_j$`
- reciprocal primitive vectors; units of inverse length (Å⁻¹); `$\vec b_1$` is perpendicular to `$\vec a_2$` and `$\vec a_3$`
- `$\vec G$`
- a reciprocal lattice vector: the wave vector of a plane wave with the lattice period
- Reciprocal cell volume
- `$(2\pi)^3/V_c$`: a small real cell means a big reciprocal cell
- Physical meaning
- The direct lattice says where the atoms repeat; the reciprocal lattice says which spatial frequencies the crystal can contain. A diffraction pattern is a picture of the reciprocal lattice.
Three facts follow at once and are worth memorising:
- The reciprocal of the reciprocal is the direct lattice (the definition is symmetric in and ).
- The reciprocal lattice depends only on the Bravais lattice, never on the basis. The basis decides how strongly each scatters (the structure factor, lesson 7.2).
- is normal to the planes and , for any lattice, when have no common factor.
Why G is normal to (hkl). The plane nearest the origin cuts the axes at a₁/h, a₂/k, a₃/l. Two vectors lying in it are a₁/h − a₂/k and a₂/k − a₃/l.
Dot them with G = h b₁ + k b₂ + l b₃. G · (a₁/h − a₂/k) = 2π − 2π = 0, and the same for the other. So G is perpendicular to the plane.
The spacing. The distance from the origin to this plane is the projection of a₁/h on the unit normal: d = (G/|G|) · a₁/h = 2π/|G|.
Consequence. Every family of lattice planes is one point of the reciprocal lattice (its shortest G in that direction). Multiples nG are the higher orders of Bragg reflection.
Worked example (non-cubic spacing). A tetragonal crystal has Å and Å. Its reciprocal axes are orthogonal with lengths , so and Å⁻², Å. For hexagonal axes the same method gives ; the angle between two plane normals is the angle between their s, never between the bare index triples (unless the crystal is cubic).
3. Reciprocal lattices you must know
Work for the fcc vectors above: and , so . These are bcc primitive vectors.
| Direct lattice | Reciprocal lattice | Shortest | First Brillouin zone |
|---|---|---|---|
| sc, edge | sc, edge | cube | |
| bcc, edge | fcc, cube edge | (the {110} planes) | rhombic dodecahedron (12 faces) |
| fcc, edge | bcc, cube edge | (the {111} planes) | truncated octahedron (8 hexagons + 6 squares) |
| 2D hexagonal, side | hexagonal, side , turned | regular hexagon | |
| 2D oblique, | oblique, angle | `$ | \vec b_i |
In fcc-indexing language: is a reciprocal vector of fcc only when are all even or all odd, and of bcc only when is even. These are exactly the X-ray selection rules for the two cubic lattices: missing reflections are just points that are not in the true reciprocal lattice.
Change the lattice in the figure and check the claims: stays perpendicular to , the hexagonal reciprocal lattice is turned by 30°, and the readout shows that every zone has the same area.
4. Brillouin zones
The first Brillouin zone is the Wigner-Seitz cell of the reciprocal lattice. Its faces are Bragg planes: the perpendicular bisectors of . They matter because a wave with wave vector is Bragg-reflected exactly when ends on such a plane. For elastic scattering , i.e.
So electrons with on a zone face are reflected and band gaps open there; phonons on a zone face are standing waves with zero group velocity.
The th zone is the set of points reached from the origin by crossing exactly Bragg planes. Higher zones are broken into pieces, but each can be moved by reciprocal vectors to fill the first zone exactly once, so every zone has the same volume . For the square lattice of side , the second zone lies between the first square (side ) and the square of side turned by 45°: area , as promised.
High-symmetry points have standard names. For the fcc lattice (zone points in units of ):
| Point | Where | Coordinates | Distance from |
|---|---|---|---|
| centre of a square face | |||
| centre of a hexagonal face | (nearest face) | ||
| middle of an edge between two hexagons | |||
| corner (square meets two hexagons) | (farthest) |
For bcc: (corner, farthest), (face centre, nearest, ), . For the 2D hexagonal lattice: at and at , where graphene’s Dirac cones sit. A point is inside the fcc zone when and every (units ); on the surface when one of these is an equality.
Worked example (the zone in numbers). Copper is fcc with Å. ų, so Å⁻³. Å⁻¹ and Å⁻¹.
“The Brillouin zone is the conventional cell of the reciprocal lattice, and higher zones are shells of growing radius.” Neither. The first zone is the Wigner-Seitz cell (it has the full symmetry, and its volume is the primitive one, , not ). Higher zones are not spherical shells: a point at distance from in a square lattice can be in the first zone (along a diagonal) or the second (along an axis). The rule is “how many Bragg planes have I crossed”, never “how far am I”.
5. Counting states and the Fermi sphere in the zone
With periodic boundary conditions on a crystal of cells, the allowed form a fine grid with one point per . The first zone therefore holds exactly wave vectors: one per primitive cell. Each electron band holds electrons (spin), and each phonon branch has modes. Because and describe the same Bloch state or phonon, is a crystal momentum, conserved only up to .
Worked example (does the Fermi sphere fit?). A monovalent fcc metal has electrons, so . The nearest zone faces () are at . Ratio 0.90: the sphere sits inside the zone, which is why Na, K, Cu, Ag and Au have nearly spherical Fermi surfaces. A divalent simple cubic metal has : its sphere pokes through the faces (into zone 2) while the corners of zone 1 stay empty, so it conducts although “two electrons per cell fill one band”.
To see 3D zones from every angle, use the Brillouin zone viewer; the Miller index calculator works spacings and angles for every crystal system, and the band structure explorer shows what happens to electrons at the zone faces. The Ewald construction in the next lesson uses all of this.
- ; satisfies . The reciprocal lattice depends only on the Bravais lattice.
- and in every crystal; plane normals and angles come from , not from .
- sc ↔ sc (); bcc ↔ fcc with cube edge ; 2D hexagonal → hexagonal of side , turned 30°; 2D angle .
- Zone volume with the primitive volume: sc , bcc , fcc . All zones have equal volume.
- fcc zone: at , at , at , at . bcc zone: at , at . Hexagonal 2D: at .
- The zone holds wave vectors; is crystal momentum, conserved modulo .
Practise: exam questions on this lesson
Next: lesson 7.2 puts the reciprocal lattice to work in diffraction: the Laue condition, the Ewald sphere and the structure factor.
Check yourself
Sources
- N. W. Ashcroft and N. D. Mermin, Solid State Physics (1976), chapters 4, 5 and 9
- C. Kittel, Introduction to Solid State Physics, 8th ed. (2005), chapter 2
- J. M. Ziman, Principles of the Theory of Solids, 2nd ed. (1972), chapter 1
- GATE Physics (PH) syllabus, Solid State Physics section, published by the organising IIT each year
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Not affiliated with the IITs, IISc or the GATE organising institute. The general aptitude part of GATE is not covered here. Check the official GATE website for the current pattern. All questions are original.