Module 7: Solid state physics · Lesson 7.6 · about 50 min
The free electron model
Metals as a gas of free electrons: the Drude model and where it fails, the Sommerfeld gas with its Fermi sphere, density of states in one, two and three dimensions, Fermi energy, velocity and temperature, the chemical potential at finite temperature, the linear electronic heat capacity, degeneracy pressure, Wiedemann-Franz, plasma reflection and thin-film subbands.
Module 7 · about 50 minutes. By the end you will be able to find the Fermi energy, wave vector, velocity and temperature of any simple metal from its density and valence, count states in one, two and three dimensions, explain why electrons add almost nothing to a metal’s heat capacity at room temperature, and use the Drude and Sommerfeld pictures for conductivity, thermal conductivity, optical reflection and Hall effect. The Fermi-Dirac function and its use in semiconductors were met in IIT JAM lesson on semiconductors; particles in a box are in the JAM Schrödinger equation lesson.
1. The Drude model
Drude (1900) treated conduction electrons as a classical gas of density that collides randomly, with a mean time between collisions. Between collisions an electron accelerates freely; after one it forgets its velocity. On average:
In a steady field this gives the drift velocity , the current and
- n
- conduction electrons per m³ (valence × atoms per m³), about 10²⁸ to 10²⁹ in metals
- τ
- relaxation time, about 10⁻¹⁴ s at room temperature; it is the only fitted parameter
- μ = eτ/m
- mobility, drift speed per unit field; tens of cm²/V s in metals
- Physical meaning
- The field keeps pushing, collisions keep resetting, so the electrons settle into a slow drift (millimetres per second) proportional to the field: Ohm's law.
Worked example. Copper has Ω m and m⁻³. Then s.
The same equation handles two more cases you must know:
- A magnetic field (steady state, one kind of carrier): does not change with and , so , independent of and . Measuring counts the carriers. The Hall angle is .
- An AC field : . For the permittivity is with . Below , and light is reflected; above it the metal is transparent. For alkali metals to nm: shiny in the visible, transparent in the ultraviolet.
Where Drude fails. Classical equipartition gives each electron , so electrons should add per mole to the heat capacity. Experiment shows about 1% of that at room temperature. The mean free path with a thermal speed m/s comes out shorter than an atomic spacing, which makes no sense for electrons moving through a perfect lattice. And some metals have a positive Hall coefficient. The first two are cured by quantum statistics; the third needs band theory (lesson 7.7).
2. The Sommerfeld gas: filling the Fermi sphere
Put electrons in a cube of side with periodic boundary conditions. The states are plane waves with , so each allowed occupies a volume of -space and holds 2 electrons (spin). At the lowest states fill a sphere of radius :
with and .
Worked example (copper, one electron per atom). m⁻³ nm⁻³. nm⁻¹ Å⁻¹. With eV nm²: eV, m/s and K. Room temperature is : the electron gas is deeply degenerate.
Two consequences follow at once. The mean energy per electron is , not zero, so the gas pushes outwards even at :
For sodium this is 9 GPa, close to the measured bulk modulus of 6 GPa: the Pauli principle, not ion repulsion, makes alkali metals stiff. And the mean free path is nm, many lattice spacings: electrons are scattered by imperfections and vibrations, not by the ions of a perfect lattice.
3. Density of states in 1, 2 and 3 dimensions
The density of states counts states per unit energy (per unit length, area or volume). In dimensions the states below fill a ball of radius , so and . Including spin:
Useful results that follow:
- 3D: and .
- 2D: (linear in ) and . A GaAs electron gas with m⁻² and has meV.
- 1D: , , and diverges at the band bottom.
- General: .
A metal film a nanometre thick is 3D in the plane but quantised across: subbands start at , each with the constant 2D density of states, so is a staircase. For nm, eV, and a Fermi energy of 5 eV fills three subbands.
4. Finite temperature: who can move?
At temperature the occupation is the Fermi-Dirac function , which drops from 1 to 0 over a few around the chemical potential . Play with the figure: the occupied states change only in a band of width about .
The Sommerfeld expansion turns this into formulas. For any smooth ,
Applying it to and gives, in 3D,
Estimate first. About electrons lie within of ; each gains about . So and , linear in .
Exact coefficient. The Sommerfeld expansion gives . With this is .
Compare with Drude. The ratio to is ; for K at 300 K it is 0.012. Electrons are almost frozen.
Per mole. , a fraction of a mJ mol⁻¹ K⁻². Experiment divided by this value gives the thermal effective mass .
Worked example (separating electrons and phonons). At low temperature . Plot against : the intercept is , the slope . For mJ mol⁻¹ K⁻² and mJ mol⁻¹ K⁻⁴ the two are equal at K; below that the electrons dominate.
5. Transport with the Fermi sphere
In a field the whole Fermi sphere shifts by , so survives, with now the relaxation time of electrons at the Fermi surface. Heat is carried by the same electrons, with . Dividing:
This is the Wiedemann-Franz law. Drude got , close by luck: its heat capacity was 100 times too big and its 100 times too small. A metal with S/m at 300 K should have W m⁻¹ K⁻¹; copper is measured at 400.
Thermionic emission. Electrons in the Fermi tail with enough momentum to climb the work function (measured from ) escape: with A m⁻² K⁻². A plot of against gives .
“Electrons in a metal move slowly, at the drift speed.” The drift speed is millimetres per second, but each electron at the Fermi surface moves at m/s even at absolute zero. A current is a tiny imbalance between huge numbers of fast electrons going each way.
“The free electron model explains the sign of the Hall coefficient.” It always gives . Positive in Be, Zn, Cd or Al at high fields comes from hole-like orbits in the band structure.
- Drude: , , , , , .
- Sommerfeld: , (2 to 12 eV), m/s, to K.
- ; 3D ; 2D , ; .
- , ; .
- ; separates electrons from phonons.
- Wiedemann-Franz ; Richardson .
Practise: GATE questions on this lesson
They start easy and climb to top-rank level. More on the GATE Physics practice page.
Next: lesson 7.7 puts the lattice back and shows how gaps open at the zone boundaries. The Quantum statistics plotter draws Fermi-Dirac against Bose-Einstein and Maxwell-Boltzmann. Back to the GATE Physics course.
Going on to CSIR NET? Dielectric and optical properties of solids turns the Drude model into an optical response.
Check yourself
Sources
- N. W. Ashcroft and N. D. Mermin, Solid State Physics (1976), chapters 1 and 2
- C. Kittel, Introduction to Solid State Physics, 8th ed. (2005), chapter 6
- S. H. Simon, The Oxford Solid State Basics (2013), chapters 3 and 4
- GATE Physics (PH) syllabus, solid state physics section, published by the organising institute each year
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Not affiliated with the IITs, IISc or the GATE organising institute. The general aptitude part of GATE is not covered here. Check the official GATE website for the current pattern. All questions are original.