Home / Learn / Exam prep / GATE Physics / Lesson 5.7
All lessons

Module 5: Thermodynamics and statistical physics · Lesson 5.7 · about 45 min

Phase transitions

How matter changes phase: Ehrenfest classification, the Clausius-Clapeyron and Ehrenfest relations, the phase rule, order parameters and symmetry breaking, Landau theory for continuous and first-order transitions, the mean-field Ising model, critical exponents, scaling and universality.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Module 5 · about 45 minutes. By the end you will be able to classify a transition, use the Clapeyron and Ehrenfest equations, set up and minimise a Landau free energy for continuous and first-order cases, solve the mean-field Ising model, and use critical exponents with the scaling relations. Thermodynamic potentials and G minimisation come from the JAM lesson on thermodynamic potentials; the van der Waals critical point is in kinetic theory.

A phase transition is a competition between energy, which favours order, and entropy, which favours disorder. Near a continuous transition the details of the material stop mattering: only dimension and symmetry decide how quantities diverge.

1. Classifying transitions

At a transition the phases coexist with equal Gibbs energy per particle, so G is continuous. Ehrenfest classified transitions by the first derivative of G that jumps:

First order Continuous (second order)
S=−∂G/∂T, V=∂G/∂P jump (latent heat L=TΔS) continuous
CP, κT, α finite on each side jump or diverge
order parameter jumps grows continuously from zero
examples melting, boiling, ferromagnet with reversed field Curie point, critical point, superconductor in zero field, lambda point of ⁴He

Coexistence curves. Equal chemical potentials along a line give the Clausius-Clapeyron equation

dPdT=LTΔv

Ice is less dense than water, so its melting line slopes backwards: dP/dT=3.34×105/(273.15×(−9.1×10−5))=−13.4 MPa/K. For a vapour (ideal, vliquid negligible) it integrates to P∝e−L/RT. For a continuous transition both ΔS and ΔV vanish and their derivatives give the Ehrenfest relations, dP/dT=Δα/ΔκT=ΔCP/(TVΔα).

Phase rule. With C components and P coexisting phases, F=C−P+2 intensive variables are free: for a pure substance a triple point has F=0.

2. Order parameters and Landau theory

An order parameter m is zero in the symmetric (high-T) phase and non-zero in the ordered phase: magnetisation, ρl−ρg, the superconducting gap. Landau expanded the free energy near Tc in powers of m, keeping only terms the symmetry allows (for a ferromagnet, m→−m forbids odd powers):

F(m)=F0+a(T−Tc)m2+bm4−hm,a,b>0
Above Tc
the m² coefficient is positive: one minimum at m = 0
Below Tc
it is negative: two minima at m = ±√(a(Tc − T)/2b); the system picks one (spontaneous symmetry breaking)
Results
β = 1/2; χ = 1/2a(T − Tc) above and 1/4a(Tc − T) below (γ = 1, amplitude ratio 2); at Tc, m ∝ h1/3 (δ = 3); heat capacity jump a²Tc/2b (α = 0)
Physical meaning
The shape of F(m) changes from a bowl to a double well as T crosses Tc. Nothing jumps in F, but its curvature at m = 0 changes sign.

First-order transitions in Landau theory. If a cubic term is allowed (no m→−m symmetry, as for nematic liquid crystals), or if the quartic coefficient is negative with a positive m6 term, a second minimum appears and reaches the height of F(0) before the m2 coefficient vanishes. Then m jumps. For F=α(T−T0)m2−Bm4+Dm6 the transition is at T∗=T0+B2/4αD with a jump m2=B/2D, and there is hysteresis between the spinodals.

3. The Ising model in mean field

The simplest model with a transition: spins si=±1 on a lattice, H=−J∑⟨ij⟩sisj−h∑isi. Replace each neighbour by the average m: every spin feels a field zJm+h, and

m=tanh⁡(zJm+hkT)⇒kTc=zJ (h=0)

Graphically, y=m meets y=tanh⁡(mTc/T) away from zero only when the slope of the tanh at the origin, Tc/T, exceeds 1. Near Tc, expanding the tanh gives m≈3(1−T/Tc), the Landau result; the heat capacity jumps by 32k per spin, and above Tc the susceptibility follows the Curie-Weiss law χ=C/(T−Tc).

Mean-field ordering. In the graphical view the non-zero crossing exists only below Tc. In the m(T) view the mean-field magnetisation (β = 1/2) is compared with Onsager and Yang's exact 2D Ising result (β = 1/8), each against its own Tc.

What mean field gets wrong. It ignores fluctuations, which oppose order. So it overestimates Tc (square lattice: 4J versus Onsager’s exact 2.269J) and predicts ordering in 1D, where the exact transfer-matrix solution shows none: the free energy −kTln⁡(2cosh⁡βJ) is smooth and the correlation length ξ=−a/ln⁡tanh⁡βJ stays finite at every T>0. A domain wall costs only 2J but gains entropy kln⁡N.

4. Critical exponents, scaling and universality

With t=(T−Tc)/Tc:

Exponent Definition Mean field 2D Ising 3D Ising
α `$C \sim t ^{-\alpha}$` 0 (jump)
β m∼(−t)β 1/2 1/8 0.326
γ `$\chi \sim t ^{-\gamma}$` 1
δ m∼h1/δ at Tc 3 15 4.79
ν `$\xi \sim t ^{-\nu}$` 1/2

They are linked by scaling relations that follow from the divergence of the correlation length: Rushbrooke α+2β+γ=2, Widom γ=β(δ−1), and hyperscaling dν=2−α (mean field satisfies it only at d=4, the upper critical dimension).

Universality. Exponents depend only on the dimension, the symmetry of the order parameter and the range of the forces. The liquid-gas critical point and a uniaxial magnet share the 3D Ising exponents; a lattice gas maps exactly onto the Ising model. Discrete symmetries order for d≥2; continuous symmetries need d>2 (Mermin-Wagner).

“A continuous transition has nothing discontinuous about it.” The order parameter and entropy are continuous, but response functions are singular: the heat capacity jumps (mean field) or diverges (3D Ising), and the susceptibility and correlation length diverge. And the free energy is non-analytic at Tc, which is exactly what makes it a phase transition rather than a smooth crossover.

  • First order: S, V, order parameter jump; dP/dT=L/TΔv. Continuous: no latent heat; Ehrenfest relations; singular response functions.
  • Phase rule F=C−P+2.
  • Landau F=a(T−Tc)m2+bm4: m∝(Tc−T)1/2, χ ratio 2, δ=3, ΔC=a2Tc/2b. Cubic or negative quartic term → first order.
  • Mean-field Ising: m=tanh⁡(zJm/kT), kTc=zJ (too high); exact: no transition in 1D, kTc=2.269J on the square lattice.
  • Scaling: α+2β+γ=2, γ=β(δ−1), dν=2−α; universality classes set by dimension and symmetry.

Practise: exam questions on this lesson

They start easy and climb to top-rank level. Check each answer, then read the full solution. More on the GATE practice page.

Module 5 complete. Review the whole module with mixed questions on the GATE practice page. Watch domains form and critical fluctuations grow in fibub’s Ising model simulator, and explore coexistence curves with the phase diagram calculator. Next: Module 6 begins with hydrogen spectra and fine structure.

Going on to CSIR NET? The Ising model and Landau theory adds exact results and more Landau extensions.

Check yourself

1In Landau theory the order parameter below T_c grows as
2Which transition has a latent heat?
3Mean-field theory gives kT_c = zJ for the Ising model. Compared with the exact result, this is

Sources

  • R. K. Pathria and P. D. Beale, Statistical Mechanics, 4th ed. (Academic Press, 2021), chapters 12 and 13
  • K. Huang, Statistical Mechanics, 2nd ed. (Wiley, 1987), chapters 14 to 17
  • J. M. Yeomans, Statistical Mechanics of Phase Transitions (Oxford, 1992), chapters 1 to 5
  • H. E. Stanley, Introduction to Phase Transitions and Critical Phenomena (Oxford, 1971)
  • GATE Physics (PH) syllabus, Statistical Physics section, published by the organising institute each year

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Not affiliated with the IITs, IISc or the GATE organising institute. The general aptitude part of GATE is not covered here. Check the official GATE website for the current pattern. All questions are original.