Module 4: Discovering expansion · Lesson 4.2 · about 15 min
Hubble's law: the farther, the faster
Galaxies move away at speeds proportional to their distance: v = H0 d. How Lemaître and Hubble found it, why Hubble's first value was seven times too big, and the Hubble tension between 67 and 73 km/s per megaparsec.
Module 4 · about 15 minutes. Read first: 4.1 Slipher’s discovery for speeds and 2.6 The distance ladder for distances. Put the two together and a law appears. By the end you will be able to use Hubble’s law to turn a galaxy’s speed into its distance.
1. Speeds plus distances
By the late 1920s astronomers had two lists: Slipher’s speeds and, after Hubble’s Cepheid work on Andromeda, rough distances to a few dozen galaxies. In 1927 the Belgian priest and physicist Georges Lemaître put them together, found that speed grows with distance, and explained it as the expansion of space in Einstein’s theory (Lesson 4.6). His paper was in French in a little-read Belgian journal.
In 1929 Edwin Hubble published a plot of 24 galaxies, speed against distance. The points were scattered, but they rose along a line. With Milton Humason he extended it to much greater distances by 1931. The pattern became famous as Hubble’s law. In 2018 the International Astronomical Union recommended calling it the Hubble-Lemaître law.
2. The law
- v
- how fast a galaxy moves away from us, in km/s (from its redshift: v ≈ cz for nearby galaxies)
- d
- its distance, in megaparsecs (1 Mpc = 3.26 million light-years)
- H0
- the Hubble constant: about 70 km/s for every Mpc of distance. The 0 means "today"
- Physical meaning
- Every megaparsec of space between us and a galaxy adds about 70 km/s to its speed. It is a rate of stretching: about 0.007% per million years.
Worked example. A galaxy’s lines show a redshift z = 0.02, so v ≈ 0.02 × 299,792 ≈ 6,000 km/s. With H0 = 70, its distance is d = 6,000 ÷ 70 ≈ 86 Mpc, about 280 million light-years. Once H0 is known, a single spectrum gives a distance. This is how 3-D maps of millions of galaxies are made.
3. Why the first value was seven times too big
Hubble’s slope was about 500 km/s per Mpc. The trouble was the distances. In 1952 Walter Baade showed there are two kinds of Cepheid star with different brightnesses, and Hubble’s calibration had mixed them up. Allan Sandage then found that some “brightest stars” Hubble had used in far galaxies were really glowing gas clouds. Each fix pushed the distances out and the slope down.
A factor of two, for decades. From the 1960s to the 1990s, one school (Sandage) argued for H0 ≈ 50 and another (Gérard de Vaucouleurs) for about 100. The Hubble Space Telescope was built partly to settle it. Its Key Project, led by Wendy Freedman, reported 72 ± 8 in 2001.
4. The Hubble tension
Now the error bars are a few per cent, and they do not overlap. The distance ladder (Cepheids, then Type Ia supernovae) gives about 73. The Planck satellite’s map of the cosmic microwave background, read with the standard model of cosmology, gives about 67. If both are right, something may be missing from the standard model, perhaps in the early universe. We return to it in Module 12.
“Galaxies are flying away from us because we are in the middle.” The law looks exactly the same from every galaxy. That is the surprise of the next lesson: a universe that stretches evenly has no centre.
- Galaxies recede at speeds proportional to their distance: v = H0 d (the Hubble-Lemaître law).
- Lemaître found it first (1927) and explained it as expanding space; Hubble’s plot (1929) made it famous.
- H0 ≈ 70 km/s per Mpc. Hubble’s 500 was wrong because his distances were about 7 times too small.
- With H0 known, a redshift gives a distance: d = v ÷ H0.
- Today’s two best methods give 67 and 73: the Hubble tension, an open question.
Turn redshifts into distances for real galaxies with the [[redshift-calculator]].
Check yourself
Sources
- E. Hubble (1929), A relation between distance and radial velocity among extra-galactic nebulae, PNAS 15, 168 https://doi.org/10.1073/pnas.15.3.168
- W. L. Freedman et al. (2001), Final results from the Hubble Space Telescope Key Project to measure the Hubble constant, ApJ 553, 47 https://doi.org/10.1086/320638
- A. G. Riess et al. (2022), A comprehensive measurement of the local value of the Hubble constant, ApJ Letters 934, L7 https://doi.org/10.3847/2041-8213/ac5c5b
- Planck Collaboration (2020), Planck 2018 results. VI. Cosmological parameters, A&A 641, A6 https://doi.org/10.1051/0004-6361/201833910
- IAU (2018), Resolution B4 on the Hubble-Lemaître law https://www.iau.org/news/pressreleases/detail/iau1812/
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Numbers are rounded for teaching; measured values come from the sources listed in each lesson. Simulations run in your browser; nothing you type is sent anywhere.