Home / Learn / Science / Sky watching / Lesson 4.5
All lessons

Module 4: Binoculars and telescopes · Lesson 4.5 · about 20 min

Refractors, reflectors and catadioptrics

Telescopes come in three families: refractors use lenses, reflectors use mirrors, and catadioptrics use both. Each trades cost, size, upkeep and image quality differently.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Module 4 · about 20 minutes · read first: 4.1 How lenses and mirrors make an image, 4.2 Aperture: the bucket that catches light · maths: no maths needed. You’ll be able to name the main telescope designs, trace the light path in each, and match a design to what you want to observe.

Telescopes come in three families, refractors with lenses, reflectors with mirrors and catadioptrics with both, and each trades cost, size, upkeep and image quality differently.

1. Why this matters

Telescope shops are full of jargon: achromat, apo, Newtonian, Dob, SCT, Mak, RC. Each name describes how the light is gathered and folded. Knowing the families helps you understand specifications and choose (Lesson 4.7), and the same designs scale up to research telescopes.

2. Three families

Picture: three telescope designs (tap to switch)
Light paths through a telescope design eyepiece objective lens eyepiece (side) main mirrorflat diagonal eyepiece corrector + secondarymain mirror (with hole) fibub.com

Not to scale. Light enters from the left. A refractor bends light with a lens; a Newtonian focuses it with a curved mirror and turns it out of the side with a small flat mirror; a Schmidt-Cassegrain folds the light path back on itself, so a long focal length fits in a short tube.

Refractors (lenses). An achromat pairs two glasses to bring red and blue roughly together; an apochromat (“apo”) uses three elements or special low-dispersion glass for nearly perfect colour. Sharp, high-contrast images, no cooling time, no collimation, but expensive per millimetre of aperture. Small apos are the favourite astrophotography telescope.

Reflectors (mirrors). The Newtonian (Isaac Newton, 1668) uses a parabolic main mirror and a flat diagonal that sends light out of the side of the tube. On a simple swinging base, the Dobsonian (John Dobson, 1960s), it is the cheapest way to get a big aperture. Professional observatories use Ritchey-Chrétien reflectors (two hyperbolic mirrors), as in the Hubble Space Telescope, for sharp, wide, colour-free fields.

Catadioptrics (both). A thin corrector lens at the front plus mirrors. The Schmidt-Cassegrain (SCT) and Maksutov-Cassegrain fold a long focal length into a short tube: compact, easy to carry, good for planets and small objects, with narrower fields.

3. Things every design deals with

  • Central obstruction. Reflectors and catadioptrics have a secondary mirror in the light path. It blocks a little light and moves some light from the Airy disc into the rings, slightly softening contrast on planets. Refractors have none.
  • Cooling. A mirror warmer than the night air creates turbulence inside the tube. Big mirrors need 30 to 60 minutes outside to settle.
  • Collimation. Mirrors must be aligned. Newtonians need a quick check each session; SCTs rarely; refractors almost never.
  • Dew. Exposed lenses and corrector plates fog up on humid nights; dew shields and gentle heaters fix it.

Meet the three families:

Refractor. A lens at the front, eyepiece at the back. Sealed, no setup time, sharp contrast. Good apochromats have no colour fringes but cost a lot per mm of aperture.
Newtonian reflector. A concave mirror at the bottom, a small flat mirror sending light out the side. The most aperture for the money; needs occasional alignment (collimation).
Dobsonian. A Newtonian on a simple rocking box. A 200 mm Dob is the classic first big telescope.
Schmidt-Cassegrain. A thin corrector plate and two mirrors fold a 2,000 mm focal length into a tube 45 cm long. Compact and portable, with a long focal ratio.
The trade. Every design blocks or bends light somewhere: secondary mirrors block 10 to 15% of the area; lenses absorb a little and can show colour.
Maths and principle

Principle: the effective focal length of a two-mirror system depends on how the secondary mirror magnifies the image of the primary.

Equation: if the primary has focal length f1 and the convex secondary magnifies its image by m2 (typically 4 to 5 in an SCT), the system’s effective focal length is

F=m2f1

Central obstruction as a fraction of area: (ds/D)2, where ds is the secondary’s diameter.

Try it: an SCT with a 200 mm f/2 primary (400 mm) and a secondary magnifying 5 times: F=2000 mm, f/10. A 70 mm secondary blocks (70/200)2=12% of the area.

F = m₂ f₁
Effective focal length of a two-mirror telescope.
N = F / D
Focal ratio (f-number): low is wide and fast, high is narrow and slow.
(ds/D)²
Fraction of the aperture blocked by a secondary mirror.
Physical meaning
All three do the same job, gather light and bring it to a focus, but fold the light path differently. Folding with mirrors makes a short tube; a lens keeps the path straight and unobstructed. The best telescope is the one you will actually carry outside.

“Refractors are for beginners and reflectors for experts.” Each suits different uses. A small refractor is a superb travel and imaging scope; a large Dobsonian is a simple beginner’s telescope that shows faint galaxies.

4. Worked example

Two 200 mm telescopes compared. A 200 mm f/6 Newtonian (1,200 mm) and a 203 mm f/10 SCT (2,032 mm).

  • Light grasp and resolution: essentially the same, set by aperture.
  • With a 30 mm eyepiece: Newtonian 40×, SCT 68×. The Newtonian shows a wider field (good for big clusters and nebulae); the SCT reaches high power easily (planets).
  • Tube length: about 1.2 m for the Newtonian, about 0.45 m for the SCT. The SCT is easier to carry and mount; the Newtonian costs less.

5. Practice

More practice (answers below):

  1. Which design would you choose for wide-field photos of large nebulae on a small budget? Why?
  2. What is the main reason refractors stay small?
  3. A 150 mm Newtonian has a 35 mm secondary. What fraction of the light does it block?
Answers
  1. A small apochromatic refractor (sharp, colour-free wide fields, light enough for an affordable tracking mount), or a fast Newtonian with a coma corrector for more aperture.
  2. Big lenses are very expensive to make and can only be held by their edges, so they sag.
  3. (35/150)2=5.4%.
  • Refractors (lenses), reflectors (mirrors), catadioptrics (both).
  • Dobsonian reflectors give the most aperture per dollar.
  • Schmidt-Cassegrains fold a long focal length into a short tube: F = m₂ f₁.
  • Focal ratio N = F/D: low for wide fields, high for planets.

Try it with real numbers: compare focal ratio, field and resolution of different designs with the telescope calculator.

New words: refractor, achromat, apochromat, Newtonian, Dobsonian, Schmidt-Cassegrain, Maksutov, Ritchey-Chrétien, central obstruction, collimation.

Check yourself

1Which design gives the most aperture for the money?
2What is collimation?
3Why does a Schmidt-Cassegrain fit a 2,000 mm focal length into a short tube?

Sources

  • Hecht, E. (2017), Optics, 5th ed., Pearson (thin lens equation, diffraction)
  • Rutten, H. and van Venrooij, M. (1988), Telescope Optics: Evaluation and Design, Willmann-Bell

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Numbers in the examples are made up to show the idea unless a source is given. Simulations run in your browser on made-up data; nothing you type is sent anywhere. Astronomy only: nothing here is astrology.