Home / Learn / Science / Sky watching / Lesson 6.6
All lessons

Module 6: Astrophotography · Lesson 6.6 · about 20 min

Field of view and mosaics

Your camera's field of view decides which targets fit in one frame. Big nebulae and galaxies may need a mosaic of overlapping panels; small galaxies need long focal lengths.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Module 6 · about 20 minutes · read first: 6.1 Cameras, pixels and image scale, 6.5 Tracking, guiding and star trails · maths: small angles. You’ll be able to compute your field of view, decide whether a target fits, and plan a mosaic.

Your camera's field of view decides which targets fit in one frame; big nebulae and galaxies may need a mosaic of overlapping panels, and small galaxies need long focal lengths.

1. Why this matters

Framing is the first creative decision in astrophotography and a practical one in research: survey telescopes trade field for depth, and planning a mosaic is how large areas get covered (the Sloan survey, Astronomy 5.6, is effectively a giant mosaic).

2. Field of view

The field along each side of the sensor is set by its size and the focal length (Lesson 6.1). Some typical fields on an APS-C sensor (23.5 × 15.6 mm):

  • 135 mm lens: about 10° × 6.6°: whole constellations.
  • 500 mm: about 2.7° × 1.8°: Andromeda Galaxy, the Pleiades with nebulosity.
  • 2,000 mm: about 0.67° × 0.45°: small galaxies and planetary nebulae.
Try it: will it fit?
field of view
mosaic needed (15 % overlap)
The target is drawn as an ellipse of its rough size; the rectangle is one frame from your camera. Sizes are approximate visual extents from the Messier catalogue and NASA; long exposures can show more. If the target doesn't fit, a mosaic of overlapping frames covers it.

Things to notice:

  • Andromeda (about 3° long) only fits whole below about 420 mm on APS-C; at longer focal lengths you need a mosaic.
  • A small planetary camera at long focal length suits the Whirlpool Galaxy, not big nebulae.

Plan a mosaic of the North America Nebula (about 2° × 2°):

Your field. A 23.5 mm sensor on a 530 mm refractor: 57.3 × 23.5 / 530 = 2.54° wide.
Width fits. The 2° width fits in one panel across.
Height. The 15.6 mm side gives 1.69°, short of 2°.
Two panels tall. With 15% overlap, each extra panel adds 1.69 × 0.85 = 1.43°: two panels cover 3.1°.
Stitch. Software matches stars in the overlaps and blends the panels into one image.
Maths and principle

Field of view along a side of length L (mm) at focal length F (mm):

θ=2arctan⁡L2F≈57.3∘×LF

Mosaic panels to cover a target W wide with a field θ and overlap fraction o:

n=1+⌈W−θθ(1−o)⌉(or 1 if W≤θ)

and the same for the height. ⌈x⌉ means “round up”.

Try it: a 3.2° × 1° target with a 1.34° × 0.9° field and 15% overlap: across 1+⌈1.86/1.14⌉=3; up 1+⌈0.1/0.765⌉=2: a 3 × 2 mosaic.

3. Worked example

Imaging the Andromeda Galaxy (about 3.2° × 1°) with a 1,000 mm telescope and an APS-C camera.

  • Field: 57.3×23.5/1000=1.35∘ by 57.3×15.6/1000=0.89∘.
  • Panels at 15% overlap: 3 across, 2 up (the 1° height just misses one frame), so 6 panels.
  • Rotating the camera to line the long side of the frame along the galaxy’s long axis reduces wasted sky.
  • With 2 hours per panel, that is 12 hours: a multi-night project. A 400 mm lens fits it in one frame in 2 hours, at lower resolution. A real trade.
θ ≈ 57.3° × L / F
Field of view along a sensor side of L mm.
Overlap o
Shared fraction between panels, for stitching.
n = 1 + ⌈(W − θ) / (θ(1 − o))⌉
Panels needed to cover a target W wide.
Physical meaning
A mosaic is a panorama of the sky, like the phone photos you sweep across a landscape, but taken one patient tile at a time. The overlaps are where the software lines the stars up so the seams vanish.

“A bigger telescope is always better for astrophotography.” Big nebulae like the Veil or Andromeda need wide fields, which short focal lengths give. A long-focus telescope frames only a corner of them unless you build a mosaic.

4. Practice

More practice (answers below):

  1. What is the field of a full-frame sensor (36 mm side) at 200 mm?
  2. How many panels (one direction) cover a 6° strip with a 2.5° field and 20% overlap?
  3. Why do survey telescopes often have very wide fields?
Answers
  1. 57.3×36/200=10.3∘.
  2. 1+⌈3.5/2.0⌉=1+2=3.
  3. To cover large areas of sky quickly: a wide field maps more sky per exposure.
  • Field of view θ ≈ 57.3° × sensor size / focal length.
  • Match focal length to the target’s size.
  • Mosaics cover big targets with overlapping panels (10 to 20% overlap).
  • Panels: n = 1 + ⌈(W − θ)/(θ(1 − o))⌉.

Try it with real numbers: plan panels and overlap for any target with the mosaic planner, and work out field and image scale with the telescope calculator.

New words: field of view, framing, mosaic, overlap, panel.

Check yourself

1An APS-C sensor 23.5 mm wide on a 500 mm telescope sees about how wide a field?
2Why do mosaic panels overlap?
3Which target needs the longest focal length to fill the frame?

Sources

  • Approximate target sizes: SEDS Messier database and NASA

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Numbers in the examples are made up to show the idea unless a source is given. Simulations run in your browser on made-up data; nothing you type is sent anywhere. Astronomy only: nothing here is astrology.