Module 4: Binoculars and telescopes · Lesson 4.3 · about 25 min
Focal length, f-ratio and magnification
Magnification is the telescope's focal length divided by the eyepiece's. The exit pupil and true field follow from it. Learn to pick eyepieces that give bright, wide, sharp views instead of empty magnification.
Module 4 · about 25 minutes · read first: 4.1 How lenses and mirrors make an image, 4.2 Aperture: the bucket that catches light · maths: division. You’ll be able to work out magnification, exit pupil, true field and focal ratio, and choose a sensible set of eyepieces for any telescope.
1. Why this matters
The same telescope can show a whole star cluster or a close-up of one crater on the Moon, depending on the eyepiece. Picking eyepieces well matters more than most accessories, and the same numbers (focal length, focal ratio, field) carry straight over to cameras in Module 6.
2. The numbers
- Focal length of the telescope (Lesson 4.1), and of the eyepiece.
- Focal ratio , the telescope’s “f-number”. f/4 to f/6 is “fast” (short tube, wide fields), f/10 and above “slow” (long focal length, high power is easy).
- Magnification : swap eyepieces to change it.
- Exit pupil : the width of the beam of light leaving the eyepiece. It should fit your eye’s pupil.
- True field: the patch of sky you see, about the eyepiece’s apparent field (its advertised angle, often 50° to 82°) divided by .
Things to notice:
- A long-focal-length eyepiece gives low power, a big exit pupil and a wide true field, ideal for finding objects and for big clusters.
- Short eyepieces give high power: the Moon overflows the field, and the image dims as the exit pupil shrinks.
Try three eyepieces on a 200 mm f/6 telescope (focal length 1,200 mm):
Maths and principle
Magnification:
Exit pupil (in mm):
The second form shows that the exit pupil depends only on the eyepiece and the focal ratio: a 10 mm eyepiece on any f/5 telescope gives a 2 mm exit pupil.
True field: .
Useful range: lowest power about (7 mm exit pupil), highest about in mm (0.5 mm exit pupil), and the air usually limits you to 200× to 300× whatever the aperture.
Try it: a 200 mm f/6 (1,200 mm) Dobsonian: lowest useful power (a 41 mm eyepiece); highest (a 3 mm eyepiece).
3. A starter set of eyepieces
Aim for exit pupils of roughly 5 mm (wide views, finding), 2 to 3 mm (most galaxies and clusters), 1 mm (planets, double stars, planetary nebulae) and 0.5 to 0.7 mm (the Moon and planets on the best nights). On an f/5 telescope that means eyepieces of about 25 mm, 12 mm, 5 mm and 3 mm; on an f/10 telescope, twice those focal lengths.
- M = F / fe
- Magnification: telescope focal length over eyepiece focal length.
- dexit = D / M
- Exit pupil: width of the beam leaving the eyepiece.
- True field ≈ apparent field / M
- How much sky you see.
- Physical meaning
- The telescope makes a small image at its focus; the eyepiece is a magnifying glass for that image. A short eyepiece is a stronger magnifying glass. But the light is fixed by the aperture, so the more you spread it, the dimmer each part gets.
“More magnification always shows more detail.” Above about 2× the aperture in mm, or whatever the air allows, the image only gets bigger, dimmer and blurrier. Experienced observers spend most of their time at low and medium power.
4. Worked example
A 127 mm f/12 Maksutov (1,500 mm) with a 25 mm eyepiece of 52° apparent field.
- Magnification: .
- Exit pupil: mm.
- True field: : the full Moon fits with room to spare, but the Pleiades (about 2°) do not.
The longest focal length eyepiece that fits a standard 1.25-inch barrel shows at most about 0.9° on this telescope, which is why such telescopes are loved for the Moon and planets but not for big star fields.
5. Practice
More practice (answers below):
- What eyepiece gives 50× on an 800 mm telescope?
- A 100 mm f/6 telescope with a 6 mm eyepiece: what are the magnification and exit pupil?
- Why does a magnification of 600× on a 70 mm telescope show only a dim blur?
Answers
- mm.
- mm, , exit pupil mm.
- The useful maximum is about . Beyond that the exit pupil is under 0.12 mm, so the image is very dim, and it only enlarges the blur from diffraction and the air: “empty magnification”.
- M = F / fe: swap eyepieces to change power.
- Exit pupil = D / M = fe / N; 2 to 6 mm suits most targets.
- True field ≈ apparent field / M.
- Useful magnification is about D/7 to 2D (D in mm).
Try it with real numbers: test any telescope and eyepiece combination with the telescope calculator.
New words: focal ratio (f-number), magnification, exit pupil, apparent field, true field, empty magnification.
Check yourself
Sources
- Hecht, E. (2017), Optics, 5th ed., Pearson (thin lens equation, diffraction)
- Rutten, H. and van Venrooij, M. (1988), Telescope Optics: Evaluation and Design, Willmann-Bell
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Numbers in the examples are made up to show the idea unless a source is given. Simulations run in your browser on made-up data; nothing you type is sent anywhere. Astronomy only: nothing here is astrology.