Module 4: Binoculars and telescopes · Lesson 4.1 · about 20 min
How lenses and mirrors make an image
A telescope's main lens or mirror bends parallel starlight to a single point, the focus. The distance to it is the focal length. Learn the lens equation and why mirrors took over big telescopes.
Module 4 · about 20 minutes · read first: 1.7 How bright is it? The magnitude scale, Astronomy 1.1 The electromagnetic spectrum and the atmosphere’s windows · maths: algebra with fractions. You’ll be able to explain how a lens and a curved mirror focus light, use the lens equation, and say why big telescopes use mirrors.
1. Why this matters
Every telescope, camera lens and pair of binoculars works by forming an image at a focus. Knowing where that image forms explains focal length, why a camera needs “back focus” (the distance from the last optic to the sensor), and why you sometimes can’t reach focus with a new accessory.
2. Bending light
Light changes direction when it passes from air into glass at an angle (refraction), because it travels more slowly in glass. A lens with curved faces bends rays near its edge more than rays near its centre, so parallel rays come together at one point: the focal point. A concave mirror does the same by reflection: its curve turns every parallel ray towards the focal point.
The distance from the lens or mirror to the focal point is the focal length .
Things to notice:
- With the slider at the right end (a star), the rays arrive parallel and meet at F: a point image.
- Move the object closer: the image moves away from the lens, gets bigger, and stays upside down. At 2 f, image and object are the same size.
Watch starlight come to a focus:
Maths and principle
Thin lens (or mirror) equation: an object at distance makes an image at distance where
Magnification of the image: (the minus sign means upside down).
For a star , so and the image forms exactly at the focus.
For a mirror, a spherical or parabolic mirror of radius of curvature has . Telescopes use a parabola, which sends every parallel ray to exactly the same point; a sphere blurs the edge rays (spherical aberration).
Try it: a 1,000 mm lens focused on a tree 20 m away: , so mm. The image is 52.6 mm behind the star focus, which is why the focuser needs extra travel for daytime targets.
3. Lenses versus mirrors
Lenses split colours slightly, because glass bends blue light more than red (chromatic aberration). Pairs or triplets of different glasses (achromats, apochromats) correct most of it. A lens can only be held at its edge, and a big one sags; the largest refractor ever used for research is 1.02 m across (Yerkes Observatory, 1897).
Mirrors reflect all colours to the same focus and can be supported across their whole back. Today’s largest telescopes have mirrors 8 to 10 m across, or many hexagonal segments acting as one mirror, and the Extremely Large Telescope under construction in Chile will be 39 m.
- f
- Focal length: distance from lens or mirror to the focus for parallel light.
- 1/u + 1/v = 1/f
- Lens equation: object distance u, image distance v.
- f = R/2
- A mirror's focal length is half its radius of curvature.
- Physical meaning
- A lens works like a crowd walking from a pavement onto sand at an angle: whoever hits the sand first slows first, so the whole line turns. A curved lens turns each part of the light by just the right amount to meet at one point. A mirror does it by bouncing instead of slowing.
“A telescope’s job is to magnify.” Its main job is to collect light and form a sharp image. Magnification comes from the eyepiece and is easy to change; the light-gathering lens or mirror is what makes faint things visible.
4. Worked example
Where is the focus of a 150 mm f/5 mirror? The focal ratio (Lesson 4.3) is focal length ÷ aperture, so mm. The image of the Moon (0.52° across) at the focus has size
That 6.8 mm Moon image is what the eyepiece magnifies, or what falls on a camera sensor.
5. Practice
More practice (answers below):
- An object is 4 f from a lens. Where is the image and how big is it?
- A 2,000 mm telescope images the Moon. How big is the Moon’s image at the focus?
- Why does a single simple lens show a coloured halo around bright stars?
Answers
- , f; magnification , upside down.
- mm.
- Glass bends each colour by a different amount, so each colour has a slightly different focus (chromatic aberration).
- Lenses bend (refract) light; mirrors reflect it to a focus.
- Focal length is where parallel starlight meets: 1/u + 1/v = 1/f.
- Simple lenses suffer colour fringes (chromatic aberration); mirrors do not.
- Big telescopes use parabolic mirrors.
Try it with real numbers: work out focal ratio, image scale and back focus for your own optics with the telescope calculator and the backfocus calculator.
New words: refraction, focal point, focal length, lens equation, chromatic aberration, spherical aberration, parabolic mirror.
Check yourself
Sources
- Hecht, E. (2017), Optics, 5th ed., Pearson (thin lens equation, diffraction)
- Rutten, H. and van Venrooij, M. (1988), Telescope Optics: Evaluation and Design, Willmann-Bell
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Numbers in the examples are made up to show the idea unless a source is given. Simulations run in your browser on made-up data; nothing you type is sent anywhere. Astronomy only: nothing here is astrology.