Module 6: Physics · Lesson 6.2 · about 20 min
Physics: current electricity
Drift velocity, Ohm's law and resistivity, series and parallel resistors, cells with internal resistance, Kirchhoff's rules and the Wheatstone bridge, with a live circuit problem.
Module 6 · about 20 minutes. By the end you will solve any resistor network in CUET and handle cells with internal resistance.
Everyday picture: a crowded corridor. People (electrons) drift slowly towards the exit, bumping into others all the time, yet the moment the doors open the whole corridor starts moving at once. That is why a lamp lights instantly even though electrons drift at only about a millimetre a second.
1. Ohm’s law and resistivity
- ρ (resistivity)
- a property of the material, not the shape. Copper ~1.7 × 10⁻⁸ Ω m; it rises with temperature for metals and falls for semiconductors.
- v_d (drift velocity)
- the slow average speed of electrons along the wire, set by the field and the time between collisions: v_d = eEτ/m.
- Physical meaning
- a long thin wire is like a long thin straw: harder to push through. That is why heater wires are thin and power cables are thick.
2. Combining resistors
3. Cells and Kirchhoff’s rules
A real cell of emf ε has internal resistance r, so the terminal voltage is V = ε − Ir and the current is I = ε/(R + r). Cells in series add emfs and resistances; n identical cells in parallel keep the emf ε and give resistance r/n.
| Rule | Says | Conserves |
|---|---|---|
| Junction | Σ I in = Σ I out | charge |
| Loop | Σ (emf) = Σ (IR) around any closed loop | energy |
| Wheatstone bridge | balanced when P/Q = R/S | used in the metre bridge to find an unknown resistance |
| Power | P = VI = I²R = V²/R | the rate at which electrical energy turns to heat |
“A battery supplies a fixed current.” A battery supplies a (nearly) fixed emf. The current depends on what you connect: I = ε/(R + r). A short circuit (R ≈ 0) gives the largest current, ε/r, and heats the cell.
4. Practice
- V = IR, R = ρL/A; stretching a wire n times raises R by n².
- Series add R; parallel add 1/R.
- Terminal voltage V = ε − Ir; I = ε/(R + r).
- Kirchhoff: junction (charge), loop (energy). Bridge balanced at P/Q = R/S.
Check yourself
Sources
- NCERT, Physics Part I (Class 12), Current Electricity
- National Testing Agency, CUET (UG) Physics syllabus https://cuet.nta.nic.in/ (checked 2026-11-22)
- Questions: original fibub writing for this course
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. The exam pattern follows the NTA CUET (UG) information bulletin as checked on 2026-11-22: check cuet.nta.nic.in for the current year. fibub is a free independent site, not part of NTA; every question here is original. Practice runs in your browser and nothing you answer is sent anywhere.