Home / Learn / Exam prep / CUET (UG) prep / Lesson 7.2
All lessons

Module 7: Chemistry · Lesson 7.2 · about 22 min

Chemistry: electrochemistry

Galvanic cells, standard electrode potentials, the Nernst equation, Gibbs energy and emf, conductance and Kohlrausch's law, electrolysis, batteries and corrosion, with a live cell emf problem.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Module 7 · about 22 minutes. By the end you will build a cell from E° values, use the Nernst equation and Faraday’s laws, and explain conductance.

A redox reaction moves electrons. Put the oxidation and the reduction in separate beakers joined by a wire and a salt bridge, and the electrons must travel through the wire: that flow is electricity.

Everyday picture: a water tank on a roof. The higher the tank (the bigger the difference in E°), the harder the water pushes through the pipe. A cell’s voltage is the “height difference” between the two electrodes’ tendency to take electrons.

1. Cells and electrode potentials

Anode (−): Zn → Zn²⁺ + 2e⁻. Zinc dissolves.
Cathode (+): Cu²⁺ + 2e⁻ → Cu. Copper plates out.
Salt bridge (KCl or KNO₃ in agar) lets ions move to keep each beaker neutral, completing the circuit.
Notation: Zn | Zn²⁺ (1 M) || Cu²⁺ (1 M) | Cu. Anode on the left.
emf: E° = E°cathode − E°anode = 0.34 − (−0.76) = 1.10 V.

Standard potentials are measured against the standard hydrogen electrode (0 V). The more positive E°, the stronger the oxidising agent (F₂ +2.87 V); the more negative, the stronger the reducing agent (Li −3.05 V).

2. Nernst equation and Gibbs energy

E=E∘−0.0591nlog⁡Q  (298 K)ΔG∘=−nFE∘ΔG∘=−2.303RTlog⁡K
Q
reaction quotient, products over reactants (pure solids left out). For the Daniell cell Q = [Zn²⁺]/[Cu²⁺].
F
Faraday constant, 96,500 C per mole of electrons.
Physical meaning
as the cell runs, Q grows and E falls; at equilibrium E = 0 and the battery is "dead".

3. Conductance and electrolysis

Idea Formula or fact
Conductivity κ κ = G × (l/A), cell constant l/A
Molar conductivity Λ_m = κ × 1000 / C (S cm² mol⁻¹)
Strong electrolyte Λ_m = Λ°_m − A√C (Debye-Hückel-Onsager), falls gently with √C
Kohlrausch’s law Λ°_m = sum of the ions’ limiting conductivities; gives Λ° for weak electrolytes and α = Λ_m/Λ°_m
Faraday’s first law mass deposited m = (M/nF) × I × t
Batteries dry cell, mercury cell (primary); lead storage, Ni-Cd (secondary); H₂-O₂ fuel cell
Corrosion rusting of iron is electrochemical; galvanising (zinc coat) protects it sacrificially

“E° doubles if you double the reaction.” E° is an intensive property, like temperature. Multiplying a half-equation by 2 changes ΔG° but not E°.

4. Practice

  • Anode oxidation (−), cathode reduction (+) in a galvanic cell.
  • E°cell = E°cathode − E°anode; positive means spontaneous.
  • Nernst: E = E° − (0.0591/n) log Q; ΔG° = −nFE°.
  • Λ_m = 1000κ/C; Kohlrausch adds ionic conductivities.
  • m = MIt/(nF).

Check yourself

1In a galvanic cell, oxidation happens at the:
2ΔG° and E°cell are related by:
3On dilution, the molar conductivity of a weak electrolyte:

Sources

  • NCERT, Chemistry Part I (Class 12), Electrochemistry
  • National Testing Agency, CUET (UG) Chemistry syllabus https://cuet.nta.nic.in/ (checked 2026-11-22)
  • Questions: original fibub writing for this course

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. The exam pattern follows the NTA CUET (UG) information bulletin as checked on 2026-11-22: check cuet.nta.nic.in for the current year. fibub is a free independent site, not part of NTA; every question here is original. Practice runs in your browser and nothing you answer is sent anywhere.