Home / Learn / Exam prep / SAT prep / Lesson 2.4
All lessons

Module 2: Algebra · Lesson 2.4 · about 16 min

Linear inequalities

Solve inequalities like equations, with the one rule that flips the sign, graph them as shaded regions, and turn "at most" and "at least" word problems into inequalities.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Module 2 · about 16 minutes · read first: 2.1, 2.2. By the end you will solve inequalities, read and draw their graphs, and model “at most” and “at least” situations.

An inequality is solved just like an equation, with one extra rule: multiply or divide by a negative number and the sign flips. The answer is not one number but a whole range.

1. Why the sign flips

5 > 2 is true. Multiply both sides by −1 and you get −5 and −2, but −5 is less than −2. Multiplying by a negative mirrors the number line, so “bigger” and “smaller” swap. That is the only new rule.

Solve: 7 − 3x ≥ 19.
Subtract 7 from both sides: −3x ≥ 12.
Divide by −3. It is negative, so flip the sign: x ≤ −4.
Check with x = −5 (should work): 7 + 15 = 22 ≥ 19 ✓. Check with x = 0 (should fail): 7 ≥ 19 ✗.

2. Words into symbols

Words Symbol
at most, no more than, maximum, cannot exceed ≤
at least, no less than, minimum ≥
more than, greater than >
fewer than, less than <

Whole-number answers: if the answer is “x ≤ 13.6 tickets”, the greatest number of tickets is 13 (round down, or you go over budget). If “at least 7.2 hours” are needed, you need 8 (round up).

3. Inequalities on a graph

An inequality in x and y, like y < −x + 2, is a region: every point on one side of the line.

Shade above for "y >" or below for "y <". A solid edge includes the line (≤, ≥); a dashed edge leaves it out (<, >).

A system of inequalities is the overlap of two shaded regions. To check whether a point is a solution, put it into both inequalities.

<, >
strict: the boundary is not included (dashed line, open circle)
≤, ≥
the boundary is included (solid line, filled circle)
Physical meaning
Real limits are inequalities: a lift that can carry at most 1,000 kg, a grade you need at least 70 for. The solution set is every choice that stays within the limit.

“I only flip the sign when there is a minus in the question.” You flip only when you multiply or divide both sides by a negative number. Subtracting a number, even a negative one, never flips the sign.

4. How the SAT asks it

  • Solve, then pick the greatest or least integer that fits.
  • Turn a budget or limit into an inequality (pick the right one of four).
  • Which point satisfies a system of inequalities (test each option).
  • Read an inequality from a graph: slope, intercept, shading side and solid or dashed.

Practice set

Ten questions on this lesson, from warm-up to hard, in the SAT’s own formats (four options or a typed answer). Press New numbers for a fresh set; every question has a full worked solution.

  • Solve like an equation; flip the sign when you multiply or divide by a negative.
  • “At most” is ≤, “at least” is ≥; round whole-number answers in the direction that stays within the limit.
  • A two-variable inequality is a shaded half-plane; dashed means strict, solid means included.
  • A point solves a system only if it makes every inequality true.

Check yourself

1Solve −2x + 5 > 11.
2Which words mean ≤?
3On a graph, what does a dashed boundary line mean?

Sources

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. SAT is a trademark of the College Board, which is not involved with and does not endorse fibub. Every question here is original. Test details were checked on the College Board's website on 22 November 2026; check the official source before test day.