Road trip planner: driving time, breaks, fuel stops, cost and arrival time

Plan a drive from legs with distance and average speed: total time with breaks, fuel stops from your tank size, fuel cost, tolls and the time you will arrive.

Keep it one tap away for everyday use.

Bookmark Road trip?

Press Ctrl + D now. Your browser opens its own bookmark box, where you choose the name and folder.

  1. Legs
  2. Breaks
  3. Fuel
  4. Arrival
Nothing is uploadedWorks offline once open

Legs

Split the trip into legs where your average speed differs, for example a motorway leg and a town leg.

Fuel

Fuel stops assume you start with a full tank and refill when only the reserve is left. A fuel stop that you make during a break still adds the minutes here, so lower them to zero if you refuel on your break. For the cost of one drive see Fuel cost.

Estimates only: traffic, weather, roadworks and rest rules for professional drivers will change real times. Take a break whenever you feel tired. Nothing you type leaves this page.

What it does

Maps give you a time for the road. This tool adds what maps leave out: the breaks you need, the stops to refuel and what the whole trip will cost. You say how far each leg is and how fast you expect to go, how often you stop and how thirsty your vehicle is.

You get the total time, the fuel stops, the fuel and toll cost, and the time you will arrive from your start time. For a single drive look at fuel cost, to share the bill between travellers use trip splitter, and vehicle routing helps plan stops for many deliveries.

How to use it

  1. Enter each leg’s distance and your average speed on it. Use the add button for more legs.
  2. Set how often you take a break and for how long.
  3. Choose your fuel economy unit and type the economy, tank size, fuel price and any tolls.
  4. Pick the start time and read the result.

What each setting does

  • Break every / Break length: a break is added after each full block of driving. A trip of exactly 6 hours with a break every 2 hours has 2 breaks, not 3, because you are already there.
  • Tank size and Keep in reserve: the tool assumes you start with a full tank and refuel when only the reserve is left. The number of stops is how many refills the trip needs.
  • Minutes per fuel stop: added to the total time for each stop. Set it to 0 if you refuel during a break.

Worked example

600 km at 80 km/h is 7 h 30 m of driving. With a 15 minute break every 2 hours you stop after 2, 4 and 6 hours: 3 breaks, 45 minutes. The total is 8 h 15 m, so leaving at 08:00 you arrive at 16:15. At 7 L per 100 km you need 42 L, which fits a 50 L tank with no fuel stop, and at 1.50 a litre the fuel costs 63.00.

FAQs

What average speed should I use? Use your real average, not the speed limit. Town, hills and traffic pull it down; 70 to 80 km/h is common for mixed roads.

Does this follow rest rules for lorry drivers? No. Professional drivers have legal limits on hours; check the official rules for your region.

Is the arrival time my local time? It is the start time you typed plus the trip time, so if you cross a time zone, adjust by hand.

Where the numbers come from

  • Driving time = distance / average speed for each leg. A break is added after every full block of driving hours (none at the very end). Fuel = distance x economy; conversions: 1 mile = 1.609344 km, 1 US gallon = 3.785411784 L, 1 UK gallon = 4.54609 L. Drawings are fibub's own.

Standard scientific values, such as constants, atomic weights and melting points, are facts found in every textbook; we name where ours were checked. If you are an author or publisher and want a value, a credit or a table changed or removed, tell us and we will act quickly.

Last updated 2026-11-10.

Change log for Road trip

  1. Vehicle tools take codes T890-T911 (the block the coordinator gave this stream) Details on GitHub
  2. Add real-mileage, car-depreciation, car-affordability, road-trip tools Details on GitHub

Every change to fibub

Related tools