Waves and sound

Class 11 · 202 questions and templates for Medical entrance (NEET), in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Waves and sound.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. NATWarm-up

    A sound source of frequency 500 Hz produces waves of wavelength 0.68 m in air. Find the speed of the waves (in ms−1).
    Answer and solution

    Answer: 340 m/s

    v=fλ=500×0.68=340 ms−1.
  2. MCQWarm-up

    Sound waves in air are
    1. transverse
    2. longitudinal
    3. transverse and longitudinal both
    4. electromagnetic
    Answer and solution

    Answer: B

    Air cannot sustain a shear, so only compressions and rarefactions along the direction of travel exist: sound in air is longitudinal.
  3. MCQWarm-up

    Sound travels fastest in
    1. steel
    2. air
    3. water
    4. vacuum
    Answer and solution

    Answer: A

    Speed is v=elastic modulus/density. Solids have a much larger modulus: about 5000 m/s in steel, 1500 m/s in water, 340 m/s in air. Sound cannot travel through a vacuum.
  4. NATWarm-up

    Two tuning forks of frequencies 256 Hz and 260 Hz are sounded together. How many beats are heard per second?
    Answer and solution

    Answer: 4 Hz

    Beat frequency =|f1−f2|=4 beats per second.
  5. MCQWarm-up

    A source of sound moves towards a stationary listener. The frequency heard is
    1. lower than the source frequency
    2. the same as the source frequency
    3. zero
    4. higher than the source frequency
    Answer and solution

    Answer: D

    The source follows its own waves, so the wavelength between source and listener is shortened. With the speed of sound unchanged, the frequency rises: f′=fv/(v−vs).
  6. MCQWarm-up

    A pipe closed at one end produces
    1. all harmonics
    2. only even harmonics
    3. only odd harmonics of its fundamental
    4. only the fundamental
    Answer and solution

    Answer: C

    The closed end is a node and the open end an antinode. This allows L=λ/4,3λ/4,5λ/4…, so the frequencies are f,3f,5f….
  7. MCQWarm-up

    The SI unit of intensity of a wave is
    1. Wm−1
    2. Wm−2
    3. Jm−1
    4. Wm2
    Answer and solution

    Answer: B

    Intensity is power per unit area: watt per square metre.
  8. MCQWarm-up

    A path difference of one wavelength between two waves corresponds to a phase difference of
    1. 2π
    2. π
    3. π/2
    4. 4π
    Answer and solution

    Answer: A

    Phase difference =2πλ×path difference=2πλ×λ=2π.
  9. MCQWarm-up

    In a standing wave on a string, a point of zero displacement at all times is called
    1. an antinode
    2. a crest
    3. a compression
    4. a node
    Answer and solution

    Answer: D

    Nodes are points where the two travelling waves always cancel. Antinodes are points of largest amplitude.
  10. NATWarm-up

    A stretched string has tension 100 N and mass per unit length 0.01 kgm−1. Find the speed of a transverse wave on it (in ms−1).
    Answer and solution

    Answer: 100 m/s

    v=T/μ=100/0.01=104=100 ms−1.
  11. MCQWarm-up

    When the temperature of air rises, the speed of sound in it
    1. decreases
    2. stays the same
    3. increases
    4. first increases and then decreases
    Answer and solution

    Answer: C

    v=γRT/M rises with the absolute temperature. At room temperature it increases by about 0.6 m/s for each degree.
  12. NATWarm-up

    A string fixed at both ends has length 0.5 m, and waves travel on it at 200 ms−1. Find the frequency of its fundamental mode (in Hz).
    Answer and solution

    Answer: 200 Hz

    For the fundamental λ=2L=1 m. f=v/λ=200/1=200 Hz.
  13. MCQWarm-up

    Transverse mechanical waves cannot pass through the body of a gas or a liquid because
    1. their density is too low
    2. gases and liquids cannot support a shear (they have no rigidity)
    3. the temperature is too high
    4. they absorb all waves
    Answer and solution

    Answer: B

    A transverse wave needs a restoring force against sideways shear. Fluids do not have a shear modulus. Only longitudinal (pressure) waves travel through them.
  14. NATWarm-up

    A sound of intensity 10−6 Wm−2 falls on a surface. Find its intensity level in dB (I0=10−12 Wm−2).
    Answer and solution

    Answer: 60 dB

    β=10log10⁡(I/I0)=10log10⁡(106)=60 dB.
  15. MCQWarm-up

    A wave is described by y=Asin⁡(ωt−kx). It travels in
    1. the positive x direction
    2. the negative x direction
    3. the y direction
    4. no fixed direction
    Answer and solution

    Answer: A

    Points of constant phase satisfy ωt−kx= constant, so x=(ω/k)t+ constant. The pattern moves to larger x with speed ω/k.
  16. MCQWarm-up

    The pitch of a musical note depends mainly on its
    1. amplitude
    2. speed in air
    3. waveform quality only
    4. frequency
    Answer and solution

    Answer: D

    Pitch is the frequency we perceive. Loudness depends on intensity (amplitude), and quality (timbre) on the mix of harmonics.
  17. MCQWarm-up

    The angular wave number k of a wave of wavelength λ is
    1. λ/2π
    2. 2πλ
    3. 2π/λ
    4. 1/λ
    Answer and solution

    Answer: C

    k=2π/λ in rad m−1. Do not confuse it with the (spectroscopic) wave number 1/λ.
  18. MCQWarm-up

    A pulse on a string is reflected from a fixed end. The reflected pulse is
    1. upright with no phase change
    2. inverted (a phase change of π)
    3. turned to half its size
    4. absorbed completely
    Answer and solution

    Answer: B

    The fixed end exerts a downward force on an upward pulse, producing an inverted reflection. At a free end the reflection is upright.
  19. NATStandard

    A wave on a string is y=5sin⁡(200t−0.5x) (SI units, y in mm). Find the speed of the wave (in ms−1).
    Answer and solution

    Answer: 400 m/s

    Compare with y=Asin⁡(ωt−kx): ω=200 rads−1, k=0.5 radm−1. v=ω/k=400 ms−1.
  20. NATStandard

    A transverse wave has amplitude 2 mm and frequency 100 Hz. Find the maximum speed of a particle of the medium (in ms−1, 3 decimals).
    Answer and solution

    Answer: 1.257 m/s (±0.003)

    vp,max=Aω=0.002×2π×100=1.257 ms−1. This is the speed of particle vibration, not of the wave.

    Why people get this wrong: Particle speed and wave speed are different things.

  21. NATStandard

    A wave of wavelength 2 m travels along a string. Find the phase difference (in degrees) between two points 0.5 m apart along the string.
    Answer and solution

    Answer: 90 °

    Δϕ=2πλΔx=2π2×0.5=π2, which is 90°.
  22. NATStandard

    A string of mass 20 g and length 2 m is stretched with a tension of 40 N. Find the speed of a transverse wave on it (in ms−1, 1 decimal).
    Answer and solution

    Answer: 63.2 m/s (±0.1)

    μ=0.02/2=0.01 kgm−1. v=T/μ=40/0.01=4000=63.2 ms−1.

    Why people get this wrong: Use mass per unit length, not the total mass.

  23. MCQStandard

    The tension in a stretched string is made four times. The fundamental frequency of the string becomes
    1. twice
    2. four times
    3. 2 times
    4. half
    Answer and solution

    Answer: A

    f=12LT/μ∝T. Four times the tension gives 4=2 times the frequency.
  24. NATStandard

    The speed of sound in air at 0°C is 332 ms−1. Find its value at 27°C (in ms−1, 1 decimal).
    Answer and solution

    Answer: 348 m/s (±0.3)

    v∝T with T in kelvin: v27=332300/273=332×1.0483=348.0 ms−1.

    Why people get this wrong: Use kelvin, not °C.

  25. NATStandard

    Air has pressure 1.013×105 Pa and density 1.29 kgm−3 at 0 °C, and γ=1.4. Find the speed of sound using Laplace's correction (in ms−1, nearest whole number).
    Answer and solution

    Answer: 332 m/s (±1)

    Newton's formula gives P/ρ=1.013×105/1.29=280 m/s, too low. Laplace: the compressions are adiabatic, so v=γP/ρ=1.4×280.2=331.5≈332 ms−1.

    Why people get this wrong: The factor is γ.

  26. NATStandard

    The intensity level at 10 m from a small source is 80 dB. Find the level at 20 m (in dB, 1 decimal; ignore absorption).
    Answer and solution

    Answer: 74 dB (±0.1)

    I∝1/r2: doubling the distance gives I/4. Δβ=10log10⁡(1/4)=−6.02 dB. So β=80−6.0=74.0 dB.

    Why people get this wrong: The level does not fall to a quarter, it falls by 6 dB.

  27. NATStandard

    Two identical sources each produce a level of 60 dB at a point. Find the level when both operate together at that point (in dB, 1 decimal; incoherent sources).
    Answer and solution

    Answer: 63 dB (±0.1)

    Intensities add: I=2I1. β=60+10log10⁡2=63.0 dB. Levels in dB do not add directly.
  28. MCQStandard

    Sound A is 20 dB higher in level than sound B. The ratio of their intensities IA/IB is
    1. 20
    2. 2
    3. 10
    4. 100
    Answer and solution

    Answer: D

    Δβ=10log10⁡(IA/IB)=20⇒IA/IB=102=100. Every 10 dB is a factor of 10 in intensity.
  29. MCQStandard

    Two coherent sources vibrate in phase. At a point where the path difference is 1.5λ, the interference is
    1. constructive
    2. neither, intensity is the sum
    3. destructive
    4. cannot be said
    Answer and solution

    Answer: C

    Constructive needs Δ=nλ; destructive needs (n+12)λ. 1.5λ=(1+12)λ is destructive.
  30. NATStandard

    Two coherent waves have amplitudes in the ratio 3 : 1. Find the ratio Imax/Imin.
    Answer and solution

    Answer: 4

    I∝A2. ImaxImin=(A1+A2)2(A1−A2)2=4222=4.

    Why people get this wrong: Amplitudes add; intensities then follow by squaring.

← All topics