Fluids: pressure, flow, viscosity and surface tension
Class 11 · 252 questions and templates for Medical entrance (NEET), in order from warm-up to top rank. Check each answer, then read the full solution.
New to this topic? Read the lesson first: Fluids: pressure, flow, viscosity and surface tension.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
NATWarm-up
A force of 600 N acts normally on a surface of area . Find the pressure (in kPa).Answer and solution
Answer: 20 kPa
Pa kPa. -
MCQWarm-up
The SI unit of pressure is- newton
- pascal ()
- joule
Answer and solution
Answer: B
Pressure is force per unit area: , called the pascal (Pa). is the unit of surface tension, and joule is the unit of energy. -
MCQWarm-up
The pressure due to a liquid of density at depth (gauge pressure) isAnswer and solution
Answer: A
The liquid column above a unit area has weight . -
MCQWarm-up
Pascal's law states that pressure applied to an enclosed fluid is- transmitted only in the direction of the force
- reduced as it travels
- transmitted only to the bottom of the container
- transmitted undiminished to every part of the fluid and the walls
Answer and solution
Answer: D
Pressure (not force) is passed on equally in all directions. This is how hydraulic lifts and brakes work. -
MCQWarm-up
A hydraulic lift multiplies force because- energy is created in the liquid
- the liquid is compressed
- the same pressure acts on a larger area at the output piston
- the output piston moves farther than the input piston
Answer and solution
Answer: C
, so . No energy is created: the large piston moves a smaller distance, so work out work in. -
MCQWarm-up
A body immersed in a fluid experiences an upward force equal to- the weight of the body
- the weight of the fluid displaced
- the volume of the body
- the density of the fluid
Answer and solution
Answer: B
This is Archimedes' principle: . -
MCQWarm-up
A solid floats in a liquid if its average density is- less than or equal to that of the liquid
- greater than that of the liquid
- more than twice that of the liquid
- unrelated to the liquid's density
Answer and solution
Answer: A
If the body is less dense, buoyancy at full immersion () exceeds its weight (), so it rises until the submerged part displaces its weight. -
MCQWarm-up
Standard atmospheric pressure is about- Pa
- Pa
- Pa
Answer and solution
Answer: D
One atmosphere is 760 mm of mercury Pa. Check: Pa. -
MCQWarm-up
Gauge pressure is- the absolute pressure plus the atmospheric pressure
- the pressure of the atmosphere only
- the absolute pressure minus the atmospheric pressure
- the pressure in a perfect vacuum
Answer and solution
Answer: C
A tyre gauge reads the excess over the atmosphere: . -
MCQWarm-up
The SI unit of the coefficient of viscosity is- (Pa s)
Answer and solution
Answer: B
so with unit Pa s. -
MCQWarm-up
The SI unit of surface tension is- N m
Answer and solution
Answer: A
Surface tension is force per unit length of a line on the surface: (equivalently ). -
NATWarm-up
Water flows at in a pipe of cross-section . The pipe narrows to . Find the speed of water in the narrow part (in ).Answer and solution
Answer: 8 m/s
Continuity: , so . -
MCQWarm-up
In streamline flow of an ideal fluid in a horizontal pipe, where the speed is greater the pressure is- greater
- the same
- zero
- smaller
Answer and solution
Answer: D
constant along a horizontal streamline: a larger means a smaller . -
MCQWarm-up
The pressure at the bottom of a liquid in vessels of different shapes, all filled to the same height with the same liquid, is- larger in the widest vessel
- larger in the narrowest vessel
- the same in all of them
- larger in the vessel with the greatest volume
Answer and solution
Answer: C
depends only on the depth and the density, not on the shape or the amount (the hydrostatic paradox). -
NATWarm-up
Find the gauge pressure at the bottom of a lake 10 m deep (in kPa; , ).Answer and solution
Answer: 98 kPa (±0.5)
Pa kPa. -
MCQWarm-up
When a clean glass capillary tube is dipped in mercury, the mercury level inside the tube- rises above the outside level
- is depressed below the outside level
- stays level with the outside
- rises, as with water
Answer and solution
Answer: B
Mercury does not wet glass (angle of contact about , obtuse). The meniscus is convex and the level inside falls. Water wets glass (angle about ) and rises. -
MCQWarm-up
Small liquid drops are spherical in shape because of- surface tension
- viscosity
- gravity
- buoyancy
Answer and solution
Answer: A
Surface tension tries to reduce the surface area. For a fixed volume, the sphere has the least surface area. -
MCQWarm-up
A small ball falling through a viscous liquid reaches a constant (terminal) speed when- the viscous force becomes zero
- the weight becomes zero
- the buoyant force exceeds the weight
- the net force on it becomes zero
Answer and solution
Answer: D
As the speed grows, the viscous drag grows, until weight buoyancy drag. The net force is zero, so the acceleration is zero. -
MCQWarm-up
The equation of continuity expresses the conservation of- energy
- momentum
- mass
- angular momentum
Answer and solution
Answer: C
For an incompressible fluid, the volume flowing in per second equals that flowing out: . This is mass conservation. Bernoulli's equation expresses energy conservation. -
MCQWarm-up
The instrument used to measure atmospheric pressure is the- manometer for gases only
- hydrometer
- viscometer
- barometer
Answer and solution
Answer: D
A barometer (for example, the mercury barometer of Torricelli) measures atmospheric pressure. A manometer measures the pressure of a confined gas relative to the atmosphere, a hydrometer measures density, and a viscometer measures viscosity. -
MCQWarm-up
The dimensional formula of surface tension isAnswer and solution
Answer: C
Surface tension is force per length: . Equivalently, energy per area: . -
NATWarm-up
An object of volume 2 L is completely immersed in water. Find the buoyant force on it (in N). .Answer and solution
Answer: 19.6 N (±0.05)
N. -
MCQWarm-up
As a submarine goes deeper in the sea, the pressure on its hull- decreases
- increases in proportion to the depth
- stays the same
- increases in proportion to the square of the depth
Answer and solution
Answer: B
is linear in the depth . -
MCQWarm-up
The viscous force between two layers of a flowing fluid- opposes the relative motion of the layers
- helps the relative motion of the layers
- acts perpendicular to the layers
- is zero for all real fluids
Answer and solution
Answer: A
A faster layer drags the slower one forward, and the slower layer drags the faster one back: the force is tangential and opposes the relative motion. -
MCQWarm-up
The flow of a liquid is said to be streamline (laminar) when- the particles move in random directions
- the speed is very high
- the liquid is very viscous only
- every particle passing a given point follows the same path with the same velocity
Answer and solution
Answer: D
In steady streamline flow, the velocity at any fixed point does not change in time, and the particles follow smooth, non-crossing paths. -
MCQWarm-up
A small insect can walk on water because of- buoyancy only
- viscosity of water
- surface tension
- low density of water
Answer and solution
Answer: C
The water surface behaves like a stretched elastic film. The vertical component of the surface tension force supports the insect's weight. -
NATStandard
In a hydraulic lift the small piston has an area of and the large piston . What force (in kN) on the small piston lifts a load of 15 kN on the large one?Answer and solution
Answer: 0.15 kN (±0.005)
. kN. (The load 15 kN is .)Why people get this wrong: Convert to before the ratio.
-
MCQStandard
The absolute pressure at a depth of 20 m in a lake (atmospheric pressure Pa, ) is- 1.96 Pa
- 2.97 Pa
- 2.03 Pa
- 1.11 Pa
Answer and solution
Answer: B
Pa.Why people get this wrong: Add the atmosphere for the absolute pressure.
-
MCQStandard
If water were used instead of mercury (density ) in a barometer at 760 mm Hg, the water column would be about- 10.3 m
- 0.76 m
- 13.6 m
- 760 m
Answer and solution
Answer: A
Same pressure: . m. -
NATStandard
An open U-tube manometer holds water. The liquid is 20 cm higher in the open arm than in the arm connected to a gas. Find the gauge pressure of the gas (in Pa). .Answer and solution
Answer: 1960 Pa
The gas pushes its own arm down, so its level is lower and the open arm's level is higher. Compare two points at the same level (the gas-side surface): pressure there is on one side and on the other. So Pa.