Home / Courses / IIT JAM Physics / Practice / Work, energy, momentum and collisions

Work, energy, momentum and collisions

Mechanics and properties of matter · 90 questions and templates for IIT JAM Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Work, energy, momentum and collisions.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. NATWarm-up

    A constant force F→=3iˆ+4jˆ N acts on a particle while it moves through Δr→=2iˆ−jˆ+5kˆ m. The work done (in J) is ______.
    Answer and solution

    Answer: 2 J

    W=F→⋅Δr→=3(2)+4(−1)+0(5)=6−4=2 J.

    Why people get this wrong: The force has no z-part, so the 5 m along z does no work.

  2. MCQWarm-up

    A 2 kg body has momentum 4 kg m/s. Its kinetic energy is
    1. 2 J
    2. 16 J
    3. 4 J
    4. 8 J
    Answer and solution

    Answer: C

    K=p22m=164=4 J. (Check: v=p/m=2 m/s and 12×2×22=4 J.)
  3. MCQWarm-up

    Which of these forces is NOT conservative?
    1. Kinetic friction
    2. The gravitational force of the Earth
    3. The force of an ideal spring
    4. The electrostatic force between two fixed charges
    Answer and solution

    Answer: A

    A force is conservative if the work it does around any closed path is zero. Kinetic friction always opposes the sliding, so it does negative work on every leg of a round trip and the total is not zero. The other three can each be written as minus the gradient of a potential energy.
  4. NATWarm-up

    A 2 kg ball moving at 6 m/s hits a 4 kg ball at rest and they stick together. The kinetic energy lost (in J) is ______.
    Answer and solution

    Answer: 24 J

    Momentum: 2×6=6v, so v=2 m/s. Kinetic energy before: 12×2×36=36 J; after: 12×6×4=12 J. Lost: 24 J (it becomes heat, sound and deformation).

    Why people get this wrong: Kinetic energy is not conserved when bodies stick together; momentum is.

  5. MCQWarm-up

    A ball hits an identical ball at rest head-on in a perfectly elastic collision. After the collision
    1. both move together at half the speed
    2. the first ball bounces back with the same speed
    3. both move forward, each at 1/2 of the original speed
    4. the first ball stops and the second moves off with the first ball's velocity
    Answer and solution

    Answer: D

    For a head-on elastic collision with the target at rest, v1=m1−m2m1+m2u and v2=2m1m1+m2u. With equal masses: v1=0, v2=u. The balls swap velocities, as in Newton's cradle.
  6. MCQWarm-up

    A force of 50 N keeps a body moving at a steady 4 m/s in the direction of the force. The power delivered by the force is
    1. 0 W, since the speed does not change
    2. 200 W
    3. 12.5 W
    4. 54 W
    Answer and solution

    Answer: B

    P=F→⋅v→=50×4=200 W. The speed is steady because some other force (friction or drag) takes the energy away at the same rate.

    Why people get this wrong: Zero net work does not mean this one force does no work.

  7. MCQWarm-up

    A stone moves in a circle at constant speed, held by a string. During one full revolution the work done by the tension is
    1. zero
    2. 2πrT
    3. πrT
    4. mv2
    Answer and solution

    Answer: A

    The tension points to the centre and the velocity is along the tangent, so T→⋅v→=0 at every instant. No work is done, and indeed the kinetic energy stays the same.
  8. MCQWarm-up

    A ball is thrown straight up and caught again at the height it left the hand (no air resistance). The total work done on it by gravity during the flight is
    1. zero
    2. positive, equal to mghmax⁡
    3. negative, equal to −mghmax⁡
    4. 2mghmax⁡
    Answer and solution

    Answer: A

    On the way up gravity does −mghmax⁡ (force opposite to motion); on the way down +mghmax⁡. They cancel. Equivalently, gravity is conservative and the ball ends at the same height, so the work is −ΔU=0, and the ball returns with the speed it started with.

    Why people get this wrong: Work is not the force times the total distance travelled; the sign changes with direction.

  9. MCQStandard

    A force F=3x2 N (with x in m) acts along the x-axis. The work it does as a particle moves from x=0 to x=2 m is
    1. 24 J
    2. 6 J
    3. 8 J
    4. 12 J
    Answer and solution

    Answer: C

    For a variable force, W=∫Fdx=∫023x2dx=[x3]02=8 J.

    Why people get this wrong: 12 J is F(2)×2, which treats the force as constant at its final value.

  10. MCQStandard

    A spring of stiffness 200 N/m is compressed by 0.1 m and launches a 0.5 kg block along a smooth floor. The block leaves the spring at
    1. 2 m/s
    2. 4 m/s
    3. 1.4 m/s
    4. 20 m/s
    Answer and solution

    Answer: A

    Spring energy becomes kinetic energy: 12kx2=12mv2, so v=xk/m=0.1×400=2 m/s.

    Why people get this wrong: Forgetting the square root, or using kx (a force) as an energy.

  11. MCQStandard

    A particle moves along x in the potential U(x)=x3−3x (SI units). Its points of equilibrium are
    1. x=1 (unstable) and x=−1 (stable)
    2. x=0 (stable) only
    3. x=±3, both stable
    4. x=1 (stable) and x=−1 (unstable)
    Answer and solution

    Answer: D

    Equilibrium where the force −dU/dx=0: 3x2−3=0, so x=±1. Stability from the curvature: U′′=6x, positive (a valley, stable) at x=1 and negative (a hilltop, unstable) at x=−1.

    Why people get this wrong: x=±3 and x=0 are where U=0, not where the force is zero.

  12. NATStandard

    Point masses of 1 kg, 2 kg and 3 kg sit at (0,0), (3,0) and (0,4) m. The distance of their centre of mass from the origin (in m, two decimal places) is ______.
    Answer and solution

    Answer: 2.24 m (±0.01)

    xcm=1(0)+2(3)+3(0)6=1 m and ycm=1(0)+2(0)+3(4)6=2 m. Distance =1+4=5≈2.24 m.
  13. MCQStandard

    A ball is dropped from height h onto a hard floor; the coefficient of restitution is e. The greatest height it reaches after the n-th bounce is
    1. h/e2n
    2. e2nh
    3. enh
    4. en/2h
    Answer and solution

    Answer: B

    Each bounce multiplies the speed by e. Height goes as speed squared, so each bounce multiplies the height by e2. After n bounces: e2nh.

    Why people get this wrong: e relates speeds, not heights.

  14. MCQStandard

    A 10 g bullet moving at 400 m/s embeds itself in a 2 kg block resting on a smooth floor. The block then moves at about
    1. 0.995 m/s
    2. 3.98 m/s
    3. 1.99 m/s
    4. 2.00 m/s
    Answer and solution

    Answer: C

    Momentum: 0.01×400=(2+0.01)v, so v=4/2.01≈1.99 m/s.

    Why people get this wrong: 2.00 m/s forgets that the bullet moves with the block afterwards.

  15. MSQStandard

    Two bodies in an isolated system collide and stick together. Which quantities have the same value before and after the collision?
    1. Total linear momentum
    2. Total kinetic energy
    3. Total energy (including heat and internal energy)
    4. Total angular momentum about any fixed point
    Answer and solution

    Answer: A, C, D

    No external force: momentum is conserved. No external torque: angular momentum is conserved. Energy as a whole is always conserved. Only kinetic energy is not: some turns into heat and deformation.
  16. MCQStandard

    A 4 kg gun fires a 20 g bullet at 300 m/s. The recoil speed of the gun is
    1. 6 m/s
    2. 0.15 m/s
    3. 15 m/s
    4. 1.5 m/s
    Answer and solution

    Answer: D

    Total momentum is zero before firing, so it is zero after: 4V=0.02×300=6, giving V=1.5 m/s.

    Why people get this wrong: Forgetting to convert 20 g to 0.02 kg gives 1500 m/s or 15 m/s.

  17. MCQStandard

    A ball makes a glancing (not head-on) elastic collision with an identical ball at rest. After the collision, the angle between their velocities is
    1. 180∘
    2. any value, depending on the impact
    3. 90∘
    4. 45∘
    Answer and solution

    Answer: C

    Momentum: u→=v→1+v→2. Energy (equal masses): u2=v12+v22. Squaring the first gives u2=v12+v22+2v→1⋅v→2, so v→1⋅v→2=0: they move off at right angles (unless the hit is head-on, when one ball stops).
  18. MCQStandard

    The force F→=2xyiˆ+x2jˆ N acts on a particle moving in the xy-plane. The work done from (0,0) to (1,2) m along any path is
    1. 2 J
    2. 4 J
    3. 1 J
    4. It depends on the path
    Answer and solution

    Answer: A

    ∂Fy/∂x=2x=∂Fx/∂y, so the force is conservative with F→=∇(x2y). Work =x2y|(1,2)−x2y|(0,0)=2 J. (Here F→=+∇ϕ, so the potential energy is U=−x2y.)
  19. MCQStandard

    A 1000 kg car's engine delivers a constant 20 kW. Ignoring resistance, its acceleration when moving at 10 m/s on a level road is
    1. 0.2 m/s²
    2. 200 m/s²
    3. 2 m/s²
    4. 20 m/s²
    Answer and solution

    Answer: C

    P=Fv, so the driving force is F=P/v=20000/10=2000 N and a=F/m=2 m/s². At constant power the acceleration falls as the car speeds up.
  20. MCQStandard

    A 1 kg ball moving at speed u hits a 4 kg ball at rest and they stick. The fraction of the initial kinetic energy lost is
    1. 50%
    2. 64%
    3. 80%
    4. 20%
    Answer and solution

    Answer: C

    Common velocity v=u/5. Kinetic energy after: 12(5)(u/5)2=110u2; before: 12u2. Fraction kept 1/5, lost 4/5=80%. In general the loss is m2m1+m2 when m2 starts at rest.
  21. MSQStandard

    Two particles interact only with each other through a conservative force (no external forces). Which are always true?
    1. Their total momentum is constant.
    2. Their total mechanical energy (kinetic + potential) is constant.
    3. Their centre of mass moves with constant velocity.
    4. The kinetic energy of each particle is constant.
    Answer and solution

    Answer: A, B, C

    Internal forces come in third-law pairs, so the total momentum is constant, and so is the CM velocity P→/M. A conservative internal force keeps kinetic + potential energy constant. Kinetic energy moves between the particles and into potential energy, so D is false.
  22. MSQStandard

    Which statements about the work-energy theorem are correct?
    1. The work done by the net force equals the change in kinetic energy.
    2. It holds even when non-conservative forces act.
    3. The work done by static friction on a body is always zero.
    4. The work done by a given force can be different in two different inertial frames.
    Answer and solution

    Answer: A, B, D

    A is the theorem; it comes straight from F=ma and holds for every kind of force (B). C is false: static friction on a crate in a truck that speeds up does positive work on the crate (the contact point moves with the crate). D: work is force times displacement, and displacements differ between frames, so work (like kinetic energy) is frame dependent; the theorem holds in each frame.

    Why people get this wrong: Static friction does no work in pure rolling on a fixed surface, but that is a special case.

  23. NATStandard

    A block slides at 6 m/s onto a rough horizontal floor with μk=0.3. The distance it slides before stopping is ______ m (g=9.8 m/s², two decimal places).
    Answer and solution

    Answer: 6.12 m (±0.02)

    Friction μkmg does work −μkmgd, which must remove the kinetic energy 12mv2: d=v22μkg=365.88=6.12 m. The mass cancels.

    Why people get this wrong: The answer does not depend on the mass; heavier blocks feel more friction in proportion.

  24. MCQStandard

    A 1 kg body and a 4 kg body have the same kinetic energy. The ratio of their momenta, p1:p2, is
    1. 1 : 4
    2. 1 : 2
    3. 2 : 1
    4. 1 : 1
    Answer and solution

    Answer: B

    K=p22m, so p=2mK. With equal K, p∝m: p1:p2=1:4=1:2. (The light body is twice as fast, v1:v2=2:1, but the heavy one carries more momentum.)

    Why people get this wrong: 2:1 is the ratio of speeds, not momenta.

  25. NATExam level

    A ball is dropped from 5 m onto a floor with coefficient of restitution 0.6. The total distance it travels before coming to rest (in m) is ______.
    Answer and solution

    Answer: 10.625 m (±0.02)

    It falls 5 m, then goes up and down e2h, e4h, ... Total =h+2h(e2+e4+…)=h+2he21−e2=h1+e21−e2=5×1.360.64=10.625 m.

    Why people get this wrong: Every rebound height is travelled twice (up and down), except the first drop.

  26. NATExam level

    A 2 kg ball moving at 5 m/s makes a head-on elastic collision with a 3 kg ball at rest. The speed of the 3 kg ball afterwards (in m/s) is ______.
    Answer and solution

    Answer: 4 m/s

    v2=2m1m1+m2u=45×5=4 m/s, and v1=m1−m2m1+m2u=−1 m/s (the lighter ball bounces back). Check with momentum 2(−1)+3(4)=10 and energy 1+24=25 J. Both match.
  27. MCQExam level

    A body of mass m1 hits a body of mass m2 at rest head-on, elastically. The fraction of m1's kinetic energy given to m2 is
    1. 2m1m1+m2
    2. 4m1m2(m1+m2)2
    3. m2m1+m2
    4. (m1−m2m1+m2)2
    Answer and solution

    Answer: B

    v2=2m1um1+m2, so 12m2v2212m1u2=4m1m2(m1+m2)2. It equals 1 only for equal masses. Option D is the fraction that m1 keeps; the two add up to 1.

    Why people get this wrong: Option A is the velocity ratio, not the energy fraction.

  28. NATExam level

    In a reactor, a neutron (mass 1 u) hits a carbon-12 nucleus (mass 12 u) at rest, head-on and elastically. The fraction of its kinetic energy that the neutron keeps is ______ (three decimal places).
    Answer and solution

    Answer: 0.716 (±0.005)

    The neutron's velocity after is m−Mm+Mu=−1113u. The energy fraction kept is (11/13)2=121/169≈0.716. A light moderator (hydrogen in water) works better because equal masses can stop the neutron in one hit.
  29. NATExam level

    A 1 kg puck moving at 4 m/s along x hits an identical puck at rest in an elastic collision and moves off at 30∘ to the x-axis. The speed of the second puck (in m/s) is ______.
    Answer and solution

    Answer: 2 m/s (±0.01)

    Equal masses, elastic: the pucks leave at right angles, so the second moves at 60∘ to the x-axis on the other side. The momentum triangle is right-angled with hypotenuse u=4: v1=ucos⁡30∘≈3.46 m/s and v2=usin⁡30∘=2 m/s. Check: 3.462+22=16.
  30. MCQExam level

    A particle moves in the potential U(r)=−ar+br2 with a,b>0. The equilibrium distance and its nature are
    1. r0=2b/a, unstable
    2. r0=b/a, stable
    3. r0=a/(2b), stable
    4. r0=2b/a, stable
    Answer and solution

    Answer: D

    U′(r)=ar2−2br3=0 gives r0=2b/a. U′′(r)=−2ar3+6br4; at r0 this is −2ar0+6br04=−4b+6br04>0, a minimum, so stable.

    Why people get this wrong: r=b/a is where U=0.

← All topics · Timed mock test →