Home / Courses / GATE Physics / Practice / The free electron model

The free electron model

Solid state physics and devices · 84 questions and templates for GATE Physics, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: The free electron model.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    For free electrons in three dimensions, the density of states per unit volume g(E) varies with energy as
    1. E−1/2
    2. E1/2
    3. a constant
    4. E3/2
    Answer and solution

    Answer: B

    The number of states with energy below E is the volume of a sphere of radius k=2mE/ℏ in k-space: N(E)∝k3∝E3/2. Then g(E)=dN/dE∝E1/2. Explicitly g(E)=12π2(2mℏ2)3/2E1/2 including spin.

    Why people get this wrong: E3/2 is the number of states below E, not the density of states.

  2. MCQWarm-up

    In the Drude model a metal has conductivity σ0. If the electron density is halved and the relaxation time doubled, the conductivity becomes
    1. σ0/2
    2. 2σ0
    3. σ0
    4. 4σ0
    Answer and solution

    Answer: C

    σ=ne2τ/m is proportional to the product nτ. Halving n and doubling τ leaves nτ and so σ unchanged.
  3. MSQWarm-up

    For the Fermi-Dirac function f(E)=1/(e(E−μ)/kBT+1), which statements are correct?
    1. f can exceed 1 for states well below μ at high temperature.
    2. f(μ)=12 at every temperature above zero.
    3. At T=0, f is a step: 1 below μ and 0 above.
    4. f(μ+Δ)=1−f(μ−Δ) for any Δ.
    Answer and solution

    Answer: B, C, D

    At E=μ the exponential is 1, so f=12. As T→0 the exponent goes to ∓∞ below and above μ, giving the step. Symmetry: 1−f(μ−Δ)=e−Δ/kBTe−Δ/kBT+1=11+eΔ/kBT=f(μ+Δ): the chance a state Δ above is filled equals the chance a state Δ below is empty. f≤1 always (Pauli principle).
  4. NATWarm-up

    The free-electron density of a metal is made 8 times larger. Its Fermi energy increases by a factor of ______.
    Answer and solution

    Answer: 4

    EF=ℏ22m(3π2n)2/3∝n2/3. So the factor is 82/3=4.

    Why people get this wrong: Using kF∝n1/3 (factor 2) instead of EF∝kF2.

  5. MCQWarm-up

    For a two-dimensional free electron gas (area A, parabolic band, spin included), the density of states per unit area
    1. is independent of energy and equals m/πℏ2
    2. grows as E1/2
    3. falls as E−1/2
    4. grows linearly with E
    Answer and solution

    Answer: A

    In 2D the states below E fill a disc: N(E)=2⋅πk2(2π)2A=k2A2π=mEAπℏ2. So g=dN/dE per area =m/πℏ2, a constant. This is why a 2D electron gas has EF∝n.
  6. MCQWarm-up

    The Fermi temperature TF=EF/kB of a typical metal such as copper is of the order of
    1. 102 K
    2. 103 K
    3. 106 K
    4. 104 to 105 K
    Answer and solution

    Answer: D

    Metallic Fermi energies are 2 to 12 eV. With kB=8.62×10−5 eV/K, EF=7 eV gives TF≈8×104 K. Room temperature is therefore a very low temperature for the electron gas, T/TF∼0.004.
  7. MCQWarm-up

    Two pieces of the same pure metal at the same temperature have volumes V and 2V. In the free electron model, their Fermi energies are related by
    1. EF of the larger piece is 22/3 times higher
    2. EF of the larger piece is half as large
    3. the two Fermi energies are equal
    4. EF of the larger piece is 21/3 times lower
    Answer and solution

    Answer: C

    EF=ℏ22m(3π2n)2/3 depends only on the electron density n=N/V. Doubling the piece doubles both N and V, so n and EF are unchanged: the Fermi energy is an intensive property of the material.

    Why people get this wrong: Using the number of electrons instead of their density.

  8. NATStandard

    A monovalent metal has 2.65×1028 conduction electrons per m3. Its free-electron Fermi energy is ______ eV (to two decimal places). Take ℏ2/2me=0.0381 eV nm2.
    Answer and solution

    Answer: 3.24 (±0.03)

    n=26.5 nm−3. kF2=(3π2n)2/3=(784.6)2/3=85.06 nm−2. EF=0.0381×85.06=3.24 eV (sodium-like).
  9. MCQStandard

    At T=0, the mean kinetic energy per electron of a three-dimensional free electron gas with Fermi energy EF is
    1. 12EF
    2. 23EF
    3. 35EF
    4. 32kBTF
    Answer and solution

    Answer: C

    ⟨E⟩=∫0EFEg(E)dE∫0EFg(E)dE with g∝E1/2: 25EF5/223EF3/2=35EF. In 2D it is 12EF and in 1D 13EF.

    Why people get this wrong: 12EF is the 2D result, where g is constant.

  10. MCQStandard

    The Fermi velocity of free electrons in a metal with EF=5.0 eV is closest to
    1. 1.3×105 m/s
    2. 1.3×106 m/s
    3. 4.2×105 m/s
    4. 1.9×106 m/s
    Answer and solution

    Answer: B

    vF=2EF/m=2×5.0×1.602×10−19/9.11×10−31=1.76×1012=1.33×106 m/s, about c/230, so non-relativistic. It does not depend on temperature: even at T=0 the fastest electrons move this fast.
  11. NATStandard

    A metal has resistivity 1.7×10−8 Ω m and 8.5×1028 free electrons per m3. The Drude relaxation time is ______ fs (to one decimal place).
    Answer and solution

    Answer: 24.6 (±0.3)

    τ=mρne2=9.11×10−311.7×10−8×8.5×1028×(1.602×10−19)2=9.11×10−313.71×10−17=2.46×10−14 s =24.6 fs.
  12. MCQStandard

    In the Sommerfeld free electron model the Lorenz number L=κ/σT is
    1. 32(kBe)2
    2. (kBe)2
    3. π22(kBe)2
    4. π23(kBe)2
    Answer and solution

    Answer: D

    Kinetic theory gives κ=13cvv2τ. With the Sommerfeld cv=π22nkB(T/TF) and v=vF, κ=π2nkB2Tτ3m. Dividing by σ=ne2τ/m: L=π23(kB/e)2=2.44×10−8 W Ω K−2.

    Why people get this wrong: 32(kB/e)2 is the classical Drude value, which uses cv=32nkB and 12mv2=32kBT.

  13. MSQStandard

    Which statements about the Sommerfeld (quantum) free electron model are correct?
    1. The Drude formula σ=ne2τ/m still holds, with τ the relaxation time of electrons at the Fermi surface.
    2. It explains why aluminium has a positive Hall coefficient in strong fields.
    3. The electronic heat capacity is proportional to T at low temperature.
    4. Only electrons within a few kBT of EF can take up thermal energy.
    Answer and solution

    Answer: A, C, D

    Pauli blocking means only a fraction ∼T/TF of electrons can be excited, each by ∼kBT, so C∝T. Conduction shifts the whole Fermi sphere by mδv=−eEτ, giving the same σ=ne2τ/m. A positive Hall coefficient needs hole-like orbits, which come from the lattice (band theory); free electrons always give RH=−1/ne.
  14. MCQStandard

    Electrons of mass me in a metal have relaxation time 2.0×10−14 s. Their mobility is about
    1. 3.5 cm2/V s
    2. 350 cm2/V s
    3. 35 cm2/V s
    4. 0.35 cm2/V s
    Answer and solution

    Answer: C

    μ=eτ/m=1.602×10−19×2.0×10−14/9.11×10−31=3.5×10−3 m2/V s =35 cm2/V s. Metals have low mobilities but huge n; silicon electrons have μ≈1400 cm2/V s.

    Why people get this wrong: Forgetting that 1 m2 = 104 cm2.

  15. MCQStandard

    For a 3D free electron gas of density n at T=0, the density of states per unit volume at the Fermi energy is
    1. nEF
    2. 3n2EF
    3. 2n3EF
    4. 3n5EF
    Answer and solution

    Answer: B

    n=∫0EFgdE with g=AE1/2 gives n=23AEF3/2. So g(EF)=AEF1/2=32n/EF. Equivalently dln⁡n/dln⁡EF=32.
  16. MCQStandard

    Electrons free to move along a thin wire (one dimension, parabolic band) have a density of states that
    1. is constant
    2. grows as E1/2
    3. falls as E−1/2
    4. grows as E
    Answer and solution

    Answer: C

    In 1D, N(E)∝k∝E1/2, so g=dN/dE∝E−1/2. It diverges at the band bottom (a van Hove singularity), seen in the optical spectra of nanotubes. General rule: g∝Ed/2−1 in d dimensions.
  17. MCQStandard

    Copper has 8.47×1028 free electrons per m3. The radius of its free-electron Fermi sphere is about
    1. 1.36 Å−1
    2. 0.68 Å−1
    3. 2.72 Å−1
    4. 13.6 Å−1
    Answer and solution

    Answer: A

    kF=(3π2n)1/3=(3π2×8.47×1028)1/3=(2.51×1030)1/3=1.36×1010 m−1=1.36 Å−1. The Fermi wavelength 2π/kF=4.6 Å is about one lattice spacing.

    Why people get this wrong: 13.6 is kF in nm−1, not Å−1.

  18. MSQStandard

    For a free electron gas in a box of volume V with periodic boundary conditions, which statements are correct?
    1. Doubling the electron density doubles the radius of the Fermi sphere.
    2. At T=0 every state inside the Fermi sphere holds two electrons and every state outside is empty.
    3. The Fermi velocity does not depend on the electron density.
    4. Each allowed 𝐤 occupies a volume (2π)3/V of k-space.
    Answer and solution

    Answer: B, D

    Periodic conditions give ki=2πni/L, so one 𝐤 per (2π/L)3. Filling with 2 electrons per 𝐤: n=kF3/3π2, so kF∝n1/3 (doubling n multiplies kF by 1.26) and vF=ℏkF/m grows with n.
  19. MCQStandard

    In the free electron model of a metal, the conduction electrons sit in a potential well. If the Fermi energy (measured from the bottom of the well) is 7.0 eV and the work function is 4.5 eV, the bottom of the well lies below the vacuum level by
    1. 11.5 eV
    2. 4.5 eV
    3. 7.0 eV
    4. 2.5 eV
    Answer and solution

    Answer: A

    The most energetic electrons, at EF, need the work function W to escape, so the vacuum level is W above EF. The well bottom lies a further EF below the Fermi level: depth =EF+W=7.0+4.5=11.5 eV.

    Why people get this wrong: The work function is measured from the Fermi level, not from the bottom of the band.

  20. NATStandard

    A copper wire (8.5×1028 free electrons per m3) carries a current density of 1.0×106 A/m2. The electrons' drift speed is ______ mm/s (to three decimal places).
    Answer and solution

    Answer: 0.073 (±0.001)

    vd=J/(ne)=106/(8.5×1028×1.602×10−19)=7.34×10−5 m/s =0.073 mm/s. That is about 10−10 of the Fermi velocity; signals travel fast because the field, not the electrons, moves along the wire.

    Why people get this wrong: Mixing m/s with mm/s; the drift is far slower than walking pace.

  21. MCQStandard

    Sodium has 2.65×1028 and aluminium 18.1×1028 conduction electrons per m3. The ratio of aluminium's free-electron Fermi energy to sodium's is about
    1. 6.83
    2. 3.60
    3. 2.61
    4. 46.7
    Answer and solution

    Answer: B

    EF∝n2/3, so the ratio is (18.1/2.65)2/3=6.832/3=3.60. (Measured values: about 11.7 eV against 3.24 eV.)

    Why people get this wrong: EF grows as n2/3, not as n (6.83) or n1/2 (2.61).

  22. NATExam level

    A free electron gas has TF=8.0×104 K. At 300 K its heat capacity is a fraction ______ of the classical value 32nkB (to four decimal places).
    Answer and solution

    Answer: 0.0123 (±0.0003)

    Sommerfeld: C=π22nkBTTF. Ratio to 32nkB: π23TTF=3.290×30080000=0.0123. This is why electrons add almost nothing to a metal's heat capacity at room temperature.
  23. MCQExam level

    As a 3D free electron gas is warmed from T=0 (still T≪TF), its chemical potential
    1. rises as EF[1+(T/TF)2]
    2. stays exactly at EF
    3. falls slightly, as EF[1−π212(T/TF)2]
    4. falls linearly in T
    Answer and solution

    Answer: C

    With g∝E1/2 there are more states just above EF than just below. Keeping n fixed while the occupation smears symmetrically about μ would overfill, so μ must drop. The Sommerfeld expansion gives μ=EF[1−π212(T/TF)2]; the shift is even in T because f is symmetric about μ.

    Why people get this wrong: In 2D, where g is constant, the shift is not ∝T2 but exponentially small.

  24. NATExam level

    A GaAs two-dimensional electron gas has sheet density 1.0×1016 m−2 and effective mass 0.067me (spin degeneracy 2). Its Fermi energy measured from the subband bottom is ______ meV (to one decimal place).
    Answer and solution

    Answer: 35.7 (±0.4)

    In 2D, n=gEF with g=m∗/πℏ2, so EF=πℏ2n/m∗. π×(1.055×10−34)2×1016/(0.067×9.11×10−31)=5.72×10−21 J =35.7 meV.

    Why people get this wrong: Leaving out spin gives 2πℏ2n/m∗, twice too large.

  25. MSQExam level

    For a 3D free electron gas at T=0 with density n and Fermi energy EF, which statements are correct?
    1. The pressure is P=25nEF.
    2. The bulk modulus is B=23nEF.
    3. The pressure is proportional to n2/3.
    4. The pressure is not zero even though T=0.
    Answer and solution

    Answer: A, B, D

    Total energy U=35NEF∝N5/3V−2/3. P=−∂U/∂V=23U/V=25nEF∝n5/3. B=−V∂P/∂V=53P=23nEF. The pressure comes from the Pauli principle, not from thermal motion.

    Why people get this wrong: n2/3 is how EF scales; P=25nEF carries an extra n.

  26. NATExam level

    At low temperature a metal has C=γT+AT3 with γ=0.70 mJ mol−1 K−2 and A=0.050 mJ mol−1 K−4. The electronic and lattice contributions are equal at T= ______ K (to two decimal places).
    Answer and solution

    Answer: 3.74 (±0.03)

    γT=AT3 gives T=γ/A=14=3.74 K. Below this the electrons dominate the heat capacity of a metal, even though they are negligible at room temperature.
  27. MCQExam level

    Low-temperature heat capacity data of a metal are plotted as C/T against T2. The plot is a straight line whose
    1. slope gives the electronic coefficient γ and intercept the Debye term
    2. intercept gives γ and slope the Debye coefficient A∝θD−3
    3. intercept is zero for every metal
    4. slope gives the Fermi energy directly
    Answer and solution

    Answer: B

    C/T=γ+AT2: a line in T2 with intercept γ (electrons, ∝g(EF)) and slope A=12π45R/θD3 (phonons). From γ one gets the thermal effective mass m∗/m=γexp/γfree.
  28. NATExam level

    A monovalent metal has free-electron Fermi temperature 5.0×104 K. Its electronic heat capacity coefficient γ is ______ mJ mol−1 K−2 (to three decimal places).
    Answer and solution

    Answer: 0.821 (±0.008)

    Per mole of electrons C=π22RTTF, so γ=π2R2TF=9.870×8.3141.0×105=8.21×10−4 J mol−1 K−2=0.821 mJ mol−1 K−2.
  29. MCQExam level

    Alkali metals reflect visible light but become transparent in the ultraviolet. In the free electron picture this is because
    1. ultraviolet photons ionise the ions
    2. the relaxation time becomes zero at high frequency
    3. the permittivity ε=1−ωp2/ω2 is negative below ωp and positive above it
    4. the band gap of the metal lies in the ultraviolet
    Answer and solution

    Answer: C

    For ωτ≫1 the free electrons give ε(ω)=1−ωp2/ω2 with ωp2=ne2/ε0m. Below ωp, ε<0, the wave vector is imaginary, the wave is evanescent and is reflected. Above ωp the metal transmits. For alkali densities ωp is in the UV (about 200 to 300 nm).
  30. NATExam level

    For a metal with 2.65×1028 free electrons per m3, the free-electron model predicts transparency for wavelengths shorter than ______ nm (to the nearest nm).
    Answer and solution

    Answer: 205 (±3)

    ωp=ne2/ε0m=2.65×1028×2.567×10−388.854×10−12×9.11×10−31=9.18×1015 rad/s. λp=2πc/ωp=205 nm. (Sodium is measured to turn transparent near 210 nm.)

← All topics · Timed mock test →