Heat, expansion, calorimetry and heat transfer
Class 11 · 241 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.
New to this topic? Read the lesson first: Heat, expansion, calorimetry and heat transfer.
Loading questions… (they need JavaScript; nothing you type is sent anywhere)
Written questions with solutions
The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.
-
NATWarm-up
Convert to the Fahrenheit scale (in ).Answer and solution
Answer: 122 °F
. -
MCQWarm-up
Absolute zero on the Celsius scale is aboutAnswer and solution
Answer: B
. Zero kelvin is therefore . The other options are not special points. -
NATWarm-up
A steel rod 2 m long has . By how many mm does it lengthen when heated by ?Answer and solution
Answer: 1.2 mm (±0.05)
m mm. -
MCQWarm-up
The SI unit of specific heat capacity isAnswer and solution
Answer: A
, so its unit is J per kg per kelvin. J kg-1 is latent heat, J K-1 is heat capacity and W m-1 K-1 is thermal conductivity. -
MCQWarm-up
Water has its maximum density atAnswer and solution
Answer: D
Between 0 and C water contracts on heating, so its density is largest at about C (3.98 C). -
NATWarm-up
How much heat (in kJ) raises the temperature of 2 kg of water by ? ()Answer and solution
Answer: 84 kJ
J kJ. -
MCQWarm-up
Heat from the Sun reaches the Earth mainly by- conduction
- convection
- radiation
- conduction and convection together
Answer and solution
Answer: C
Space is almost a vacuum, so there is no medium for conduction or convection. Electromagnetic radiation does not need a medium. -
NATWarm-up
At what temperature (in C) do the Celsius and Fahrenheit readings become equal?Answer and solution
Answer: -40 °C
Put in : . -
MCQWarm-up
For an isotropic solid the coefficients of linear, area and volume expansion are in the ratio (approximately)- 1 : 3 : 2
- 1 : 2 : 3
- 1 : 1 : 1
- 3 : 2 : 1
Answer and solution
Answer: B
Area gives and volume gives (for small ). -
NATWarm-up
How much heat (in kJ) is needed to melt 0.5 kg of ice at C? ()Answer and solution
Answer: 168 kJ
kJ. The temperature stays at C while the ice melts. -
MCQWarm-up
An ideal black body- absorbs all the radiation falling on it
- reflects all the radiation falling on it
- emits only visible light
- must look black at every temperature
Answer and solution
Answer: A
Black body means perfect absorber at all wavelengths (and so the best emitter). A very hot black body glows white or red, so it need not look black. -
NATWarm-up
Express on the Kelvin scale (in K).Answer and solution
Answer: 300 K
K. -
MCQWarm-up
According to Stefan's law, the power radiated by a black body is proportional toAnswer and solution
Answer: D
, with in kelvin. -
MCQWarm-up
A pendulum clock is set right in winter. On a hot summer day it will- run fast
- keep correct time
- run slow
- stop
Answer and solution
Answer: C
The rod lengthens, so the time period increases. Each tick takes longer than 1 s, so the clock loses time. -
MCQWarm-up
The silvered walls of a thermos flask mainly reduce heat loss by- conduction through the glass
- radiation
- convection of the liquid
- evaporation
Answer and solution
Answer: B
The vacuum between the double wall stops conduction and convection. The shiny silver coating reflects radiation back. -
MCQWarm-up
While ice at C is melting into water at C, the heat supplied- goes into breaking the ordered structure, with no rise in temperature
- raises the temperature of the ice
- is stored as kinetic energy of the molecules
- is lost to the surroundings
Answer and solution
Answer: A
Latent heat changes the potential energy of the molecules (their arrangement). The temperature, a measure of kinetic energy, stays at C until all the ice has melted. -
NATStandard
A railway rail is 12 m long with . Find the gap (in mm) needed to allow for a rise from C to C.Answer and solution
Answer: 5.28 mm (±0.05)
m mm. -
NATStandard
A metal plate of area () is heated by C. Find the increase in its area (in ).Answer and solution
Answer: 12 cm² (±0.1)
.Why people get this wrong: Use , not , for area.
-
NATStandard
of mercury () is heated by C. Find the increase in volume (in ).Answer and solution
Answer: 4.5 cm³ (±0.05)
. -
NATStandard
200 g of water at C is mixed with 300 g of water at C in an insulated vessel. Find the final temperature (in C).Answer and solution
Answer: 44 °C
Heat lost = heat gained: , so and C. -
NATStandard
100 g of ice at C is dropped into 400 g of water at C. (, .) Find the final temperature (in C).Answer and solution
Answer: 8 °C
Water cooling to C gives cal, more than the 8000 cal needed to melt all the ice, so everything melts and the mixture rises above C. Then gives C. -
NATStandard
A copper rod () has area and length 0.5 m. Its ends are held at C and C. Find the rate of heat flow (in W).Answer and solution
Answer: 16 W
W. -
NATStandard
Two rods of equal length and area are joined end to end. The first has conductivity and the second . The free ends are at C (first rod) and C. Find the temperature of the joint (in C, 1 decimal).Answer and solution
Answer: 66.7 °C (±0.1)
In steady state the same heat flows through both: , so and C. The better conductor has the smaller temperature drop. -
NATStandard
A black body of surface area is at 1000 K. Find the power it radiates (in W). Take .Answer and solution
Answer: 567 W (±0.5)
W. -
NATStandard
The radiation from a star peaks at 500 nm. Find its surface temperature (in K, nearest whole number). Take m K.Answer and solution
Answer: 5796 K (±5)
, so K. -
NATStandard
The absolute temperature of a black body is doubled. By what factor does the radiated power increase?Answer and solution
Answer: 16
, so the factor is . -
MCQStandard
A bimetallic strip of brass (larger ) and iron is heated. It bends so that- the brass is on the inner (concave) side
- it stays straight but gets longer
- the iron is on the convex side
- the brass is on the outer (convex) side
Answer and solution
Answer: D
The metal with larger expands more, so it must lie on the outside of the curve (it has the longer arc). When the strip is cooled it bends the other way. -
NATStandard
How much heat (in cal) is needed to raise the temperature of a 500 g copper block () from C to C?Answer and solution
Answer: 3600 cal
cal. -
NATStandard
How much heat (in kJ, 1 decimal) is released when 10 g of steam at C condenses to water at C? ()Answer and solution
Answer: 22.6 kJ (±0.05)
J kJ. -
MCQStandard
The SI unit of thermal conductivity isAnswer and solution
Answer: C
gives : W m / (m K) W m-1 K-1.