Home / Courses / Engineering entrance / Practice / Gases and liquids

Gases and liquids

Class 11 · 235 questions and templates for Engineering entrance, in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Gases and liquids.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    At constant pressure, the volume of a fixed mass of gas is directly proportional to its absolute temperature. This is
    1. Charles's law
    2. Boyle's law
    3. Gay-Lussac's law
    4. Avogadro's law
    Answer and solution

    Answer: A

    V ∝ T at constant P and n is Charles's law. Boyle's law links P and V at constant T. Gay-Lussac's law links P and T at constant V. Avogadro's law links V and n.

  2. MCQWarm-up

    The value of the gas constant R in L atm K-1 mol-1 is
    1. 8.314
    2. 0.0821
    3. 0.821
    4. 1.987
    Answer and solution

    Answer: B

    R = 0.0821 L atm K-1 mol-1 = 8.314 J K-1 mol-1 = 1.987 cal K-1 mol-1. Only the first is in litre-atmosphere units.

  3. NATWarm-up

    A gas occupies 2 L at 1 atm. It is compressed at constant temperature to 0.5 L. Find the new pressure in atm.
    Answer and solution

    Answer: 4 atm

    Idea: at constant T, P1V1 = P2V2.

    P2 = 1 × 2 / 0.5 = 4 atm.

  4. NATWarm-up

    How many moles of an ideal gas are in 11.2 L at STP (0 °C, 1 atm, molar volume 22.4 L)?
    Answer and solution

    Answer: 0.5 mol (±0.01)

    Idea: one mole occupies 22.4 L at STP.

    n = 11.2 / 22.4 = 0.5 mol.

  5. MCQWarm-up

    In a mixture of non-reacting gases, the total pressure equals
    1. the largest partial pressure
    2. the product of the partial pressures
    3. the sum of the partial pressures of the gases
    4. the average of the partial pressures
    Answer and solution

    Answer: C

    Dalton's law of partial pressures: Ptotal = p1 + p2 + p3 + ... Each gas acts as if it alone filled the vessel.

  6. NATWarm-up

    Convert 27 °C to kelvin.
    Answer and solution

    Answer: 300 K

    T(K) = t(°C) + 273 = 27 + 273 = 300 K.

  7. MCQWarm-up

    Which of these gases diffuses fastest under the same conditions?
    1. He
    2. CH4
    3. O2
    4. H2
    Answer and solution

    Answer: D

    Rate ∝ 1/√M. H2 has the smallest molar mass (2 g/mol; He is 4), so it diffuses fastest.

    Why people get this wrong: Helium is a lighter atom but a heavier gas than H2, because H2 is a molecule of two atoms.

  8. MCQWarm-up

    Which is NOT a postulate of the kinetic theory of an ideal gas?
    1. Gas molecules attract each other strongly
    2. The volume of molecules is negligible compared with the container
    3. Collisions are perfectly elastic
    4. Molecules are in constant random motion
    Answer and solution

    Answer: A

    An ideal gas has no intermolecular attractions or repulsions except during collisions. The other three statements are postulates.

  9. MCQWarm-up

    The compressibility factor Z of an ideal gas is
    1. 0 at all pressures
    2. 1 at all temperatures and pressures
    3. less than 1 at high pressure
    4. greater than 1 at low pressure
    Answer and solution

    Answer: B

    Z = PV/nRT. For an ideal gas PV = nRT exactly, so Z = 1 always.

  10. MCQWarm-up

    The SI unit of surface tension is
    1. N m
    2. N m-2
    3. N m-1
    4. kg m-1 s-1
    Answer and solution

    Answer: C

    Surface tension is force per unit length, so N m-1 (equally J m-2). N m-2 is pressure, and kg m-1 s-1 is the unit of viscosity (Pa s).

  11. MCQWarm-up

    When the temperature of a liquid is raised, its viscosity generally
    1. increases
    2. stays the same
    3. first increases and then decreases
    4. decreases
    Answer and solution

    Answer: D

    Hotter molecules overcome the intermolecular attractions more easily, so layers slide past each other more readily: viscosity falls. For gases the opposite happens.

  12. MCQWarm-up

    A liquid boils when its vapour pressure becomes equal to
    1. the external pressure on its surface
    2. one atmosphere always
    3. its critical pressure
    4. zero
    Answer and solution

    Answer: A

    Boiling begins when the vapour pressure equals the external pressure. It equals 1 atm only when the external pressure is 1 atm (normal boiling point).

  13. MCQWarm-up

    Above its critical temperature, a gas
    1. liquefies at any pressure
    2. cannot be liquefied however high the pressure
    3. liquefies only at very low pressure
    4. turns into a solid
    Answer and solution

    Answer: B

    Tc is the highest temperature at which a gas can be liquefied by pressure alone. Above it the molecules are too energetic for attraction to hold them as a liquid.

  14. NATWarm-up

    At STP (0 °C and 1 atm), 1 mol of an ideal gas occupies 22.4 L. What pressure in atm does 1 mol exert at 0 °C in a 11.2 L vessel?
    Answer and solution

    Answer: 2 atm (±0.01)

    At constant T and n, halving V doubles P: P = 1 × 22.4/11.2 = 2 atm.

  15. MCQWarm-up

    The lowest possible temperature, absolute zero, is
    1. -273.15 K
    2. 0 °C
    3. -273.15 °C
    4. -100 °C
    Answer and solution

    Answer: C

    0 K = -273.15 °C. Kelvin temperatures are never negative.

  16. MCQWarm-up

    Which pair correctly equals 1 atm?
    1. 101325 Pa and 100 mm Hg
    2. 1000 Pa and 760 mm Hg
    3. 10132.5 Pa and 7600 mm Hg
    4. 101325 Pa and 760 mm Hg
    Answer and solution

    Answer: D

    1 atm = 101325 Pa = 760 mm Hg (torr) = 1.01325 bar.

  17. NATStandard

    A gas has volume 300 mL at 27 °C. At constant pressure it is heated to 127 °C. Find the new volume in mL.
    Answer and solution

    Answer: 400 mL (±0.5)

    Idea: V/T is constant, with T in kelvin.

    T1 = 300 K, T2 = 400 K. V2 = 300 × 400/300 = 400 mL.

    Why people get this wrong: Using °C directly would give 1400 mL.

  18. NATStandard

    A rigid cylinder holds gas at 2.0 atm and 27 °C. What is the pressure at 87 °C, in atm?
    Answer and solution

    Answer: 2.4 atm (±0.01)

    Constant volume: P/T is constant. P2 = 2.0 × 360/300 = 2.4 atm.

  19. NATStandard

    5 L of gas at 2 atm and 300 K changes to 1 atm and 600 K. Find the new volume in litres.
    Answer and solution

    Answer: 20 L (±0.1)

    P1V1/T1 = P2V2/T2.

    V2 = 5 × (2/1) × (600/300) = 20 L.

  20. NATStandard

    Find the pressure (atm) of 0.5 mol of an ideal gas in a 2.0 L vessel at 300 K. (R = 0.0821 L atm K-1 mol-1)
    Answer and solution

    Answer: 6.16 atm (±0.03)

    P = nRT/V = 0.5 × 0.0821 × 300 / 2.0 = 12.315/2 = 6.16 atm.

  21. NATStandard

    Find the density of CO2 (M = 44 g/mol) in g/L at 1 atm and 300 K. (R = 0.0821)
    Answer and solution

    Answer: 1.79 g/L (±0.01)

    Idea: d = PM/RT.

    d = 1 × 44 / (0.0821 × 300) = 44/24.63 = 1.79 g/L.

  22. NATStandard

    A 10 L vessel contains 2 mol N2 and 3 mol O2 at a total pressure of 5 atm. Find the partial pressure of N2 in atm.
    Answer and solution

    Answer: 2 atm (±0.01)

    Idea: pi = xi Ptotal. x(N2) = 2/5 = 0.4.

    p = 0.4 × 5 = 2 atm.

  23. NATStandard

    A gas mixture has 4 g H2 and 32 g O2 at a total pressure of 3 atm. Find the partial pressure of H2 in atm.
    Answer and solution

    Answer: 2 atm (±0.01)

    n(H2) = 4/2 = 2 mol; n(O2) = 32/32 = 1 mol. x(H2) = 2/3.

    p(H2) = (2/3) × 3 = 2 atm.

    Why people get this wrong: Do not use mass fractions: 4 g and 32 g are not mole ratios.

  24. NATStandard

    Hydrogen is collected over water at 25 °C. The total pressure is 760 mm Hg and the vapour pressure of water at 25 °C is 24 mm Hg. What is the pressure of dry hydrogen in mm Hg?
    Answer and solution

    Answer: 736 mm Hg (±0.5)

    The collected gas is a mixture of H2 and water vapour. Ptotal = p(H2) + p(H2O).

    p(H2) = 760 - 24 = 736 mm Hg.

  25. NATStandard

    How many times faster does H2 effuse than O2 under the same conditions? (M: H2 = 2, O2 = 32)
    Answer and solution

    Answer: 4 (±0.01)

    rH2/rO2 = √(32/2) = √16 = 4.

  26. NATStandard

    A gas X takes 20 s to effuse through a pinhole. Under the same conditions the same volume of H2 takes 5 s. Find the molar mass of X (H2 = 2 g/mol).
    Answer and solution

    Answer: 32 g/mol (±0.5)

    Idea: time ∝ √M for equal volumes.

    tX/tH2 = √(MX/2) so 4 = √(M/2), M/2 = 16, M = 32 g/mol.

    Why people get this wrong: Time is inversely proportional to rate, so the heavier gas takes longer.

  27. NATStandard

    Find the r.m.s. speed of O2 (M = 0.032 kg/mol) at 300 K in m/s. (R = 8.314 J K-1 mol-1)
    Answer and solution

    Answer: 483.6 m/s (±1)

    urms = √(3RT/M) = √(3 × 8.314 × 300/0.032) = √(233831) = 483.6 m/s.

    Why people get this wrong: M must be in kg/mol when R is in J.

  28. MCQStandard

    The average kinetic energy of one mole of an ideal gas depends only on
    1. its absolute temperature
    2. its molar mass
    3. its pressure
    4. its volume
    Answer and solution

    Answer: A

    Average KE per molecule = (3/2)kT, and per mole (3/2)RT. It is independent of the gas, so two gases at the same T have the same average KE per molecule.

  29. MCQStandard

    In the van der Waals equation, the constant b is a measure of
    1. the intermolecular attraction
    2. the effective volume of the molecules (four times their actual volume per mole)
    3. the critical temperature
    4. the compressibility factor
    Answer and solution

    Answer: B

    b is the excluded volume per mole, b = 4 NAvmolecule. The attraction is measured by a.

  30. MCQStandard

    The unit of the van der Waals constant a is
    1. L mol-1
    2. atm L-2 mol
    3. L2 atm mol-2
    4. L atm mol-1
    Answer and solution

    Answer: C

    The term a n2/V2 has units of pressure, so a = atm × L2/mol2. The unit L mol-1 belongs to b.

← All topics