What it does
The Screen Test helps you find dead or stuck pixels, check smooth colour, and see what your display really is. Press Start full-screen test and the whole screen turns one colour at a time: black, white, red, green, blue and grey. Tap, click or use the arrow keys to step, and press Esc to leave. A pixel that stays lit on black, or dark on white, is stuck or dead. A gradient view shows banding, and the page measures your refresh rate and lists the screen’s size, depth, colour range and HDR support.
A pixels per inch box turns the screen’s diagonal size into sharpness. It all runs in your browser; nothing is sent anywhere. To test touch input use the touch Test, to see the rest of what your device reports the device Info, and to see how colour looks with colour blindness the colour vision simulator.
How to test your screen
- Clean the screen, then press Start full-screen test in a dim room.
- Step through the colours. On black look for bright dots and for glowing edges or patches; on white and the colours look for dark or odd-coloured dots.
- Press Esc to leave, then look at the gradient bars. They should be smooth, not stepped bands.
- Press Measure refresh rate and keep this tab in front for two seconds.
- Type your screen’s diagonal in inches to get pixels per inch.
What each part shows
- Colour cycle: solid colours that make dead (always black), stuck (always one colour) and hot (always lit) pixels easy to see.
- Gradient view: smooth ramps of grey, red, green and blue. Visible stripes mean banding, common on cheap panels or low colour depth.
- Refresh rate: how many times per second the browser can draw to the screen, usually 60, 90, 120 or 144.
- Screen facts: the size in physical pixels (width times height times display scaling), the size in CSS pixels the page sees, colour depth, HDR, colour range and orientation.
- Pixels per inch (PPI): how tightly the pixels are packed. Phones are often 400 or more, laptops 100 to 220.
Worked example
A laptop reports 1536 x 864 CSS pixels at a scale of 1.25, so its physical size is 1920 x 1080. With a 15.6-inch diagonal, PPI is the diagonal in pixels (about 2203) divided by 15.6, or roughly 141. The refresh test shows 60 Hz, so it is a standard panel.
If the readings look wrong
- Refresh rate reads 60 on a faster screen: set the display to its top rate in system settings, and turn off battery saver. Some browsers cap animation to 60 Hz when saving power.
- Number is lower than expected: the page was in the background or the computer was busy; measure again with this tab in front.
- Full screen does not open: some phones and in-app browsers block it, so the page uses an overlay that fills the window instead.
- Physical pixels look off: browser zoom changes the scale. Reset zoom to 100% first.
FAQs
Can I fix a dead pixel with this? This page finds them; it does not repair them. A stuck pixel (lit in one colour) sometimes recovers after gentle massage or time; a dead one rarely does. Check the warranty rules for your screen.
How many dead pixels are acceptable? Makers differ. Many follow ISO 9241-307 classes and accept a few; check your maker’s policy.
Why does HDR say no? HDR needs a capable screen, HDR switched on in the system and a browser that reports it.
Does the test store anything? No. Nothing is saved or sent.
Where the numbers come from
- Screen facts come from screen.width, screen.height, devicePixelRatio, screen.colorDepth and the CSS media queries dynamic-range and color-gamut (p3, rec2020); browsers may round or hide some of them.
- Refresh rate is measured here: the median gap between requestAnimationFrame timestamps over about two seconds, rounded to the nearest usual panel rate. Browsers can cap it (for example in power-saving mode).
- Pixels per inch is the diagonal in pixels divided by the diagonal in inches, the standard formula (checked in tests/device.mjs).
Standard scientific values, such as constants, atomic weights and melting points, are facts found in every textbook; we name where ours were checked. If you are an author or publisher and want a value, a credit or a table changed or removed, tell us and we will act quickly.
Last updated 2026-11-19.